VS4-10 Ultra

[Panther6834]

Originally Posted by Joshs4x4toyz

That is something very possible to build as the VFD setup with the skid is still narrower than the capra skid, and there is ample room within...since you brought it up that is somethin that would make another neat build. Say you wanted a narrower width than the capra (for whatever reason). You could run a capra cage, VFD on custom skid, and the new portals if they are narrower (only my assumption).

EDIT: So i just measured and the VFD skid is 2mm narrower than the capra (78mm and 80mm)..... So its right on for a fun swap if youre interested!

Ok, now I understand the REAL danger of having gotten back into surface RC...I need at least 2 full-time jobs...lol

~ More peace, love, laughter & kindness would make the world a MUCH better place

[LSXGMC]

If this is a plastic-caged Ripper with portal axles I am going to be one broke, albeit extremely happy, mofo

[JatoTheRipper]

Originally Posted by LSXGMC

If this is a plastic-caged Ripper with portal axles I am going to be one broke, albeit extremely happy, mofo

Same!

I just watched Harley's video and he mentioned that the guy that owns Lasernut is working with Horizon Hobby so that might be a plastic-caged rig as well.

[GA Dawg]

Maybe they'll drop the price on the Pro when the Ultra comes out.

[Panther6834]

Originally Posted by GA Dawg

Maybe they'll drop the price on the Pro when the Ultra comes out.

Possible...but, unlikely.

~ More peace, love, laughter & kindness would make the world a MUCH better place

[mikemcE]

Another point adding to the portaled VFD is the new 21%OD gearset just introduced, hope for molded ripper styled Ultra 4 Rig...... Josh loves those, and he played with the lasers, and mentioned /showed lasernuts two rigs...... What would you buy??


Hang up and Drive

[Col_Sanders]

I'm guessing just by the name Ultra, it will be more than just a set of portals on a 410 chassis. A scale Ultra4 rig would be pretty cool. Hopefully molded plastic though...the Ripper is impressive, but no way I'm dropping that kinda coin.

[LSXGMC]

Originally Posted by Col_Sanders

I'm guessing just by the name Ultra, it will be more than just a set of portals on a 410 chassis. A scale Ultra4 rig would be pretty cool. Hopefully molded plastic though...the Ripper is impressive, but no way I'm dropping that kinda coin.

If it is indeed a cage, it’ll be plastic I’m sure. The Ripper was cool but unsustainable. They seem to have no issues with moulded plastic parts and they use a really nice plastic, so I could very much see a plastic cage cad being released. Here’s to hoping!

[Panther6834]

Time to start praying to the RC gods ???

~ More peace, love, laughter & kindness would make the world a MUCH better place

[Screwfly]

Originally Posted by Panther6834

Ok, now I understand the REAL danger of having gotten back into surface RC...I need at least 2 full-time jobs...lol

~ More peace, love, laughter & kindness would make the world a MUCH better place

Tell me about it!!!! My wish list is getting longer.

[JatoTheRipper]

Originally Posted by LSXGMC

If it is indeed a cage, it’ll be plastic I’m sure. The Ripper was cool but unsustainable. They seem to have no issues with moulded plastic parts and they use a really nice plastic, so I could very much see a plastic cage cad being released. Here’s to hoping!

I regret not getting a Ripper, but I wouldn't want to run it for fear of wrecking it.

[sherbs]

Kind of goes with the "No Response" that I received when I asked about a portal axle from Brandon in the "Vanquish" Section. If it is a new vehicle I am going to guess we will be holding are hands on our behind before Vanquish will release just the front offset portal. Kind of excited to see what it ends up being.

[LSXGMC]

Well, no cage. Just a portal’d VS410 Pro. MSRP $829.99

[svt923]

Originally Posted by LSXGMC

Well, no cage. Just a portal’d VS410 Pro. MSRP $829.99

My wallet is relieved because there would have been no choice but to buy a portal axle tube chassis truck.

[Joshs4x4toyz]

Originally Posted by LSXGMC

Well, no cage. Just a portal’d VS410 Pro. MSRP $829.99

ah bummer, still a good piece to see

[LSXGMC]

Originally Posted by svt923

My wallet is relived because there would have been no choice but to buy a portal axle tube chassis truck.

Couldn’t agree more. 100 percent.

[Trout74]

I dont have a VS4-10 yet, was going to get one, but ill wait for this. I like it. Wonder when it will be available. And where did you get those pictures?
Thx

[Brandon]

Here you go!

https://www.vanquishproducts.com/vehicle-kits/

[JatoTheRipper]

Originally Posted by LSXGMC

Well, no cage. Just a portal’d VS410 Pro. MSRP $829.99

As expected. Not surprising as it's much more cost effective for a small company like Vanquish to make small iterations rather than release a brand new chassis platform only a year or two after the release of the first.

Now I'm not sure if I'll buy a Pro or an Ultra...

Video was just posted.

[odomandr]

Originally Posted by Brandon

Here you go!

https://www.vanquishproducts.com/vehicle-kits/

Not available until November?????

Capra width portals? Or are they the same width as previous portals or as 10ii axles?

No universals just cvd axles. Any additional angle in comparison to previous portals??

Nice progression for the vs410. I’m looking forward to the next non vs model too though