| |
03-14-2007, 08:08 PM
| #21 |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| 
They are the same width as my Alum Knuckles which I believe they were the same. I had Fat-Rock C's on so it was a simple change out. They are not going to budge....  |
|  |
| Sponsored Links | |
| | |
|
03-14-2007, 08:10 PM
| #22 |
| Quarry Creeper Join Date: Feb 2005 Location: Wheeling
Posts: 279
|
Well then i guess it's time to order a set or 4.   |
|
| |
|
03-14-2007, 08:30 PM
| #23 |
| Newbie Join Date: Aug 2006 Location: everson
Posts: 39
| video
moved to other march 11th gtg thread
Last edited by hazzzy; 03-15-2007 at 11:24 AM. |
|
| |
|
03-16-2007, 09:31 AM
| #24 |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
|
I just posted on our "other" forum (AB-C) something that may be of interest to some of you. Go check it out. It is a first come, first serve... |
|
| |
|
03-17-2007, 03:36 PM
| #25 | |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Quote:
John | |
|
| |
|
03-19-2007, 01:07 PM
| #26 |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
|
What do you guys think of this??? I can have them made 1/10th scale size for our rigs. Unless someone in the club can make them.  John |
|
| |
|
03-19-2007, 01:07 PM
| #27 | |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Quote:
| |
|
| |
|
03-19-2007, 05:30 PM
| #28 |
| Pebble Pounder Join Date: Sep 2006 Location: clune
Posts: 141
|
So gtg is going to be a same spot as last time.Are we going to meet a coles shop? Since i wasn't at last one
|
|
| |
|
03-19-2007, 05:33 PM
| #29 | |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Quote:
I have a feeling that is where it will be again. Unless someone comes up with something else. We will keep our options open for now. This time next week will be the drop dead cutoff.  | |
|
| |
|
03-19-2007, 05:39 PM
| #30 |
| Pebble Pounder Join Date: Sep 2006 Location: clune
Posts: 141
|
Any word on pleasent valley rc building a crawling course?
|
|
| |
|
03-19-2007, 05:41 PM
| #31 | |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Quote:
| |
|
| |
|
03-20-2007, 05:28 AM
| #32 |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Roster Info
If you have not given me this info yet. Please email it to me: Name RCC Name Address City, ST Zip Cell # Emergency # Email Address Rigs: Scaler 2.2 Comp Super Unlimited Other Thanks, John |
|
| |
|
03-20-2007, 05:32 AM
| #33 |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| W.Pa.C. Official Classes
It seems that after recapping the roster information that I have, we are in the following classes: Scaler 2.2 Comp Super These will be the three classes that we will focus on. If you are planning to build a rig, try to stay within these perimeters. Any questions on the criteria, reference the USRCRCA rules in the Competition Forum. Tubers will be lumped into Scaler as long as they meet the new 2007 Tuber Amendments. Any questions please feel free to contact me. |
|
| |
|
03-20-2007, 09:00 AM
| #34 | |
| RCC Addict Join Date: Sep 2005 Location: Behind the torch!
Posts: 1,360
| Classes Quote:
 What about comp tubers that were built for the 2.2 class I'll run my tuber w/ the scalers don't matter to me, but I just think that a Coles tuber can outcrawl any scaler?! I guess we'll see. Let's crawl | |
|
| |
|
03-20-2007, 10:45 AM
| #35 | |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Quote:
Thanks for the feedback, John | |
|
| |
|
03-20-2007, 04:01 PM
| #36 |
| Newbie Join Date: Oct 2006 Location: smithton
Posts: 35
|
if its in scale class does it have to run 1.9 tires or can it be on 2.2 tires also....?
|
|
| |
|
03-20-2007, 04:07 PM
| #37 |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
|
Based on 2007 Rules Committee... TUBER RULES : -2.2 class tube chassis are allowed with the following restrictions. Chassis must be at least 8"long, 3"wide, and 3.75"tall, the roof must be raised from the main chassis to resemble a cockpit, and it must have solid hood, roof and sidepanels. -Supercrawler class tube chassis are allowed with the following restrictions. Chassis must be at least 12"long, 3"wide, and 3.75"tall, the roof must be raised from the main chassis to resemble a cockpit, and it must have solid hood, roof and sidepanels. They will be considered 2.2 Comp as long as they are within these restrictions. Possibly we can run a Scaler Class that must run 1.9 tires???? Topic for discussion on 4/1... |
|
| |
|
03-20-2007, 04:47 PM
| #38 |
| Pebble Pounder Join Date: Sep 2006 Location: clune
Posts: 141
|
I would say the tubers would run in 2.2 comp.As long as the fit the rules
|
|
| |
|
03-20-2007, 05:06 PM
| #39 |
| RCC Addict Join Date: Mar 2006 Location: MUSE, PA
Posts: 1,273
|
yeah, i agree, tubers should be in the 2.2 comp class. that is what i am designing and building my tuber this weekend to run in.
|
|
| |
|
03-20-2007, 05:07 PM
| #40 |
| Pebble Pounder Join Date: Sep 2006 Location: clune
Posts: 141
|
I have no problem with them running in comp class.I ran alot of tubers before and their about a even match i'd say
|
|
| |
 |
| |
Linear Mode
