Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Kyosho Crawlers
Loading

Notices

Thread: *** Twin Force Upgrades ***

Reply
 
LinkBack Thread Tools Display Modes
Old 08-09-2020, 04:37 PM   #301
Newbie
 
Join Date: Apr 2013
Location: Mantua
Posts: 6
Default Re: *** Twin Force Upgrades ***

Hey guys, I have a Mad Force Kruiser VE that I bought new a long time ago. I've been running it off and on thru the years modifying it here and there. I recently fell in love with the truck again and I stripped out the rear diff ring gear. I had the helical cut gears in there and I can't seem to find them anywhere now. Anyone have any idea if they can still be found somewhere? Really the only mods I've done is the Thundertech racing steering eliminator kit, and I changed how the rear shock mount is braced cuz it was bending. I'm thinking about getting the Hot Racing ladder bars and possibly the Hot Racing aluminum axle housings if I can find them. I'm also looking for rear center shaft ideas. I have the MIP front center but I can't get the rear anymore. I'm thinking of using revo shafts but I'm not sure which shafts to get. I love this truck and I hope I can keep it going. Thanks guys!
deviltrigger529 is offline   Reply With Quote
Sponsored Links
Old 08-09-2020, 07:54 PM   #302
RCC Addict
 
Join Date: Jun 2006
Location: Here
Posts: 1,829
Default Re: *** Twin Force Upgrades ***

Hi. Ebay would be your best bet for the ring and pinion. Inferno diffs were the same i think. Revo shafts, you would probably need two, then make them fit the 8mm shaft.
Gula is online now   Reply With Quote
Old 08-10-2020, 01:00 PM   #303
Newbie
 
Join Date: Apr 2013
Location: Mantua
Posts: 6
Default Re: *** Twin Force Upgrades ***

Quote:
Originally Posted by Gula View Post
Hi. Ebay would be your best bet for the ring and pinion. Inferno diffs were the same i think. Revo shafts, you would probably need two, then make them fit the 8mm shaft.

Ebay is usually the first place I go for parts and I found nothing. I think I checked for the inferno ring and pinion as well from the OP part #s and couldn't find anything. I did happen to come across crash n bash hobbies and they had 1 left so I snagged it. Hopefully I actually get it lol. So for the revo shafts is that just drilling out the hub for the output shaft or do I have to combine 2 to make 1 also?
deviltrigger529 is offline   Reply With Quote
Old 09-10-2020, 07:49 PM   #304
Newbie
 
Join Date: Jun 2011
Location: Australind Western Australia
Posts: 4
Default Re: *** Twin Force Upgrades ***

I am after some harder springs than the stock reds for my custom Mad Crusher based projects.
Can anybody suggest some springs that will fit the stock plastic shocks but are a deal stiffer.
I need to support a very heavy custom body, much heavier than a lightweight lexan shell.
I have moved the shocks to a more vertical position which helps but I need more out of the springs to take up the slack or droop as it were.


Here's an early work in progress pic of the project in question.





Thanks.
mung is offline   Reply With Quote
Reply



LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/kyosho-crawlers/58270-%2A%2A%2A-twin-force-upgrades-%2A%2A%2A.html
Posted By For Type Date
kyosho madforce kruiser ve - Monster Trucks @ URC Forums This thread Refback 02-22-2013 06:29 AM

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 10:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com