RCCrawler Forums

Reflection · 09-22-2009, 10:10 PM

Quote:

Originally Posted by JohnRobHolmes

I forgot to mention there is no on/off switch. You plug it in, it is on.

One less thing to worry about.

Thank you sir.

chip cross · 09-22-2009, 10:11 PM

Quote:

Originally Posted by JohnRobHolmes

I forgot to mention there is no on/off switch. You plug it in, it is on. I hate switches, always getting in the way and making extra mess.

Even better.

ROSS · 09-22-2009, 11:06 PM

yes these are sweet...everyone will be very happy...
i ran the piss out of my emaxx with dual motors on both 4s and 6s and still didnt fry it...came close but no go...
also ran both a 12t and a 19t on 4s in the slash and both motors fried, even tried gearing way down
the trottle control is great.

JohnRobHolmes · 09-23-2009, 06:17 AM

I forgot to add the one year warrany on these guys, added to the first post.

CreepyCrawl · 09-23-2009, 07:00 AM

No power switch...one year warranty...this just keeps getting better and better

crcoppens · 09-23-2009, 09:59 AM

Any chance you will be coming out with some BIG emaxx motors to really test this thing out with?

JohnRobHolmes · 09-23-2009, 02:02 PM

nahh, no big brushed motors for me. Kershaw designs has that stuff though.

dub599 · 09-24-2009, 11:36 AM

any idea when these will start shipping out?

EeePee · 09-24-2009, 11:47 AM

Quote:

Originally Posted by dub599

any idea when these will start shipping out?

I got mine today.

dub599 · 09-24-2009, 12:28 PM

Quote:

Originally Posted by EeePee

I got mine today.

thats great news. thanks

Arct1k · 09-24-2009, 07:00 PM

Congratulations jrh! This ones been in the works for a while!

chip cross · 09-25-2009, 09:31 AM

Got my controllers today, thanks John for all the work you have put into these. I am going to see how the M.O.A Losi likes 4s with some of your 35 turn motors and these new speed controls. With out a CCBEC or ON/ OFF switch it is going to clean up the trucks wiring a lot which is a big plus.

microgoat · 09-25-2009, 12:43 PM

Just did the first test run. Holy crap this thing is smoother on the bottom than a stripper

Running an old Integy 35t on 6 NiMH (yeah I know, not pushing it too much am I?) and it's as smooth as a sensored BL. Drag brake kicks ass, too.

The only thing I'm concerned about is those little weeny receiver wires. Are you sure they won't essplode under a 5A draw?

JohnRobHolmes · 09-25-2009, 01:29 PM

They could warm up, yes. The RX plug itself is a huge limit.

Flyin Hawaiian · 09-25-2009, 02:09 PM

Got a pair coming for my New berg build. Thanks man.

EeePee · 09-25-2009, 02:20 PM

Quote:

Originally Posted by microgoat

Holy crap this thing is smoother on the bottom than a stripper

Is that actually smooth?

Let me reread that.

Quote:

Originally Posted by microgoat

smoother on the bottom than a stripper

I dunno man, not too sure about that one.

I'll have to try it for myself, then go get some strippers and blow and see where you're coming from.

Flyin Hawaiian · 09-25-2009, 11:50 PM

Hows the drag brake? Is it stronger?

XSRCdesign · 09-26-2009, 03:10 PM

Quote:

Originally Posted by EeePee

Is that actually smooth?

Let me reread that.

I dunno man, not too sure about that one.

I'll have to try it for myself, then go get some strippers and blow and see where you're coming from.

you have to consider the last stripper Stu probably saw was in 1979

I have a 4s batt on the way, rockracer rig here I come

ecoli · 09-26-2009, 04:03 PM

Any idea on when a decision will be made as to whether you'll be offering these in a waterproof version for an additional fee?

j33pownr · 09-26-2009, 04:06 PM

I just smoked my fxr and I love the drag break on the fxr. So if your drag break is compairable or better to a fxr then I will probably get one when I save up some cash.

09-25-2009, 09:31 AM	#32
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	Got my controllers today, thanks John for all the work you have put into these. I am going to see how the M.O.A Losi likes 4s with some of your 35 turn motors and these new speed controls. With out a CCBEC or ON/ OFF switch it is going to clean up the trucks wiring a lot which is a big plus. Last edited by chip cross; 09-25-2009 at 09:34 AM.

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/holmes-hobbies/200916-torquemaster-br-xl-big-brushed-power.html
Posted By	For	Type	Date
HH TorqueMaster BR-XL new bad boy esc!	This thread	Refback	10-04-2011 03:37 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-22-2009, 11:06 PM	#23
ROSS Rock Crawler Join Date: Feb 2007 Location: CoMo...Kickin it with Holmes Hobbies Posts: 805	yes these are sweet...everyone will be very happy... i ran the piss out of my emaxx with dual motors on both 4s and 6s and still didnt fry it...came close but no go... also ran both a 12t and a 19t on 4s in the slash and both motors fried, even tried gearing way down the trottle control is great.

09-23-2009, 06:17 AM	#24
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,284	I forgot to add the one year warrany on these guys, added to the first post.

09-23-2009, 07:00 AM	#25
CreepyCrawl I wanna be Dave Join Date: Oct 2006 Location: Centered Posts: 2,082	No power switch...one year warranty...this just keeps getting better and better

09-23-2009, 09:59 AM	#26
crcoppens Rock Crawler Join Date: Jul 2006 Location: Northeast Posts: 734	Any chance you will be coming out with some BIG emaxx motors to really test this thing out with?

09-23-2009, 02:02 PM	#27
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,284	nahh, no big brushed motors for me. Kershaw designs has that stuff though.

09-24-2009, 11:36 AM	#28
dub599 Quarry Creeper Join Date: Jan 2008 Location: pittsburg Posts: 284	any idea when these will start shipping out?

09-24-2009, 07:00 PM	#31
Arct1k Quarry Creeper Join Date: Oct 2008 Location: In the basement... Posts: 473	Congratulations jrh! This ones been in the works for a while!

09-25-2009, 12:43 PM	#33
microgoat I wanna be Dave Join Date: Feb 2005 Location: Cleveland, OH Posts: 8,008	Just did the first test run. Holy crap this thing is smoother on the bottom than a stripper Running an old Integy 35t on 6 NiMH (yeah I know, not pushing it too much am I?) and it's as smooth as a sensored BL. Drag brake kicks ass, too. The only thing I'm concerned about is those little weeny receiver wires. Are you sure they won't essplode under a 5A draw?

09-25-2009, 01:29 PM	#34
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,284	They could warm up, yes. The RX plug itself is a huge limit.

09-25-2009, 02:09 PM	#35
Flyin Hawaiian RCC Addict Join Date: Dec 2005 Location: Tucson Posts: 1,190	Got a pair coming for my New berg build. Thanks man.

Sponsored Links

09-25-2009, 11:50 PM	#37
Flyin Hawaiian RCC Addict Join Date: Dec 2005 Location: Tucson Posts: 1,190	Hows the drag brake? Is it stronger?

09-26-2009, 04:03 PM	#39
ecoli I wanna be Dave Join Date: Jun 2007 Location: Canada, eh. Posts: 2,919	Any idea on when a decision will be made as to whether you'll be offering these in a waterproof version for an additional fee?

09-26-2009, 04:06 PM	#40
j33pownr Quarry Creeper Join Date: May 2008 Location: ncrccrawlers.com Posts: 216	I just smoked my fxr and I love the drag break on the fxr. So if your drag break is compairable or better to a fxr then I will probably get one when I save up some cash.

RCCrawler Forums

Thread: TorqueMaster BR-XL Big Brushed Power!