11-04-2012, 05:44 PM | #1 |
Pebble Pounder Join Date: Aug 2012 Location: Canada
Posts: 184
| Dual AE2's on my dx3c
ok guys i have two axial ae2 speedies sitting around ..I just picked up a Berg the other day and am wondering if i can throw my two ae2's in it and run them with my dx3c..now i,m not looking for proportional or anything like that just wondering if i can run them in it ..i,m new to this whole dual esc , or one esc with dig , and wannamix(or wantmix) whatever lol..ive been reading and looking but figured id start my own thread ..any help is greatly appreciated..
|
Sponsored Links | |
11-04-2012, 05:58 PM | #2 |
RcBros Hobbies Join Date: Nov 2005 Location: Oregon
Posts: 4,646
| Re: Dual AE2's on my dx3c
You will either need the punk dig or novak dig , wantamix to run the dx3c radio. I would suggest trying to sell that radio and picking up a Futaba 4PL
|
11-04-2012, 06:06 PM | #3 |
Pebble Pounder Join Date: Aug 2012 Location: Canada
Posts: 184
| Re: Dual AE2's on my dx3c
I,m actually leaning towards the flysky gt3b with the hack ..seems to be the cheapest alternative to anything with good results ..but as i should have mentioned i,m on a budget and i,m unable to put my intial choice into play..so for now i,m just looking to ditch the single novak rooster if ya know what i mean |
11-04-2012, 06:34 PM | #4 |
RcBros Hobbies Join Date: Nov 2005 Location: Oregon
Posts: 4,646
| Re: Dual AE2's on my dx3c
Sounds like a punk dig would be your cheapest bet.
|
11-04-2012, 06:51 PM | #5 |
Pebble Pounder Join Date: Aug 2012 Location: Canada
Posts: 184
| Re: Dual AE2's on my dx3c
I see you have a lot more posts then me haha..i,ve been looking in the vendor section and cant find the punk digs ..can you maybe steer me in the direction of a link |
11-04-2012, 06:52 PM | #6 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: Dual AE2's on my dx3c
with 2 AE2's, you can go with The Dig Switch from Novak.. they are made to work with 2 esc's.. and the cost is way cheaper than a punk dig.. punk dig about 65.00 novak dig switch about 19.99 last i checked... |
11-04-2012, 06:56 PM | #7 | |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: Dual AE2's on my dx3c Quote:
you most likely have to get one of those from punkRC web site.. or a used one in the forsale section their customer service is poor to say the least......... and i went through 4 of them...... would not ever use one again......... | |
11-04-2012, 07:21 PM | #8 |
Pebble Pounder Join Date: Aug 2012 Location: Canada
Posts: 184
| Re: Dual AE2's on my dx3c Thanks muchly for the advice dude ..ill look into the novak dig switch .. |
11-04-2012, 07:35 PM | #9 |
RcBros Hobbies Join Date: Nov 2005 Location: Oregon
Posts: 4,646
| Re: Dual AE2's on my dx3c
I did not realize the novak dig was so cheap. I apologize! I too didn't have great customer service with punk which is why I finally bit the bullet for dual esc's and a 4pl. Looks like you can pick up the Novak Dig from TCS for $35 Novak The Dig: Electonic Dig Unit for Dual System Crawlers #5450*-*Miscellaneous*-*-Electronics*-*The Crawlers Store LLC Hopefully that helps |
11-04-2012, 08:13 PM | #10 |
RCC Addict Join Date: Jan 2010 Location: Dallas
Posts: 1,848
| Re: Dual AE2's on my dx3c
Seams to me the idea of the hacked gt3b is the way to get what you want out of all this. I realize it ain't 19 bucks but it would work. I also used a wantasummit and it worked really well. Pretty cheap and gives you propo. I would by far do that way before looking at the novak or punk.
|
11-04-2012, 10:25 PM | #11 |
I wanna be Dave Join Date: Aug 2008 Location: Deep in Swing Town
Posts: 3,011
| Re: Dual AE2's on my dx3c
Last i knew, Jakes Performance Hobbies had the Novak Dig for 19.99 and if you run 2 esc's that are programable, then you can set the F/r differently.. i run two FXR's with a novak dig, F/R are set with different throttle profiles and works great........ |
11-05-2012, 04:40 AM | #12 |
Pebble Pounder Join Date: Aug 2012 Location: Canada
Posts: 184
| Re: Dual AE2's on my dx3c
thanks for all the info guys appreciate it greatly..i,m thinking i,m going to order the fs gt3b from losikid and pick up a couple a tekin fxr speedies...if not to much trouble could someone locate me a half decent pick or a wiring diagram for how to wire the esc's ? thanks
|
Dual AE2's on my dx3c - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DX3C/Dual sidewinder trouble | minicrawler1 | Electronics | 6 | 05-23-2012 01:33 PM |
Dual ESC and DX3C | Colgout | Electronics | 8 | 05-02-2012 03:51 PM |
Airtronics M11 Settings for Dual Motor Dual Servo Crawlers | John Hallman | Electronics | 7 | 10-07-2010 11:34 PM |
Dual 3s Lipo/Dual Sidwinders/Dual 4400KV Inrunners Setup Help Needed. | TheHeadHunter | Electronics | 16 | 08-17-2008 05:21 AM |
| |