RCCrawler Forums

Die-Laughing · 08-12-2012, 04:32 PM

Fun Fun Fun..

The SC10 did awesome.. I plan to compete with it on Friday.

gottwins? · 08-12-2012, 05:11 PM

That was a blast! I can't wait to go again.

johnnyh66 · 08-12-2012, 05:16 PM

Well, I finished destroying this body.... The inlaws 12 year neighbour built a ramp.

Also, something in the drivtrain is slipping bad.

johnnyh66 · 08-12-2012, 07:50 PM

Quote:

Originally Posted by gottwins?

That was a blast! I can't wait to go again.

I think you have the fastest lap times... that truck handles damn good. What is it, AE?

gottwins? · 08-12-2012, 08:20 PM

Thanks, I'm really rusty though. I had some good runs. I was much better on the dirt track. That carpet so much traction. Yes it's AE sc10 4x4. Project for the next two week is to rebuild diffs and shocks.

badhoopty · 08-13-2012, 08:15 AM

did you guys get the lap timers working this time?

thzero · 08-13-2012, 08:21 AM

Quote:

Originally Posted by badhoopty

did you guys get the lap timers working this time?

Nope. Anyone know what transponder type to get? Robert?

gottwins? · 08-13-2012, 08:35 AM

Amb

badhoopty · 08-13-2012, 09:25 AM

i'm definitely going to lith this upcoming sunday...

scour ebay for used transponders. i picked up one a few years back for 40 bucks.

definite must have if you dont want to be rushed before and after your heat throwing in a house transponder.

thzero · 08-13-2012, 09:29 AM

Quote:

Originally Posted by badhoopty

i'm definitely going to lith this upcoming sunday...

scour ebay for used transponders. i picked up one a few years back for 40 bucks.

definite must have if you dont want to be rushed before and after your heat throwing in a house transponder.

Yeah thats what I was planning to do.. see if I could find something on ebay.

Btw, think Rick (and maybe) Trey are going up Friday. Rick is going to race his SC10 in the 17.5 stock class, and Trey mentioned he was going to try the 4wd class (probably open?).

JHTreyIII · 08-13-2012, 09:56 AM

I might...if my rig isn't in pieces. It should be ready to run Sunday but I may be a spectator Friday. I bit the bullet and ordered the Team RCE low center of gravity chassis. Also ordered some Tekno axles and some SC10 4x4 shocks. My rear MIP X-Duty axles and PL Power Strokes will be for sale soon if anyone is interested in them. I don't like the MIP's because of their weird hex adapter. The power strokes are in good shape they're practically new. One of them is pretty scratched up though because I've had the shoulder screw back out a couple times and drug the shock around the track before I noticed it fell off. Other than the cosmetic damage they work well.

gottwins? · 08-13-2012, 09:59 AM

Those hexes are strange. With that much power, I have no idea why they'd have made a rounded hex. Sunday is a race or practice?

JHTreyIII · 08-13-2012, 10:06 AM

They are strange, I would not suggest them. I'm also going to be switching back to the stock A-Arms for stiffness so if anyone is looking for some RPM arms let me know.

thzero · 08-13-2012, 10:09 AM

Quote:

Originally Posted by JHTreyIII

They are strange, I would not suggest them. I'm also going to be switching back to the stock A-Arms for stiffness so if anyone is looking for some RPM arms let me know.

Hehehe... I thought you were in the RC penalty box?!!?

JHTreyIII · 08-13-2012, 10:36 AM

Haha, I am...kinda. Trying to sell stuff to feed the habit. Like the revo.

thzero · 08-13-2012, 10:40 AM

Quote:

Originally Posted by JHTreyIII

Haha, I am...kinda. Trying to sell stuff to feed the habit. Like the revo.

Anyone want to buy a HPI Sprint 2?

badhoopty · 08-13-2012, 10:43 AM

Quote:

Originally Posted by JHTreyIII

They are strange, I would not suggest them. I'm also going to be switching back to the stock A-Arms for stiffness so if anyone is looking for some RPM arms let me know.

ahh. youre thinking like a racer now. ;)

i ordered the fronts and rears mip axles before i noticed ricks hexes. i'm think the reason mip changed from the pin/hex stub axles to the keyed/hex stub axles is because alot of dudes were complaining about bending/breaking the stubs at the hex.

badhoopty · 08-13-2012, 10:45 AM

Quote:

Originally Posted by thzero

Yeah thats what I was planning to do.. see if I could find something on ebay.

Btw, think Rick (and maybe) Trey are going up Friday. Rick is going to race his SC10 in the 17.5 stock class, and Trey mentioned he was going to try the 4wd class (probably open?).

i would go if it were closer... i really really wish i hadnt got rid of my sc10...

anybody down for going sunday?

BAD 1 · 08-13-2012, 10:52 AM

Quote:

Originally Posted by JHTreyIII

They are strange, I would not suggest them. I'm also going to be switching back to the stock A-Arms for stiffness so if anyone is looking for some RPM arms let me know.

You might want to hold on to your RPM A-arms because of the flex, because the stiff arms tend to brake after hitting a tube or coming off a jump wrong. IMO Rick i will try to make it Friday night and if so i will bring a transponder for you to use or you can PM me.

sally1800 · 08-13-2012, 11:10 AM

Quote:

Originally Posted by JHTreyIII

I might...if my rig isn't in pieces. It should be ready to run Sunday but I may be a spectator Friday. I bit the bullet and ordered the Team RCE low center of gravity chassis. Also ordered some Tekno axles and some SC10 4x4 shocks. My rear MIP X-Duty axles and PL Power Strokes will be for sale soon if anyone is interested in them. I don't like the MIP's because of their weird hex adapter. The power strokes are in good shape they're practically new. One of them is pretty scratched up though because I've had the shoulder screw back out a couple times and drug the shock around the track before I noticed it fell off. Other than the cosmetic damage they work well.

SWEET!!!

Did you order the long or standard?

08-12-2012, 04:32 PM	#7241
Die-Laughing RCC Addict Join Date: May 2010 Location: Midwest Posts: 1,917	Re: NIRC. Chit Chat Fun Fun Fun.. The SC10 did awesome.. I plan to compete with it on Friday.

08-12-2012, 05:16 PM	#7243
johnnyh66 Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island Posts: 5,573	Re: NIRC. Chit Chat Well, I finished destroying this body.... The inlaws 12 year neighbour built a ramp. Also, something in the drivtrain is slipping bad.

08-13-2012, 08:15 AM	#7246
badhoopty Moderator Join Date: Jan 2004 Location: chicago Posts: 2,814	Re: NIRC. Chit Chat did you guys get the lap timers working this time?

08-13-2012, 09:25 AM	#7249
badhoopty Moderator Join Date: Jan 2004 Location: chicago Posts: 2,814	Re: NIRC. Chit Chat i'm definitely going to lith this upcoming sunday... scour ebay for used transponders. i picked up one a few years back for 40 bucks. definite must have if you dont want to be rushed before and after your heat throwing in a house transponder.

08-13-2012, 09:56 AM	#7251
JHTreyIII Rock Crawler Join Date: Nov 2011 Location: Sin City Posts: 820	Re: NIRC. Chit Chat I might...if my rig isn't in pieces. It should be ready to run Sunday but I may be a spectator Friday. I bit the bullet and ordered the Team RCE low center of gravity chassis. Also ordered some Tekno axles and some SC10 4x4 shocks. My rear MIP X-Duty axles and PL Power Strokes will be for sale soon if anyone is interested in them. I don't like the MIP's because of their weird hex adapter. The power strokes are in good shape they're practically new. One of them is pretty scratched up though because I've had the shoulder screw back out a couple times and drug the shock around the track before I noticed it fell off. Other than the cosmetic damage they work well.

08-12-2012, 05:11 PM	#7242
gottwins? Pebble Pounder Join Date: Sep 2011 Location: Joliet Posts: 181	That was a blast! I can't wait to go again.

08-12-2012, 08:20 PM	#7245
gottwins? Pebble Pounder Join Date: Sep 2011 Location: Joliet Posts: 181	Thanks, I'm really rusty though. I had some good runs. I was much better on the dirt track. That carpet so much traction. Yes it's AE sc10 4x4. Project for the next two week is to rebuild diffs and shocks.

08-13-2012, 08:35 AM	#7248
gottwins? Pebble Pounder Join Date: Sep 2011 Location: Joliet Posts: 181	Amb

08-13-2012, 09:59 AM	#7252
gottwins? Pebble Pounder Join Date: Sep 2011 Location: Joliet Posts: 181	Those hexes are strange. With that much power, I have no idea why they'd have made a rounded hex. Sunday is a race or practice?

08-13-2012, 10:06 AM	#7253
JHTreyIII Rock Crawler Join Date: Nov 2011 Location: Sin City Posts: 820	Re: NIRC. Chit Chat They are strange, I would not suggest them. I'm also going to be switching back to the stock A-Arms for stiffness so if anyone is looking for some RPM arms let me know.

08-13-2012, 10:36 AM	#7255
JHTreyIII Rock Crawler Join Date: Nov 2011 Location: Sin City Posts: 820	Re: NIRC. Chit Chat Haha, I am...kinda. Trying to sell stuff to feed the habit. Like the revo.

Sponsored Links

RCCrawler Forums

Thread: NIRC. Chit Chat