|
| LinkBack | Thread Tools | Display Modes |
06-10-2012, 04:56 PM | #1 |
Newbie Join Date: Jun 2012 Location: Kingwood
Posts: 6
| I don't know what is wrong
I just got a wraith of eBay and it has the timbuk2 wraith edition on it I got a new futaba 4pl-2.4g today. Binded it and the steering works but there is no throttle and the esc does not blink or change any lights when I move the throttle all the lights are on
|
Sponsored Links | |
06-10-2012, 05:10 PM | #2 |
Quarry Creeper Join Date: Dec 2011 Location: Doylestown
Posts: 225
| Re: I don't know what is wrong
Silly question but did you recheck all the connections to the motor as also the RX
|
06-10-2012, 05:17 PM | #3 |
Newbie Join Date: Jun 2012 Location: Kingwood
Posts: 6
| Re: I don't know what is wrong
Ya all good
|
06-10-2012, 05:27 PM | #4 |
Quarry Creeper Join Date: Apr 2012 Location: Marietta
Posts: 287
| Re: I don't know what is wrong
If it's a Novak esc then it's a very real possibility that it is bad!
|
06-10-2012, 05:32 PM | #5 |
Newbie Join Date: Jun 2012 Location: Kingwood
Posts: 6
| Re: I don't know what is wrong
How do I know this is my first rc and I dont no right from left on this
|
06-10-2012, 07:38 PM | #6 |
Quarry Creeper Join Date: Apr 2012 Location: Marietta
Posts: 287
| Re: I don't know what is wrong
Install another esc! If everything works than throw the Novak in the trash and then go get your truck dirty!
|
06-10-2012, 07:57 PM | #7 |
Pebble Pounder Join Date: Dec 2011 Location: Monterey
Posts: 194
| Re: I don't know what is wrong
if all the lights are on check to make sure the esc is plugged into your reciver correctly, as in not backwards, 180*, it might be as simple as that, im having a similar issue with a differnt brand esc,
|
06-10-2012, 09:01 PM | #8 |
RCC Addict Join Date: Nov 2011 Location: the not so white north
Posts: 1,299
| Re: I don't know what is wrong
Did you calibrate the esc with the radio/tx? If not look for some instructions online for the esc and do that. If that dosen't work then try another esc and go from there.
|
08-16-2012, 07:58 PM | #9 |
Newbie Join Date: Aug 2012 Location: Sandhills
Posts: 3
| Re: I don't know what is wrong
x2 on what The Blacksheep posted. Check the ESC to RX connection on the ESC side. I reversed mine when relocating the ESC on my Wraith and had the same results as you. |
Tags |
electronics |
I don't know what is wrong - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What am i doing wrong | losikid | Tools, and Procedures | 6 | 08-26-2011 06:58 AM |
Something is wrong... | kinglooie | Electronics | 2 | 04-03-2011 07:18 PM |
Not sure what went wrong. | zagscrawler | Team Losi Comp Crawler | 15 | 05-05-2010 07:37 PM |
Theres Something Wrong???? | billy_06evoix | General Crawlers | 1 | 03-28-2007 07:15 PM |
| |