12-26-2012, 08:44 AM | #1 |
Newbie Join Date: Dec 2012 Location: Bismarck
Posts: 6
| Axial esc problems
I'm having trouble with the stock esc in my scx10. It is only sending short bursts to motor even if I hold it full throttle. I tried to reprogram it but it still does it. Any help would be appreciated
|
Sponsored Links | |
12-26-2012, 10:05 AM | #2 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Re: Axial esc problems
How old is the motor? Maybe it needs a service? What battery (chemistry, cell count, mah, "C" rating if LiPO)? Did this work fine before but now has an issue? |
12-29-2012, 10:14 AM | #3 |
Newbie Join Date: Dec 2012 Location: Bismarck
Posts: 6
| Re: Axial esc problems
It was still the stock one, had it about a year and a half. I have been running 7.2 volt 6cell 4500 mah battery packs through it. It was working fine when I last ran it bout two weeks ago.
|
12-29-2012, 10:17 AM | #4 |
RCC Addict Join Date: Feb 2010 Location: a house
Posts: 1,986
| Re: Axial esc problems
thats pretty old for a stock motor, the brushes might be shot
|
12-29-2012, 10:30 AM | #5 |
I joined the Band! Join Date: Jul 2011 Location: Philippines
Posts: 1,405
| Re: Axial esc problems
also i had problems with my 7.2v 6 cell.. i could drive it slow and get a burst of speed.. but once i punched it the truck jerked and wouldnt go.. went lipo and never looked back (this cheap guy was convinced lipo or nothing!!!!) |
12-29-2012, 04:55 PM | #6 |
Newbie Join Date: Dec 2012 Location: Bismarck
Posts: 6
| Re: Axial esc problems
I put in a traxxas water proof esc last night and it solved the problem. But I was hoping to be able to run the stock esc cause I know it's lipo compatible.
|
12-29-2012, 06:24 PM | #7 |
I joined the Band! Join Date: Jul 2011 Location: Philippines
Posts: 1,405
| Re: Axial esc problems
well q for ya.. is it under warranty? was this a xmas time deal.. or have you had it for a long time?
|
12-29-2012, 09:00 PM | #8 |
Newbie Join Date: Dec 2012 Location: Bismarck
Posts: 6
| Re: Axial esc problems
I've had it for some time now.
|
12-30-2012, 02:34 PM | #9 |
Pebble Pounder Join Date: Jan 2012 Location: Locust Hill
Posts: 184
| Re: Axial esc problems
guess it's a little late, but what battery connector are you running. If still the original tamiya style, I've had the same issue. Just makes a poor connection for some reason. Worth a look, maybe you can still use it after all.
|
12-30-2012, 10:27 PM | #10 |
Newbie Join Date: Dec 2012 Location: Bismarck
Posts: 6
| Re: Axial esc problems
I was using the stock tamiya going through an adapter to traxxas style plug on the battery I'll look into it a bit more. Thanks for the help
|
12-30-2012, 10:34 PM | #11 |
Pebble Pounder Join Date: Oct 2011 Location: Murfreesboro
Posts: 196
| Re: Axial esc problems
If thats a Xl5 Traxxas Esc than it is Lipo safe as well. Just run you a bec and you can run 3s all day.
|
12-31-2012, 12:00 AM | #12 |
Quarry Creeper Join Date: Dec 2008 Location: Australia
Posts: 269
| Re: Axial esc problems
Is the Axial esc set for Auto-LiPo (default setting)? A fully charged NiMh battery can charge to 9+ volts so Auto-LiPo may see the NiMh battery as a 3 Cell LiPo, when you pull the throttle the NiMh battery will drop below 9 volts quickly so the ESC may be hitting LVC. Turn Auto-LiPo off and try again or move up to LiPo's, you will never look back! The only thing you will wonder is why you stuck with NiMh batteries for so long. |
01-01-2013, 02:10 PM | #13 |
Newbie Join Date: Dec 2012 Location: Bismarck
Posts: 6
| Re: Axial esc problems
How do I go about changing the default settings on it?
|
Axial esc problems - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ESC problems.. | xjcralwer7 | Electronics | 43 | 06-22-2012 07:16 PM |
possible esc problems? | j_the_pirate | Electronics | 5 | 05-16-2012 04:55 PM |
Problems with Axial AE-2 esc | nathan000 | Axial Wraith | 0 | 03-07-2012 04:40 PM |
Axial AE-1 ESC Problems | FireWire79 | Axial AX-10 Scorpion | 6 | 09-13-2010 07:50 PM |
HELP ME axial esc problems!! | Streamcrawler | Electronics | 3 | 05-03-2010 06:14 PM |
| |