|
| LinkBack | Thread Tools | Display Modes |
10-04-2018, 08:28 AM | #1 |
Rock Stacker Join Date: Feb 2016 Location: Gorham, Maine
Posts: 83
| Any use the SSD D60 axle?
Thinking about changing over to the SSD D60 rearend with HD wideners, is anyone running one? Smoked my plastic carrier and locker, so it's out of the truck anyhow for a rebuild. As much as I like the Vanquish Curries, I can't justify dropping that kind of money right now
|
Sponsored Links | |
10-04-2018, 12:01 PM | #2 |
RCC Addict Join Date: Feb 2016 Location: Santa Maria, CA
Posts: 1,751
| Re: Any use the SSD D60 axle?
Yep. I've been running one since they came out (1 1/2 years?) in my Wraith, formerly brushless/4s sand toy, now brushed crawler. After that much daily use, I finally ground through the bottom of the housing, E6000 and a scrap of sheet metal solved that. No complaints whatsoever. A friend of mine also runs one in the back of his Yeti TT with the wide axle conversion kit, and it hasn't had any issues at all. That truck gets run at the local track (which resembles demolition derby more often than not!) about once a month, and goes to the dunes often as well (think: "Thelma and Louise" jumps!) |
10-04-2018, 12:47 PM | #3 |
Rock Stacker Join Date: Feb 2016 Location: Gorham, Maine
Posts: 83
| Re: Any use the SSD D60 axle?
Thanks, got one on order,
|
10-04-2018, 02:21 PM | #4 |
Pebble Pounder Join Date: Jan 2017 Location: Maine
Posts: 196
| Re: Any use the SSD D60 axle?
I used one in a Wraith. Great axle. While it is not as strong as an aluminum axle it is definitely a huge step up from the stocker.
Last edited by Rumpelhardt; 10-04-2018 at 02:27 PM. |
10-04-2018, 02:53 PM | #5 |
RCC Addict Join Date: Oct 2014 Location: UK
Posts: 1,516
| Re: Any use the SSD D60 axle?
Thanks guys. A new aluminium upper link mount/truss for the HD D60 rear axle will be released next week. Waiting for photos to be done...
|
10-04-2018, 04:02 PM | #6 | |
Rock Stacker Join Date: May 2016 Location: Australia
Posts: 86
| Re: Any use the SSD D60 axle? Quote:
I am interested because my plastics are close to being worn through as well. But like you there is no way I’m spending that amount of money on RC / vanquish axles. | |
10-04-2018, 04:37 PM | #7 |
I wanna be Dave Join Date: Aug 2016 Location: Orange County, CA
Posts: 3,643
| Re: Any use the SSD D60 axle? I'd be really interested in that aluminum upper link mount/truss. It'd make me worry less about the link mount area on hard impacts/landings.
|
10-05-2018, 05:01 AM | #8 | |
RCC Addict Join Date: Oct 2014 Location: UK
Posts: 1,516
| Re: Any use the SSD D60 axle? Quote:
A matching front axle was designed but never produced because we didn't think it would sell enough as it would be too similar to the stock front axle. For the front to match you can use this diff cover on the front axle: HD D60 Front Diff Cover for Wraith / SMT10 / Bomber (Black) Centered pumpkin does not reduce capability at all and it is more scale and stronger than the stock rear. Overall a better design and product. | |
10-05-2018, 08:53 AM | #9 |
Rock Stacker Join Date: Feb 2016 Location: Gorham, Maine
Posts: 83
| Re: Any use the SSD D60 axle?
Thanks SSD and the rest that responded. Looking forward to trying it out!
|
10-12-2018, 03:19 AM | #10 |
RCC Addict Join Date: Oct 2014 Location: UK
Posts: 1,516
| Re: Any use the SSD D60 axle?
Just released the aluminum upper mount for the HD D60 centered rear: *HD D60 Centered Rear Axle Aluminium Upper Mount Last edited by SSD; 10-12-2018 at 03:22 AM. |
10-12-2018, 06:57 AM | #11 |
Yashua Join Date: Sep 2010 Location: Learn the parable of the fig tree
Posts: 3,661
| Re: Any use the SSD D60 axle?
Yes it's a great housing and really makes the rear of my rig look "correct". And yes too on the front diff cover, makes it a round house match. Last edited by CREEPERBOB; 10-12-2018 at 07:06 AM. |
10-12-2018, 07:00 AM | #12 |
Yashua Join Date: Sep 2010 Location: Learn the parable of the fig tree
Posts: 3,661
| Re: Any use the SSD D60 axle? |
10-12-2018, 08:15 AM | #13 |
I wanna be Dave Join Date: Aug 2016 Location: Orange County, CA
Posts: 3,643
| Re: Any use the SSD D60 axle? Yeah my current one is working fine, but the original one that came with my axle was really soft for some reason or maybe had a stress on it that caused it to crack when putting the screw into the mount. Anyway, I think it was a one off defective part and Chris took care of me with a replacement which is working fine.
|
11-12-2018, 09:42 AM | #14 |
I wanna be Dave Join Date: Dec 2016 Location: san diego
Posts: 2,723
| Re: Any use the SSD D60 axle?
Had my ssd d60 rear axle almost 2 years now and its holding up GREAT! You simply can't go wrong for this price. I jad a vanquish axle on there but the shafts bent. For the cost of new shafts I got a whole new axle set! And its lighter, reducing rear unsprung weight and that means less bronco bucking! Thanks ssd! *note you will have to flip your front diff so they spin the same direction! Then swap 2 wires on your motor but it's a piece of cake and WORTH IT! ** Found a pic of my d60 equipped yeti... Last edited by Shinchu; 11-12-2018 at 11:34 AM. |
11-12-2018, 11:32 AM | #15 | |
Moderator Join Date: Aug 2017 Location: Readsboro, VT
Posts: 2,053
| Re: Any use the SSD D60 axle? Quote:
| |
11-19-2018, 01:33 PM | #16 |
Rock Stacker Join Date: May 2016 Location: Australia
Posts: 86
| Re: Any use the SSD D60 axle?
I’m thinking about getting the D60 and the front diff cover for my wraith but have a couple of questions before ordering. Nothing more annoying than ordering new stuff and realise your missing something when you start to build. According to the description it takes a larger pinion input bearing - what size do I need? I’ve note above you need to reverse motor rotation and flip front axle? I’m running sensored Do I get to keep running my vanquish lockouts? Last edited by Mendoza; 11-19-2018 at 01:35 PM. |
11-19-2018, 02:03 PM | #17 |
RCC Addict Join Date: Feb 2016 Location: Santa Maria, CA
Posts: 1,751
| Re: Any use the SSD D60 axle?
The larger 13mm pinion bearing is included. Your ginormous AR60 lockouts are no longer needed since the D60HD was designed specifically as a full width rear axle. The front diff needs the ring gear on the passenger side (umm maybe not since you are in upside down land?... looking straight at the front of the car, ring gear on left side) to spin the same direction as the D60HD rear axle. Can't comment on motor rotation since I don't know what direction you're currently running, but mine is still running standard rotation.
|
11-19-2018, 07:24 PM | #18 |
Rock Stacker Join Date: May 2016 Location: Australia
Posts: 86
| Re: Any use the SSD D60 axle?
Lol... upside down land. The Wraith is an American vehicle and I haven’t done a conversion therefore the ring gear remains on the (US) passenger side as you’ve described. I could be wrong but I didn’t think the d60 comes with the pinion input bearing, only drive shaft bearings? |
11-21-2018, 09:42 AM | #19 |
I wanna be Dave Join Date: Dec 2016 Location: san diego
Posts: 2,723
| Re: Any use the SSD D60 axle?
i literally dropped my pumpkin guts right in, and was off and driving once i flipped the front diff and motor wires. no more lockouts going loose on me and bending shafts. its lighter and reduced bronco bucking effect. again this SSD axle replaced a vanquish axle on my yeti and i couldn't be more happy. HUGE rooster tails of wet sand on the beach. this rear end is the business. you wont be disappointed. Last edited by Shinchu; 11-21-2018 at 09:45 AM. |
11-24-2018, 07:12 PM | #20 |
Rock Stacker Join Date: Feb 2016 Location: Gorham, Maine
Posts: 83
| Re: Any use the SSD D60 axle?
Got my Yeti all set up with the HD60, it looks good, now just waiting until spring and take it out trailing! At some point I will be getting one for my Bomber and sons Wraith. Thanks for the help!
|
Any use the SSD D60 axle? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SSD D60 axle question | Truckmechanic304 | Axial SCX-10 | 6 | 05-28-2016 02:13 PM |
New SSD Rear Axle Shafts for D60 Wide Axle (XR) | SSD | Axial SCX-10 | 0 | 05-17-2016 10:51 AM |
Offset SSD D60 axle | ctrwannabe | General Crawlers | 18 | 04-07-2016 08:58 PM |
| |