RCCrawler Forums

CronusTRD · 09-03-2008, 07:45 AM

I'm running crystals, but I have 5 or so different sets, so I don't think that will be an issue.

CronusTRD · 09-03-2008, 01:51 PM

I've got a slew of new parts on the way, so I'm definitely in now.

speedemall · 09-03-2008, 02:36 PM

sweet !!!! I ordered new inserts hopefully they get here in time

bostonbruins40 · 09-03-2008, 02:37 PM

I have an AX 10 tons of upgrades and a CR01 totally stock and DX3R POst pics later.

MDcrawler08 · 09-03-2008, 03:38 PM

i cant wait for the gtg. i just got back from my local crawl spot, i had to run my truck a little to make sure it will be ready. it held up pretty good except the front driveshaft started spinning on the tranny.

Heavy Metal Doc · 09-04-2008, 06:23 AM

Im spreading the word to get some more people involved

sjohn · 09-04-2008, 08:16 AM

Hey guys, I'm in Maryland also(Germantown). This is actually my first post on this board. I would love to go to the GTG the 14th but sadly I will be out of town. If anyone wants to go out some other time, let me know. Thanks.

MDcrawler08 · 09-04-2008, 10:43 AM

is anyone planning on making a video or anything cuz i think that would be cool to post up after get together

youngblood · 09-04-2008, 04:32 PM

Just ordered another "motherload of parts" for my rig

Damn I hope my new junk gets here in time.

MDcrawler08 · 09-04-2008, 04:58 PM

i was thinking bout going to sugarloaf this sunday just to check it out but it looks the wether is gonna be bad:-(

CronusTRD · 09-04-2008, 05:27 PM

Saturday is the shitty day. Sunday is 81* and clear. I have season tickets to the ravens so it's going to be a perfect day

broncoholic · 09-04-2008, 06:15 PM

Quote:

Originally Posted by youngblood

Just ordered another "motherload of parts" for my rig

Damn I hope my new junk gets here in time.

What all did you order?

CronusTRD · 09-04-2008, 06:40 PM

I'm waiting on a CDW chassis, axle Cs, upgraded TLT shafts, servo top plates, a new saddle pack, and rear lockouts. This should bring me back to 2.2 spec.

I plan to add an axial trans with dig after the 14th.

broncoholic · 09-04-2008, 06:43 PM

How can I keep my drive shafts from poping apart at the joints on my scorpion? also I am looking for some 40 seires foams for my moab XL's

youngblood · 09-04-2008, 06:48 PM

Quote:

Originally Posted by broncoholic

What all did you order?

Some beefcake for my Axial. Straight axle kit, cvd's, HD lockers.

I also just picked up some new rubber for my super, (Moab xl's

) so I hope to bring it too, if they get here in time.

I will also have my 4WS SSMT tuber along for the ride.

MDcrawler08 · 09-04-2008, 08:06 PM

the ssmt sounds cool. i havent seen one in person yet.

Heavy Metal Doc · 09-05-2008, 05:12 AM

Quote:

Originally Posted by broncoholic

How can I keep my drive shafts from poping apart at the joints on my scorpion?

You can get rings that reinforce the yoke so that it wont spread apart....You cant see them very well on this link, but you'll get the idea......http://www.ckrccrawlers.com/shop/ind...aaebb679f6e4ac

speedemall · 09-05-2008, 07:19 AM

Quote:

Originally Posted by CronusTRD

Saturday is the shitty day. Sunday is 81* and clear. I have season tickets to the ravens so it's going to be a perfect day

My fiancee got tickets for that game too,I doubt we'll go though

champ7times · 09-05-2008, 07:20 AM

i am a noobie i have a high lift mostly stock has 55 turn motor ,novak rooster esc. locked diffs running a hpi controler 4 now. only have one battery .but would still like to meet and hang out. i have free time on weekends. and would like to meet up at sugarloaf. now i herd of it bit never been there.any directions on how to get there? i guess my high lift would fall into the 1.9 class is that right?

CronusTRD · 09-05-2008, 11:13 AM

Do they allow dogs at Sugarloaf?

My wife might come and if she does, the dog will probably be in tow.

09-04-2008, 04:32 PM	#49
youngblood RCC Addict Join Date: Jun 2006 Location: Maryland Posts: 1,255	Just ordered another "motherload of parts" for my rig Damn I hope my new junk gets here in time. Last edited by youngblood; 09-04-2008 at 04:41 PM.

09-04-2008, 06:43 PM	#54
broncoholic Quarry Creeper Join Date: Jan 2006 Location: hagerstown Posts: 424	How can I keep my drive shafts from poping apart at the joints on my scorpion? also I am looking for some 40 seires foams for my moab XL's Last edited by broncoholic; 09-04-2008 at 06:48 PM.

09-03-2008, 07:45 AM	#41
CronusTRD Quarry Creeper Join Date: Oct 2005 Location: MD Posts: 323	I'm running crystals, but I have 5 or so different sets, so I don't think that will be an issue.

09-03-2008, 01:51 PM	#42
CronusTRD Quarry Creeper Join Date: Oct 2005 Location: MD Posts: 323	I've got a slew of new parts on the way, so I'm definitely in now.

09-03-2008, 02:36 PM	#43
speedemall Pebble Pounder Join Date: Aug 2008 Location: frederock,maryland Posts: 117	sweet !!!! I ordered new inserts hopefully they get here in time

09-03-2008, 02:37 PM	#44
bostonbruins40 Newbie Join Date: Jul 2008 Location: Millersville Posts: 12	I have an AX 10 tons of upgrades and a CR01 totally stock and DX3R POst pics later.

09-03-2008, 03:38 PM	#45
MDcrawler08 Newbie Join Date: Sep 2007 Location: westminster Maryland Posts: 31	i cant wait for the gtg. i just got back from my local crawl spot, i had to run my truck a little to make sure it will be ready. it held up pretty good except the front driveshaft started spinning on the tranny.

09-04-2008, 06:23 AM	#46
Heavy Metal Doc Newbie Join Date: Feb 2008 Location: Keymar Posts: 41	Im spreading the word to get some more people involved

09-04-2008, 08:16 AM	#47
sjohn Newbie Join Date: Aug 2007 Location: MD Posts: 0	Hey guys, I'm in Maryland also(Germantown). This is actually my first post on this board. I would love to go to the GTG the 14th but sadly I will be out of town. If anyone wants to go out some other time, let me know. Thanks.

09-04-2008, 10:43 AM	#48
MDcrawler08 Newbie Join Date: Sep 2007 Location: westminster Maryland Posts: 31	is anyone planning on making a video or anything cuz i think that would be cool to post up after get together

09-04-2008, 04:58 PM	#50
MDcrawler08 Newbie Join Date: Sep 2007 Location: westminster Maryland Posts: 31	i was thinking bout going to sugarloaf this sunday just to check it out but it looks the wether is gonna be bad:-(

09-04-2008, 05:27 PM	#51
CronusTRD Quarry Creeper Join Date: Oct 2005 Location: MD Posts: 323	Saturday is the shitty day. Sunday is 81* and clear. I have season tickets to the ravens so it's going to be a perfect day

Sponsored Links

09-04-2008, 06:40 PM	#53
CronusTRD Quarry Creeper Join Date: Oct 2005 Location: MD Posts: 323	I'm waiting on a CDW chassis, axle Cs, upgraded TLT shafts, servo top plates, a new saddle pack, and rear lockouts. This should bring me back to 2.2 spec. I plan to add an axial trans with dig after the 14th.

09-04-2008, 08:06 PM	#56
MDcrawler08 Newbie Join Date: Sep 2007 Location: westminster Maryland Posts: 31	the ssmt sounds cool. i havent seen one in person yet.

09-05-2008, 07:20 AM	#59
champ7times Pebble Pounder Join Date: Sep 2008 Location: middle river Posts: 171	i am a noobie i have a high lift mostly stock has 55 turn motor ,novak rooster esc. locked diffs running a hpi controler 4 now. only have one battery .but would still like to meet and hang out. i have free time on weekends. and would like to meet up at sugarloaf. now i herd of it bit never been there.any directions on how to get there? i guess my high lift would fall into the 1.9 class is that right?

09-05-2008, 11:13 AM	#60
CronusTRD Quarry Creeper Join Date: Oct 2005 Location: MD Posts: 323	Do they allow dogs at Sugarloaf? My wife might come and if she does, the dog will probably be in tow.

RCCrawler Forums

Thread: Let's plan a comp