|
| LinkBack | Thread Tools | Display Modes |
08-25-2014, 07:51 AM | #1 |
Newbie Join Date: Feb 2013 Location: USA
Posts: 5
| Where do LEDs wire in with bec?
I found this diagram but not sure where to tap in with LEDs. Should power go to led controller from bec then to servo? Its a sidewinder 3 and castle bec. Gt power led kit and stock axial radio. |
Sponsored Links | |
08-25-2014, 08:38 AM | #2 |
Newbie Join Date: Feb 2013 Location: USA
Posts: 5
| Re: Where do LEDs wire in with bec?
I'm thinking leave the power wires going from ESC to LEDs and put power wires from bec to servo and signal wire fro LEDs. Sound right?
|
08-25-2014, 08:46 AM | #3 |
RCC Addict Join Date: Sep 2011 Location: Beavercreek, Oregon, USA
Posts: 1,950
| Re: Where do LEDs wire in with bec?
Unless you have a high power light bar you can power the LEDs off of a spare channel on the receiver. I would read this thread first. How to wire LEDs Then check out the LED controllers. HeyOK's RC Electronics items (all in one place) I use the headlight/brake light which has connects on CH2 and has a pass thru for the ESC signal. Last edited by k7zpj; 08-25-2014 at 08:49 AM. |
Where do LEDs wire in with bec? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to wire LEDs | heyok | Electronics | 160 | 11-01-2022 12:06 PM |
BEC into Batt/Bind Plug on 4ch SR410 w/LEDS on TF2? | Reqlis | Electronics | 5 | 08-16-2013 08:15 AM |
Wire for LEDs. | Mirage | Electronics | 3 | 03-16-2012 07:59 PM |
Easiest way to wire LEDs in body | AdverseCity | General Crawlers | 3 | 01-22-2012 09:03 PM |
how do I wire red LEDs so it will light up during braking? | ussprinceton2004 | Newbie General | 0 | 03-07-2008 05:33 PM |
| |