RCCrawler Forums - Wreckluse Feedback, Support & FAQ

Page 9 of 14

Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)

- RCP Crawlers (http://www.rccrawler.com/forum/rcp-crawlers/)

- - Wreckluse Feedback, Support & FAQ (http://www.rccrawler.com/forum/rcp-crawlers/140045-wreckluse-feedback-support-faq.html)

ZoSo	03-31-2011 04:18 PM

HPI makes hundreds of bodies at a time and sell's them for 28.00.
....not a bad deal
I'll check to see the cost to run a hundred or so.
Is anyone interested in a carbon-fiber Wreckluse hood?

Quote:

Originally Posted by TrailDawg362 (Post 3018558)

Not to beat a dead horse, but I've been asking the same question for awhile now. Yes, I know I could buy a body for about $28 and hack it up for a hood (and throw away the rest?). And yes I know I could cut my own panels (but not as neatly). Would it really be that big of a deal to sell the replacements? I'm not trying to be a jerk, but I just can't understand why it's so hard to offer them for sale. I love my Wreckluse, but it's getting pretty beat up and needs some new skins.

MNROKCRAWLR

03-31-2011 04:53 PM

I'd be down for a few body panels sets

I'l also love the trans mount with in-board links

Carbon fiber hood, not so much....but that's just me.

Thanks for responding so quickly...you guys have THE best service! "thumbsup"

TrailDawg362

03-31-2011 05:26 PM

Hood and panels, YES!

Skidplate w/inboarded link option, YES!

CF hood? I'd love to see some pics.

jca2184

04-03-2011 06:40 PM

What size shocks do you guys suggest to use with this chassis and 2.2 wheels and tires?

3jeeps

04-04-2011 07:06 AM

I'd like to see panels and the inboarded skid. On the hood maybe. If you could design it 3 piece grill,hood, and cowl.

MNROKCRAWLR

04-04-2011 08:51 PM

Quote:

Originally Posted by jca2184 (Post 3023642)

What size shocks do you guys suggest to use with this chassis and 2.2 wheels and tires?

I used the RC4WD 110mm ones. About perfect for 2.2 tires.

TrailDawg362

04-13-2011 04:30 PM

Are there any reccomendations for wheel wideners for the Wreckluse chassis with Axial axles? Brand and size? I'd like to run taller tires without chassis rub. Thanks in advance :mrgreen:.

ZoSo	04-18-2011 04:40 PM

Quote:

Originally Posted by TrailDawg362 (Post 3041758)

Are there any reccomendations for wheel wideners for the Wreckluse chassis with Axial axles? Brand and size? I'd like to run taller tires without chassis rub. Thanks in advance :mrgreen:.

I'm thinking wraith axle and tranny hehehe
but g-made makes a nice set of wideners
http://gmade.net/dealer/index.php?ma...roducts_id=282

TrailDawg362

04-19-2011 11:24 PM

Thanks bud! I appreciate your help :mrgreen:.

jca2184

05-12-2011 04:54 AM

Quote:

Originally Posted by TrailDawg362 (Post 3041758)

Are there any reccomendations for wheel wideners for the Wreckluse chassis with Axial axles? Brand and size? I'd like to run taller tires without chassis rub. Thanks in advance :mrgreen:.

I use a set of integy 15mm wideners but they really hinder you on pointy rocks or narrow paths im actually about to remove mine but as far as stability goes they do help out

xirtic

05-12-2011 05:43 PM

I tossed a pair of the Hot Racing ones on my Wreckluse. They come in 15mm...but can add 5mm or 10mm if needed. I see no need to go over 15mm. With these on the truck I can really push the articulation and just barely rub.

3jeeps

06-03-2011 08:52 AM

Did you get any wreckluse skids made, just checking back and I'm still interested. Thanks

Quote:

Originally Posted by ZoSo (Post 2981094)

I'm in the process of make a new comp chassis and skid plate
so yes... I'll add the Wreckluse inboard skidplate to the order
I'll try and get them on the site in a couple of weeks.

TrailDawg362

06-03-2011 11:35 AM

Quote:

Originally Posted by 3jeeps (Post 3124411)

Did you get any wreckluse skids made, just checking back and I'm still interested. Thanks

Same here, any word yet?

norcallump

06-04-2011 01:16 PM

got ahead of myself and whacked up my skid plate for my wrecluse.. who do I contact , how much for a new one. need blank as Im using losi axles and tranny. something inboraded would be cool too!

ZoSo	06-06-2011 04:27 PM

Skid Plates for sale

Wreckluse Stock Skids are for sale:

http://rcpcrawlers.com/product.php?p...3&cat=6&page=1

Onebdgti

06-08-2011 09:10 AM

I just got one of these chassis used and was wondering what shocks people are using for 2.2 and what type of widners

ZoSo	06-08-2011 06:53 PM

Quote:

Originally Posted by Onebdgti (Post 3131763)

I just got one of these chassis used and was wondering what shocks people are using for 2.2 and what type of widners

here's a nice build thread
looks like rc4wd shocks
but you can use ax10 or scx10 shocks

http://www.rccrawler.com/forum/2-2-scale-rigs/261996-my-2-2-ttc-wreckluse-build.html

3jeeps

06-09-2011 03:03 PM

Freaky Fast Service!! Ordered my replacement skid on 6/7 before you got to work and it was in the mailbox on 6/9. Thanks "thumbsup"

xiteamxi

08-27-2011 12:44 AM

curious about the replacement policy does it matter if some thing was changed (braces in the windshield area ect..)and does it cover if the nuts that mount the body panels snap off?

ZoSo	08-27-2011 08:51 AM

Quote:

Originally Posted by xiteamxi (Post 3250546)

curious about the replacement policy does it matter if some thing was changed (braces in the windshield area ect..)and does it cover if the nuts that mount the body panels snap off?

PM Sent

All times are GMT -6. The time now is 05:02 PM.

Page 9 of 14

« First

Show 40 post(s) from this thread on one page