Sorry, I could send you some add on rings."thumbsup"
Ernie
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Codyboy Rebuilds His TRX4 "BULLDOG"
- Thread starter CODYBOY
- Start date
Ernie
Ok, magic yeti and carnaw, you weights are on their way. I sent you a PM with tracking numbers.
Sacha, I didn't realize you have the brass portal covers until yesterday evening. They are a little thicker than the stock ones, so the weights hit them just before they snug up. So a couple things to fix that. I use a dremel and remove a couple mm of material from the inside of the weights mounting segment. You need to grind from screw hole to screw hole. Or you can remove the material from the pretty portal covers. Another thing you can do is put a little E6000 glue, or Shoe Goo in the holes on the portal and screw the weight on just so the screws are snug. The glue will keep the screws from backing out, yet will let you remove them without a problem. This will work for anyone else who wants to use my weights with the MFR portal covers. "thumbsup"
Ernie
Sacha, I didn't realize you have the brass portal covers until yesterday evening. They are a little thicker than the stock ones, so the weights hit them just before they snug up. So a couple things to fix that. I use a dremel and remove a couple mm of material from the inside of the weights mounting segment. You need to grind from screw hole to screw hole. Or you can remove the material from the pretty portal covers. Another thing you can do is put a little E6000 glue, or Shoe Goo in the holes on the portal and screw the weight on just so the screws are snug. The glue will keep the screws from backing out, yet will let you remove them without a problem. This will work for anyone else who wants to use my weights with the MFR portal covers. "thumbsup"
Ernie
magic_yeti
RCC Addict
thx ernie "thumbsup", i hope it's not a rowing boat :mrgreen:
magic_yeti
RCC Addict
Ernie thx the Rowling boat arrived[emoji41] great craftmanchip.
Front weights fits also on yeah racing Bras Portal Covers, Just a little sanding on one side was nessesary, only few 1/10mm
Gesendet von meinem Nexus 5 mit Tapatalk
Front weights fits also on yeah racing Bras Portal Covers, Just a little sanding on one side was nessesary, only few 1/10mm
Gesendet von meinem Nexus 5 mit Tapatalk
Thanks Sascha, Glad you finally got them, and they look good on your truck. Where did you have to clearance, this is the first Yeah racing portal covers they have bin used with? Have fun with them!"thumbsup"
Here is a PM I got today that I wanted to share with you TRX-4 guys.
Originally Posted by El Matador
Just would like you to know that I did a comp this weekend.
my bone stock trx-4 on a very rocky course that 2.2 were having problems I won the class as well as the tug of war.
I can honestly say that your wheel weights were so obvious of an advantage that guys were complaining about them. I ran against highly modified trx-4 and every other make. My bone stock servo was cooked at the end of round 2 (I have at least 15 packs (5800 lipo) through it. Not bad for stock.
I had a score of 34 and 31 the winner of the 2.2 unlimited had a 29/33.
It was amazing seeing my rig going through the rocks and seeing other trx-4. I never even adjusted the shocks yet!
Thank you again for giving me this unfair advantage.
I'd say another happy customer!;-);-)
Ernie
Here is a PM I got today that I wanted to share with you TRX-4 guys.
Originally Posted by El Matador
Just would like you to know that I did a comp this weekend.
my bone stock trx-4 on a very rocky course that 2.2 were having problems I won the class as well as the tug of war.
I can honestly say that your wheel weights were so obvious of an advantage that guys were complaining about them. I ran against highly modified trx-4 and every other make. My bone stock servo was cooked at the end of round 2 (I have at least 15 packs (5800 lipo) through it. Not bad for stock.
I had a score of 34 and 31 the winner of the 2.2 unlimited had a 29/33.
It was amazing seeing my rig going through the rocks and seeing other trx-4. I never even adjusted the shocks yet!
Thank you again for giving me this unfair advantage.
I'd say another happy customer!;-);-)
Ernie
Last edited:
magic_yeti
RCC Addict
just a little bit on the inside at the screw hole and one had a little offset between the rings. hope that descripe it right. if i have them of next time i will make a pic. no problem at all my dremel solved it.[emoji41] [emoji106]
Gesendet von meinem T1-A21L mit Tapatalk
Gesendet von meinem T1-A21L mit Tapatalk
I just did a little treatment to the Codyboy Wheel Weights using a product called Brass Black, its an acid and I believe it just tarnishes the metal.
I took some pictures as I did it,
I took everything apart and hit it with some steel wool
Degreased with denatured alcohol
I used a cotton swab to dab the brass with the brass black. The liquid is clear but turns dark blue as it touches the brass.
first coat
the cardboard worked out good, the brass black liquid soaked in an helped to get the sharp edges where the liquid wanted to pull away (surface tension). I flipped it and applied it to the other side while letting the bottom soak on the wet spot.
after putting it face down and flipping it the coverage was a lot better
Then I rinsed with water, they say to wipe it down with a soft rag but doing so was wiping off the tarnish so i did one more coat and just rinsed. they recommend a sealer but I'm not going to bother with it.
I forgot to snap a picture of it dry, but the color ended up a bit on the gray side.
EDIT: heres a few shots
I'm pretty pleased with the results.
I took some pictures as I did it,
I took everything apart and hit it with some steel wool
Degreased with denatured alcohol
I used a cotton swab to dab the brass with the brass black. The liquid is clear but turns dark blue as it touches the brass.
first coat
the cardboard worked out good, the brass black liquid soaked in an helped to get the sharp edges where the liquid wanted to pull away (surface tension). I flipped it and applied it to the other side while letting the bottom soak on the wet spot.
after putting it face down and flipping it the coverage was a lot better
Then I rinsed with water, they say to wipe it down with a soft rag but doing so was wiping off the tarnish so i did one more coat and just rinsed. they recommend a sealer but I'm not going to bother with it.
I forgot to snap a picture of it dry, but the color ended up a bit on the gray side.
EDIT: heres a few shots
I'm pretty pleased with the results.
Last edited:
They look nice Casey, that should make them blend in really nice.
Are you going to take your Trx-4 and ascender to the RPP Jamboree. I 'm going to try and call Jim Logg at RPP tomorrow and find out if the fires are going to cause changes in the event? "thumbsup"
Ernie
Are you going to take your Trx-4 and ascender to the RPP Jamboree. I 'm going to try and call Jim Logg at RPP tomorrow and find out if the fires are going to cause changes in the event? "thumbsup"
Ernie
Yep, the Ascender and TRX-4 are coming with me along with my wraith.
I was wondering how the fires might play out too, I really hope its still on.
Hey Digdat0 thanks for the kind words! Rules say I can't talk about price for products so I will send you a PM with details. I see you are in Oregon, if your ok with saying on here, what part? I'm in Oakridge. "thumbsup"
Ernie
I just spoke to someone at RPP and they said the Jamboree is still a go, I'm happy
Hey Casey, I think I may have something that may make you even a little happier. We had dinner with Kelly and Barb Lunsford tonight and I may have some titanium links for you to test on your TRX4, at the Jamboree, including steering links. We will be at the condo in Nice around 4 Thursday evening. Do you have an idea when you will make it down? Now you have to allow time to switch links out!!!!! I may even have a Lunsford Tee for you! :ror::ror:8)
If you pm me with your cell # Marcia will send you directions. ;-)
Ernie
That's awesome, I'd love to test them out. I think I can swap them out lickety split.
Let me just get this out of the way though, Whats the main point of the titanium links? Mainly strength? or is it weight too? Pardon my ignorance.
It is the weight, and the titanium slides on the rocks better than must other materials. "thumbsup"
Ernie
binaryterror
I wanna be Dave
Titanium links are actually lighter than the stock Steel pieces.
Benefits of Titanium over steel links is the sliding over rocks, the strength, and titanium is a memory metal which means even if you get it in a bad bind to bend slightly it's going to return to shape, not remain bent.
