Badd's 2.2s say what ?

[Badd]

well I got most everything buttoned up today . I hope to do a shake down run tommorow or Thrusday .

here is the always ask for FLEX shots .



shock info
Traxxas Bigbores
shock cap mod (done with T-maxx rodends)
jeepindoug mini T cups
mini T pink springs on front
with 4mm external limiters on the fronts
mini T red springs on the rear
with 4mm external limiters on the rears and 2mm inside

[toby5240]

man i realy dig this rig looks like it will preform well !
hope to see it in person !

[TEDROCKZ]

I need to copycat that BTA tierod Sunday. This 8* degree zero ackerman AX10 set up is pestering me. It will have Wraith/XR pieces on it next week. Wish I had time to order and change it this week.

[Badd]

I got to get out and run the rig a few mins . It was so hot I couldn't take more than 30 or 40 mins . The rig did very well, I pull some line that had me saying hmmmmmm . I can't wait to get it on the big rock at LRC this weekend . I need to pick up some red thread lock for the drive shafts the blue is not cutting it .
here is a few pics

[helhedded]

Originally Posted by Badd

The rig did very well, I pull some lines that had me saying hmmmmmm .

No kidding... S class rigs really do pull off some amazing lines. No clod stall.

[Badd]

Here is a little something I put togather from clips shot today . It is hard to video and drive . lol So don't be to hard on me .
http://youtu.be/m7aWYRKDcGk

[jeepcj578]

Looks like the truck did good, driver looks rusty

[olblueyez]

Originally Posted by jeepcj578

Looks like the truck did good, driver looks rusty

Super Nice Rig!!! Great video too. White is cool, you don't see that much. Can we get top and bottom chassis shots without the body?

[Badd]

Originally Posted by olblueyez

Super Nice Rig!!! Great video too. White is cool, you don't see that much.

Thanks

[Badd]

Originally Posted by jeepcj578

Looks like the truck did good, driver looks rusty

Rig did do good, driver was playing catch up . lol I got to get a lot more time in on it for sure .

[Badd]

Thanks I was not sure about the white paint but it grows on you. Here is a few pics top bottom and side with body off .

Sent from my SCH-S720C using Tapatalk 2

[fernando]

Looks great overall, and should perform just as good. Nice rig!

[Badd]

Originally Posted by fernando

Looks great overall, and should perform just as good. Nice rig!

Thanks

[Badd]

Well my Blue Monkey weights for the VP XR-10 knuckles came in yesterday . All I can say is holy crap these are super nice . I hung 1 small banana on the outside (inside the wheel). I hung 1 large banana on the inside . Total weight per side is 3.5 oz . The rigs RTR weight is 5.50 LBS .

Sent from my SCH-S720C using Tapatalk 2

[4xFord]

Nice, lookin good Andy! I like the black coating on the weights, looks durable.

Can't wait to comp these cars at nats!

[TEDROCKZ]

Bananas

[Badd]

Originally Posted by TEDROCKZ

Bananas

Yep thats right monkey boy . lol

Sent from my SCH-S720C using Tapatalk 2

[Badd]

Well the rig needs a few fixs here and there . But over all I will say it did pretty good for it's 2nd outing . Now if we can get the driver up to speed . I ended the day with a +12 on the day . I think when it was said and done Joe said we run somewhere around 80 gates . Oh and was the only one to finish the finals course . I did have 1 repair, silly micro dean pin messed up on a battery . I had one other course I racked up a few points on as well . But for the most part scores where very good (I thought) . That is for a very rusty driver .

[Badd]

Well after this weekends comp I found a few things I want to change right away .

1st
The stage 3 lockers are good for scalers not so much so for comp rigs . I want to loose some of the weight and also the slop . FELSENFEST spools have been ordered .
2nd
I was really disapointed in the JunFac drive shafts . That have always served me well in my scalers . But they have more slop than I can stand on the comp rig . So I ordered so Wraith wildbores and plan on doing some mods to them .
3rd
With running the wildbores I will need to get the right gear sets or drill my pinion gears . Not sure what I will do yet .
4th
I'm going to rework the rear lower linking . They are kicked up to much .
5th
Save some weight here and there . Some of the mods listed about will help that .

[Stormin2u]

It's really come together since I was here last. I'm digging your rig Andy and we all know your a driver. I'm loving the S class getting it up and running has been a real solid idea.