OverkillRC's: The Phoenix

[losikid]

I was hoping to have parts by now, but i guess afew tools needed to be ordered before a certain section could be machined.

So i don't know how far out, i should have a skid to approve in the next few days, and hopefully i'll have all the parts in two weeks

[losikid]

Finally, got word that all the new parts are on their way to me...so ya'll will get new goodies sent your way next week.

I believe

1x skid
1x shark fin
+ i'm adding more
4x 1/4" ultra light topper spacers
1x insert assemble bolt
----it is a .375" 4-40 bolt with a nut on it. The allows you to get the insert flush, and if the bolt gets too tight with the insert that the insert wants to back out with the bolt, you grab onto the nut and it'll keep the insert in place while you unscrew the bolt. In losi plastic its not really an issue. But with delrin and some aluminum ive tried inserts with, the nut is real helpful.
and the new fins down have c-cunk holes, so i'm including 4 1/2" button heads

If i've made any other promises, lmk, but this is all i can think of.

I'm also considering doing a 1/16" thick topper. if anyone is interested and has already bought a chassis, i'll sell them to you at cost...i still have two chassis left. After their sold, i'm not selling anymore for awhile. I want to get some feedback and wait to see if there's interest for another small batch. Alum hardware kits can be sold separately too if you want them.

[Shawn M]

You now have one chassis left.

[losikid]

Originally Posted by Shawn M

You now have one chassis left.

Cool....yours will be shipping next week

[DoctorRC]

Wooohooo. Looking forward to getting mine

[Frikenwoodro]

Originally Posted by losikid

Finally, got word that all the new parts are on their way to me...so ya'll will get new goodies sent your way next week.

I believe

1x skid
1x shark fin
+ i'm adding more
4x 1/4" ultra light topper spacers
1x insert assemble bolt
----it is a .375" 4-40 bolt with a nut on it. The allows you to get the insert flush, and if the bolt gets too tight with the insert that the insert wants to back out with the bolt, you grab onto the nut and it'll keep the insert in place while you unscrew the bolt. In losi plastic its not really an issue. But with delrin and some aluminum ive tried inserts with, the nut is real helpful.
and the new fins down have c-cunk holes, so i'm including 4 1/2" button heads

If i've made any other promises, lmk, but this is all i can think of.

I'm also considering doing a 1/16" thick topper. if anyone is interested and has already bought a chassis, i'll sell them to you at cost...i still have two chassis left. After their sold, i'm not selling anymore for awhile. I want to get some feedback and wait to see if there's interest for another small batch. Alum hardware kits can be sold separately too if you want them.

A free chassis for me.....

Pm in coming

[losikid]

Everything will be shipping by monday...

[Fish11]

Cool thanks for the info


Fish phone

[losikid]

These will be shipping tomorrow, i never had a chance to stop at the po today. If anyone wants their DC number for their updated parts, send me an email (losikid@overkillrc.com) with your order number

[DoctorRC]

So, I got my kit put together yesterday and ran into a small (but large) problem. The wheelbase looked a little long, so I measured my axle to axle distance and we are clocking in at 13.25". I am using the titanium lower link kit from Dlux, which on the regular comp crawler gave me a WB of 12.5" as expected. How can I fix this?

[losikid]

Originally Posted by DoctorRC

So, I got my kit put together yesterday and ran into a small (but large) problem. The wheelbase looked a little long, so I measured my axle to axle distance and we are clocking in at 13.25". I am using the titanium lower link kit from Dlux, which on the regular comp crawler gave me a WB of 12.5" as expected. How can I fix this?

switch to revo ends and get rid of the link sliders/spacers

[Nutternugz]

I just went to your website and saw that the chassis is out of stock, when do you think you will have another chassis available?

[stankulas]

i was wondering as well

[losikid]

Not anytime soon...too much other stuff is on my plate right now.

[pajey]

So I was looking into transforming my lnc and wanted to clarify if I was to do this I would need new drive shafts, any idea on what ones? And some links, also does the chassis come with everything you need besides the tools to build it obviously.

Thanks.

[STi954]

What transmission is everyone running in this chassis? LNC or LCC I'm converting my LNC to the Phoenix and the motor side sticks way out and just doesn't seem correct
Thanks!

[losikid]

Originally Posted by STi954

What transmission is everyone running in this chassis? LNC or LCC I'm converting my LNC to the Phoenix and the motor side sticks way out and just doesn't seem correct
Thanks!

Its supposed to stick out

[STi954]

Ok thanks

[huskerfan406]

Just wondering when you will get this chassis in again!?? I want to build my LCC! Thanks

[losikid]

There's no current eta