RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   RCP Crawlers (http://www.rccrawler.com/forum/rcp-crawlers/)
-   -   Wreckluse Feedback, Support & FAQ (http://www.rccrawler.com/forum/rcp-crawlers/140045-wreckluse-feedback-support-faq.html)

bentrocker 01-08-2010 05:50 AM

I was wondering if you can use the axial front axle with the servo moved to the side and batt on the front axle? Will there be enough room for articulation or will it hit the chassis when flexing?

Turn'Nburn 01-08-2010 09:00 AM

with the suspension fully compressed the servo sits between two frame rails. if you move the servo to the side and mount the batt next to it, they will probably interfere with the chassis as the suspension articulates.

nockturnal 01-11-2010 07:39 AM

My wreckluse will be here 1/12/10 cant wait to build it . Im using LNC axles and trans for my build.

upd103 02-24-2010 07:45 PM


Originally Posted by pigeonfarmboy (Post 1384167)
Q: What length links do I use for my Wreckluse?
A: Depends if you're using 1.9 or 2.2 Tires/Wheels. Keep in mind there is no "Wrong" or "Right" length since it's subjective. Here's what we've found to be the best using our Universal Servo/Link Mounts: (Lengths are the measurement of the link itself not eye-to-eye of the rod ends)

Front Upper - 55mm
Front Lower - 70mm
Rear Upper - 70mm
Rear Lower - 70mm

OK. I made my own links, and matched your dimensions posted here. They came out pretty good for home made links, but I'm curious about your "Universal Servo / Link Mounts."

Does it keep the 3 Link set up in the front which accounts for the 15 mm shorter link up top in the front?

I used the four link adapters that came with my SCX 10 in the rear, and the stock 3 Link set up in the front. I have only minor rubbing (about 1 to 2 mm) of my servo horn on the frame during full compression. We all know that you seldom experience a true full compression though, so it's not an issue.

Do you have any pics of your universal mounts and the upper links front and rear? I'm interesting in going with Axial made links and your universal plates if I like them.

Swamp Duck 06-08-2010 05:05 PM

could i run crawler king axles??

tzenev 06-11-2010 05:46 PM

so if i have the ax-10 rtc kit i could get the wreckluse chassis and all my stuff would bolt on and it would be ready to go?

fastfred28 06-20-2010 05:15 AM


Originally Posted by tzenev (Post 2497902)
so if i have the ax-10 rtc kit i could get the wreckluse chassis and all my stuff would bolt on and it would be ready to go?

You should be able to use everything exceot for your links those come with the plastic links.The links will be way to long,and the links are pretty weak to begin with.I would upgrade and buy the axial metal links and ball ends.

TrailDawg362 06-23-2010 10:32 PM

8-32 all-thread with Jato rod ends sleeved with tubing works great also "thumbsup".

It's a heavy chassis so the extra strength of the above setup helps make it almost bullet proof.

kmoore 06-25-2010 10:48 PM

i just got 1 of these in a trade. only thing it didn't come with a skid plate. can i order 1 separate?

rockrigcustoms 06-27-2010 12:25 PM

ive got two of these things now. both brushless with frame mounted steering servos, axial drivetrain and 2.2 tires. very capable rigs if stretched abit and with big offset rims they r pretty stable. i run gmade wheel wideners and these things r mean looking. will try and post pics as soon as i figure out how. and they are super durable!!!!!!!!!!"thumbsup" trying to get my hands on a third for a 4door version.

irok 07-24-2010 05:20 AM

when will these be in stock again?
and at what price?,,,the site says $199 is "limited"

Agama 08-01-2010 07:34 PM

X2 on when back in stock?? I would like to order one. Thanks

TrailDawg362 08-02-2010 04:39 PM

Any chance I can get some new body panels? Mine are getting really beat up! Price and order info would be great!

wurster 08-14-2010 11:52 AM

buy far the worst trany i have owned.The r2 is loud and striped be for my stock ax 10.ax 10 is the way to go 4.50 for the geer set and you are back on your way

NorZepol 08-15-2010 03:37 AM

Info on that stock date would be great. I got on the website contact and requested a reply last week. Just hoping they restock soon. Finished the axial based crawler,now I want in on the scale side. Any info would be great. Thanks.

rcfreak363 08-16-2010 07:25 PM

could i use a set of wheely king axles on this chassis?

honchoscaler 09-14-2010 04:26 PM

when will these be back in stock??

jtice 09-14-2010 07:32 PM

PM sent honchoscaler, I have one for sale right now.


RockGarden 09-15-2010 08:19 AM

Would lolve to get my hands on one... Would anyone be interested in Traded for a axial scx10 rtr for the kit??? only been ran 3 times...

wiseman 10-02-2010 07:56 AM

rcp crawlers
IV bin trying to buy a wreckluse chassis but they. Wont email me back or answer the phone how do I get a hold of them

All times are GMT -6. The time now is 04:58 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com