11-26-2016, 10:54 AM | #301 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Wiring for rear buckets... |
Sponsored Links | |
11-26-2016, 04:20 PM | #302 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Prototyping headlights... |
11-26-2016, 05:06 PM | #303 |
RCC Addict Join Date: Jun 2016 Location: Germany
Posts: 1,364
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Light buckets for the front are incl. in the kit check your parttrees maybe it's there |
11-26-2016, 05:11 PM | #304 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log |
12-04-2016, 02:04 PM | #305 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log |
12-04-2016, 02:26 PM | #306 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Now as my Yeti is almost finished I started new RC project |
12-05-2016, 04:48 PM | #307 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log |
12-06-2016, 02:23 PM | #308 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Ha! Blue Monkeys shown up today! Rear trailing arms upper & lower... |
12-09-2016, 04:29 PM | #309 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
All installed! Swapped swaybar also... |
12-10-2016, 07:29 AM | #310 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log |
12-10-2016, 08:20 AM | #311 |
Newbie Join Date: Jan 2015 Location: Chicago
Posts: 8
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Looks good. How do you like the blue monkeys so far?
|
12-10-2016, 09:07 AM | #312 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log |
12-10-2016, 09:10 AM | #313 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log Dont know yet, will try them next weekend. Hopefuly with some snow I will tell you later...
Last edited by TomFrajer; 12-11-2016 at 03:06 AM. |
12-10-2016, 10:32 AM | #314 |
RCC Addict Join Date: Jun 2016 Location: Germany
Posts: 1,364
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log |
12-12-2016, 07:15 AM | #315 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Maybe it looks like everything is going on smoothly. No it is not! :-D Im reporting only success stories here and did not mention that I trashed a receiver (probably shorted it out during my initial testing of lights setup), I made some of the cables too short and have to redo them and finally yesterday when I wanted to rebuild my tranny I stripped two screws :-D Have to buy screw extractors and learn some new skills. Holy cow! |
12-12-2016, 02:00 PM | #316 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Holy shit! More stripped screws! Should think twice how and where Im using glue... Robinson looks still pretty good. This is first time taken out for inspection. Tranny is in better shape than expecded. Only one bearing about to fail - rubber shield out. |
12-12-2016, 04:31 PM | #317 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
Transmission is rebuilt. I put two bushings to the output shaft... |
12-12-2016, 04:49 PM | #318 |
RCC Addict Join Date: Jun 2016 Location: Germany
Posts: 1,364
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log
The rounded screws are the reason i changed all screws to 12.8 grad hardend steel torx im curious how the bushings will work in the tranny on my rebuild i had 2 rusted bearings (stock) in the tranny and lots of dirt, as you can see in my thread i put 2 extra bearings in my tranny hoping to hold the dirt outside.. |
12-13-2016, 01:18 AM | #319 | |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log Quote:
| |
05-22-2017, 03:31 PM | #320 |
Quarry Creeper Join Date: Jun 2016 Location: Prague - Czech Republic
Posts: 279
| Re: Life of one YETI - Tom Frajer's Axial Yeti build log |
Life of one YETI - Tom Frajer's Axial Yeti build log - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tom G’s RedBull Yeti | Tom G | Axial Yeti | 3 | 07-05-2016 08:45 PM |
Yeti, Set, GO!!! FastEddy Bearings for the Axial Yeti | FastEddy | Axial Yeti | 13 | 04-21-2015 07:33 AM |
Yeti Located - Axial Yeti bashing | eunique | Scale Videos! | 0 | 02-12-2015 08:42 AM |
Yeti Located - Axial Yeti bashing | eunique | Scale Videos! | 0 | 01-09-2015 02:10 AM |
| |