Sacramento Scaler GTG/Comps

[tciappa]

yea man hella nice session. guna be huge you all will see

[Jrob]

Thanks for coming guys! I love the pic of the tuber trying to tow the rig over!

[KBess1110]

Ha I tried!

Sent from my VZW Rezound

[KBess1110]

Here's a better pic of what was going on...the other pic shows my rear sticking way up in the air while tryna pull tciappa out and over lol fun stuff


Sent from my VZW Rezound

[minicrawlerguy530]

Damn jeff the yard is looking really good. I need to get out there to try it out

[minicrawlerguy530]

I have a tire for the tire pit

[Jrob]

Originally Posted by minicrawlerguy530

I have a tire for the tire pit

Woo hoo! Bring it over the course is getting pretty sweet thanks to everyones hard work and couldn't be done with out you guys! Thanks again for helping build us all one sick place to get our scale on!

[tciappa]

yea its gettn huge bout to take up the back yard then go through the house then into the garage. lol

[Jrob]

Originally Posted by tciappa

yea its gettn huge bout to take up the back yard then go through the house then into the garage. lol

Lol!!!!! We could definetly loop it around my property and use all those sick roots in there. We new to get the wood and start framing the mtn.

[Jrob]

Went and test the tow rig and deer creek man did it impress me here are a few pics from the guys and I.

[stevew]

Originally Posted by dirty530crawlers

Went and test the tow rig and deer creek man did it impress me here are a few pics from the guys and I. Attachment 195316
Attachment 195317
Attachment 195318
Attachment 195319
Attachment 195321
Attachment 195322
Attachment 195323
Attachment 195324
Attachment 195325
Attachment 195326
Attachment 195327

what a failure!!!!! no video of the tow rig in action??? ;)

[Jrob]

I know. I've been slacking lately on videos.

[stevew]

Originally Posted by dirty530crawlers

I know. I've been slacking lately on videos.

well i dont know about lately but i can wait to see it in person one of these days. that rtr crawler I bought should be here tomorrow.I've been working on the tlt crawler all day but still waiting on my nuts n bolts to get here well that and everything else lol

oh i did re-cover the headliner in my blazer today too finally got the interior back together. Monday i have a chrome bumper coming so i should be able to finish the front end by tue-wed.

[stevew]

have a question for you guys.this is the esc that came with the rig GTB Brush/Brushless ESC
it say's 6v bec so i ordered my servo and it says like 611oz@7.4v .please correct me if im wrong but wont the servo only see 6v? unless i wire it strait to the battery correct? I'm sure i wont need 600oz BUT you never know. LOL

[Jrob]

Originally Posted by stevew

have a question for you guys.this is the esc that came with the rig GTB Brush/Brushless ESC
it say's 6v bec so i ordered my servo and it says like 611oz@7.4v .please correct me if im wrong but wont the servo only see 6v? unless i wire it strait to the battery correct? I'm sure i wont need 600oz BUT you never know. LOL

The 6v is an internal bec in that esc. To Get the 7.4v you need to get a castle
Bec and you can program it to 7.4 volts and it by passes the bec in the esc. Hope that helps. Honestly the castle bec is one of the best 25$ you can spend on your rig.

[sumquak]

Originally Posted by stevew

have a question for you guys.this is the esc that came with the rig GTB Brush/Brushless ESC
it say's 6v bec so i ordered my servo and it says like 611oz@7.4v .please correct me if im wrong but wont the servo only see 6v? unless i wire it strait to the battery correct? I'm sure i wont need 600oz BUT you never know. LOL

most esc bec's don't put out enough amps to power it and a high torque servo. add a CC bec and pull the red wire on the esc plug as directed.

if you dont have a castle link, have the hobby shop you get the bec from to program it to the voltage you want, if they won't for free, or can't, find another hobby shop.

i y-harness mine with the servo to the receiver plug and never a glitch issue.

[nissan_driver24]

What sumquak said but another thing to remember some receivers won't take over 6 volts so if that's the case wire the red and black wire from the external bec straight to the servo and only connect the signal wire (white or yellow) to the receiver. Don't pull the red wire on your esc so your receiver could be powered by esc bec (internal bec)... hope this all makes sence....

[jscalecrawler]

thinkin of doin a night run saturday night? anyone?

[stevew]

Originally Posted by nissan_driver24

What sumquak said but another thing to remember some receivers won't take over 6 volts so if that's the case wire the red and black wire from the external bec straight to the servo and only connect the signal wire (white or yellow) to the receiver. Don't pull the red wire on your esc so your receiver could be powered by esc bec (internal bec)... hope this all makes sence....

yes that is the problem i ordered the flysky and it will only run up to 6v

[wiseman1907]

still working on it..