10-11-2020, 10:17 AM | #1 | |||
Quarry Creeper Join Date: Jun 2019 Location: Sunshine Coast, BC, Canada
Posts: 246
| servo issue
Today I had an issue with my spektrum 6240 servo. A great servo, fast & powerful, never had any issue at all until today after 5 mins on the trails a strange spinning sound appeared and nothing turned anymore. Back home, I took a closer look to find out that the servo gear motor has been destroyed by the gear next to it. I contacted spektrum to see what they can do to fix this. Stay tuned…
| |||
Sponsored Links | |
10-11-2020, 11:02 AM | #2 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: servo issue
That’s why they sell a replacement gearset with pins. If EP’s aren’t set, you can destroy gears if you’re bound up. https://www.amainhobbies.com/spektru...UaAvjHEALw_wcB Hang up and Drive |
10-11-2020, 11:11 AM | #3 |
Quarry Creeper Join Date: Jun 2019 Location: Sunshine Coast, BC, Canada
Posts: 246
| Re: servo issue
I've seen this kit, but unfortunately this won't help me because the gear that is destroyed is on the motor, and it looks like that small gear can't be changed...
|
10-11-2020, 12:21 PM | #4 |
Rock Crawler Join Date: Mar 2019 Location: Terrassa
Posts: 981
| Re: servo issue
90$ servo and you cant service them ?? Awesome ! |
10-11-2020, 12:38 PM | #5 |
Quarry Creeper Join Date: Jun 2019 Location: Sunshine Coast, BC, Canada
Posts: 246
| Re: servo issue
Totally! But let's see what spektrum says about this...It's a really good servo, so I hope something good will happen! Last edited by STHA; 10-11-2020 at 12:42 PM. |
10-11-2020, 07:52 PM | #6 |
I wanna be Dave Join Date: Feb 2017 Location: My mothers basement
Posts: 2,128
| Re: servo issue
I like those pictures. I'll pass on the servo though. __________________________ Handy gearing spreadsheet |
10-12-2020, 09:29 AM | #7 |
Quarry Creeper Join Date: Jun 2019 Location: Sunshine Coast, BC, Canada
Posts: 246
| Re: servo issue I like your 3d printed crawler, impressive!!! |
10-13-2020, 06:46 AM | #8 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: servo issue
The color of that gear doesn't make me think of steel. It's also curious why its companion gear is only half of its height?
|
10-18-2020, 08:54 AM | #9 |
Quarry Creeper Join Date: Jun 2019 Location: Sunshine Coast, BC, Canada
Posts: 246
| Re: servo issue
Update: Spektrum answered my email, I need to send them the servo for inspection. This is what I'll do then... |
10-22-2020, 09:59 AM | #10 |
Quarry Creeper Join Date: Jun 2019 Location: Sunshine Coast, BC, Canada
Posts: 246
| Re: servo issue
last update: I'll keep this broken servo and buy a new one... As shipping + inspection = $$$!!! |
10-29-2020, 08:33 AM | #11 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: servo issue
Thats lame. What will you replace it with? How many hours of use did this last? In what ype of truck? Sucks when expensive electronics die. |
10-29-2020, 09:24 AM | #12 |
Newbie Join Date: Oct 2019 Location: Texas
Posts: 43
| Re: servo issue
That small pinion gear looks like brass. Works fine if the companion gear was plastic. Steel would've lasted longer. Top half of the gear doesn't mesh with the companion gear and still useable ... any way you can pull it off the motor shaft and re-install it upside down?
|
10-30-2020, 07:57 AM | #13 |
Quarry Creeper Join Date: Jun 2019 Location: Sunshine Coast, BC, Canada
Posts: 246
| Re: servo issue
Absolutely, I tried to pull that small gear. Didn't move at all... Any idea how to remove it properly?! |
10-30-2020, 08:58 AM | #14 |
Rock Crawler Join Date: Mar 2019 Location: Terrassa
Posts: 981
| Re: servo issue |
10-30-2020, 10:02 AM | #15 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: servo issue |
10-30-2020, 12:29 PM | #16 |
Quarry Creeper Join Date: Jun 2019 Location: Sunshine Coast, BC, Canada
Posts: 246
| Re: servo issue
I'll buy a new one... But not this one |
servo issue - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Servo issue? | rockpunisher | Electronics | 4 | 04-10-2016 02:16 PM |
Servo issue | 09 Screw | Axial Wraith | 1 | 03-09-2014 01:21 PM |
Servo issue | Ur2respect | Electronics | 14 | 11-14-2012 04:08 PM |
servo issue | ax10tn | Axial XR10 | 15 | 04-28-2012 07:20 AM |
Servo Issue | Gimp | Electronics | 6 | 10-14-2009 07:27 PM |
| |