RCCrawler Forums

Rockpiledriver · 06-11-2007, 11:05 AM

Quote:

Originally Posted by DaViolentOne

I had the pleasure of meeting one of the "RC Guys" at a comp yesterday and he had mentioned that testing that is being done now with some Scorpions is going well and they're ironing out the wrinkles and spraying the bugs with generous amounts of RAID...

What did you say?

DaViolentOne · 06-11-2007, 01:32 PM

RC Guy.. The Gecko line of chassis' and so on... I met one of them yesterday at a crawl comp we had and he was tellin' me about the AX10 of what he knows... And what he knows was what I was sayin' there... The AX10 is being tested now to work out the bugs and wrinkles...

That a bit better to understand? heh Mebbe I DO need more than 1 cuppa in me beore i post sometimes... heh

Rockpiledriver · 06-11-2007, 05:26 PM

It's confusing when you say testing "some scorpions" when this thread and the press release both say that currently the tranny is the only piece being tested, and that test is being done by Axial themselves.

DaViolentOne · 06-12-2007, 10:12 AM

I kinda thought the same thing, too... >shrug< it's hard to tell what's what, but, ya never know.. They may have a prototype or 2 out there running that we donno about yet...

Either way... They'll be here soon enuff and we can start tearin' 'em down and makin' 'em ours...;)

Natedog · 06-13-2007, 12:52 PM

Quote:

Originally Posted by dezfan

...Still think it could use a slipper!:-P

X2, slipper is beneficial.

ElectronJunk · 06-15-2007, 11:06 PM

I just noticed on Tower Hobbies site that the AX10 has been pushed back to an August arrival date. When I ordered it said June.:-(
ElectronJunk

chafee · 06-16-2007, 01:22 AM

hey axial! why dont you have the testing done BEFORE you go promoting it? makes sense dont it?

chafee · 06-16-2007, 01:25 AM

Quote:

Originally Posted by DaViolentOne

I kinda thought the same thing, too... >shrug< it's hard to tell what's what, but, ya never know.. They may have a prototype or 2 out there running that we donno about yet...

Either way... They'll be here soon enuff and we can start tearin' 'em down and makin' 'em ours...;)

yeah whatever, rtr crawlers will make them as lame as t-Maxxes!!! Viva LA Pullers!!!!!!!!!!!!!!!!!!!!!!

screaminsavage · 06-17-2007, 10:39 PM

Quote:

Originally Posted by chafee

yeah whatever, rtr crawlers will make them as lame as t-Maxxes!!! Viva LA Pullers!!!!!!!!!!!!!!!!!!!!!!

yeah but if the tranny and axles turn out as good as their looking, they'll be worth the pre-order price alone. besides we don't all have badazz mamoths to pull with.

screaminsavage · 06-17-2007, 10:43 PM

Quote:

Originally Posted by chafee

hey axial! why dont you have the testing done BEFORE you go promoting it? makes sense dont it?

and stop whining, they still have two or three push backs if they plan on keeping up with the other big boys, so lets just hope this dates right.

ps you still owe me 15$ chafee

Turps · 06-18-2007, 06:36 AM

I am looking forward to this thing being finished. Looks like it will be good for a hopeless noob like me.

BJoe · 06-18-2007, 08:47 PM

Quote:

Originally Posted by screaminsavage

and stop whining, they still have two or three push backs if they plan on keeping up with the other big boys, so lets just hope this dates right.

Ain't that the truth!

Eagle-Mark · 06-19-2007, 11:44 PM

Quote:

Originally Posted by ElectronJunk

I just noticed on Tower Hobbies site that the AX10 has been pushed back to an August arrival date. When I ordered it said June.:-(
ElectronJunk

Mine said the same thing...

DaViolentOne · 06-20-2007, 11:49 AM

The last update from Axial here was middle of July... But who knows... Mebbe someone from there'll come back in and update us yet again...

Zurbz · 06-20-2007, 02:52 PM

Quote:

Originally Posted by DaViolentOne

The last update from Axial here was middle of July... But who knows... Mebbe someone from there'll come back in and update us yet again...

remember RCP said they would have a 10 day advance on everyone else with their shipment

DaViolentOne · 06-21-2007, 12:47 PM

Quote:

Originally Posted by Zurbz

remember RCP said they would have a 10 day advance on everyone else with their shipment

Aw YEA... That's what I wanna hear... hehe It seems pre-ordering thru RCP was more than a bonus after all... Gettin' it 10 days before anyone else just raises the bar that much higher... SCHVEET...

Matt.k · 06-21-2007, 02:45 PM

Just wanted to give everyone a quick update.

Testing has gone well, no major issues up to this point. There are a few loose ends to wrap up but otherwise we are in full production on 90% of the parts. The ship date is still mid-July from the factory and should hit most stores towards the beginning of August.

Here is just a little teaser photo for everyone.

Thanks,
Axial

PS. It can articulate quite a bit more than shown once you trim the body.

james12s · 06-21-2007, 02:50 PM

love it, i also like that the axles will be realeased a a seperate part, it could be the next tlt or clod axle

Rockpiledriver · 06-21-2007, 02:59 PM

Why is it so clean?

tltman12 · 06-21-2007, 04:18 PM

hey just a quick question, how come your site says $400 and towers says $249. Is it so they can get people to preorder it?

06-21-2007, 02:45 PM	#37
Matt.k Quarry Creeper Join Date: Sep 2006 Location: Orange, CA Posts: 365	Just wanted to give everyone a quick update. Testing has gone well, no major issues up to this point. There are a few loose ends to wrap up but otherwise we are in full production on 90% of the parts. The ship date is still mid-July from the factory and should hit most stores towards the beginning of August. Here is just a little teaser photo for everyone. Thanks, Axial PS. It can articulate quite a bit more than shown once you trim the body. Attached Images

06-11-2007, 01:32 PM	#22
DaViolentOne Rock Crawler Join Date: May 2006 Location: Surrey, BC, Canada Posts: 870	RC Guy.. The Gecko line of chassis' and so on... I met one of them yesterday at a crawl comp we had and he was tellin' me about the AX10 of what he knows... And what he knows was what I was sayin' there... The AX10 is being tested now to work out the bugs and wrinkles... That a bit better to understand? heh Mebbe I DO need more than 1 cuppa in me beore i post sometimes... heh

06-11-2007, 05:26 PM	#23
Rockpiledriver I wanna be Dave Join Date: Apr 2004 Location: SoCal Posts: 5,027	It's confusing when you say testing "some scorpions" when this thread and the press release both say that currently the tranny is the only piece being tested, and that test is being done by Axial themselves.

06-12-2007, 10:12 AM	#24
DaViolentOne Rock Crawler Join Date: May 2006 Location: Surrey, BC, Canada Posts: 870	I kinda thought the same thing, too... >shrug< it's hard to tell what's what, but, ya never know.. They may have a prototype or 2 out there running that we donno about yet... Either way... They'll be here soon enuff and we can start tearin' 'em down and makin' 'em ours...;)

06-15-2007, 11:06 PM	#26
ElectronJunk Newbie Join Date: Jun 2007 Location: Sioux Falls Posts: 22	I just noticed on Tower Hobbies site that the AX10 has been pushed back to an August arrival date. When I ordered it said June.:-( ElectronJunk

06-16-2007, 01:22 AM	#27
chafee Rock Stacker Join Date: Nov 2005 Location: woods cross Posts: 51	hey axial! why dont you have the testing done BEFORE you go promoting it? makes sense dont it?

06-18-2007, 06:36 AM	#31
Turps Newbie Join Date: Jan 2007 Location: Bendigo Posts: 26	I am looking forward to this thing being finished. Looks like it will be good for a hopeless noob like me.

06-20-2007, 11:49 AM	#34
DaViolentOne Rock Crawler Join Date: May 2006 Location: Surrey, BC, Canada Posts: 870	The last update from Axial here was middle of July... But who knows... Mebbe someone from there'll come back in and update us yet again...

06-21-2007, 02:50 PM	#38
james12s Pebble Pounder Join Date: Apr 2006 Location: kent,uk Posts: 138	love it, i also like that the axles will be realeased a a seperate part, it could be the next tlt or clod axle

06-21-2007, 02:59 PM	#39
Rockpiledriver I wanna be Dave Join Date: Apr 2004 Location: SoCal Posts: 5,027	Why is it so clean?

06-21-2007, 04:18 PM	#40
tltman12 Quarry Creeper Join Date: Apr 2007 Location: . Posts: 314	hey just a quick question, how come your site says $400 and towers says $249. Is it so they can get people to preorder it?

Sponsored Links

RCCrawler Forums

Thread: AX10 Scorpion Update