|
| LinkBack | Thread Tools | Display Modes |
12-07-2020, 06:48 AM | #1 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| B-MOW's SCX10 III JT Gladiator Trail Warrior
New Jeep rolled into the shop! The Axial SCX10 III JT Gladiator has been on my radar to pick up ever since they were released and finally broke down and purchased one a couple days before Thanksgiving. I've been very impressed with the performance of my 10.3 JLU Rubicon and really like the look of the longer wheelbase JT Gladiator that I decided that I had to have one in my rig lineup! I wasn't planning on doing a build thread for the Gladiator, but I've noticed that there isn't very many of the JT threads here on RCC. There are a couple nice build threads of the JT that I am following here and have enjoyed reading thru them. So I figured I may as well add another thread of the Gladiator to log my journey into making this JT even better and to give others a look at what I plan on doing to it. I've been watching a ton of YT videos and checking out pics on IG and FB of the Gladiator's that others have built and have seen some really cool looking rigs. The rig that really stood out the most and I instantly fell in love with was the Gladiator that Mad Ape built. His Big Red Ape Gladiator looks absolutely gorgeous and BAD ASS! Love how it looks and all the details that were added to it. It has a mean look with it's nice wide stance and has that lifted look. This is not the type of rig that I would normally build as I like to keep my rigs sitting low, but I'm wanting this build to be more of an overlander type rig since the Gladiator is designed to carry cargo and most 1:1 JT's I've seen have been converted into an overlander. Anyways, here are the first pics of the JT right out of the box. More fun stuff coming soon! |
Sponsored Links | |
12-07-2020, 07:36 AM | #2 |
RCC Addict Join Date: Aug 2020 Location: Jacksonville
Posts: 1,315
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
Sub'd. Nice to see another one in the forum, is on my short list for next rig since I've decided the TW will satisfy my crawling needs for the time being. Overlander was my thought for this one as well, it suits the platform.
|
12-07-2020, 09:27 AM | #3 |
Gold Star Baby! Join Date: Dec 2017 Location: Las Vegas
Posts: 2,554
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
Congrats Bmow! I really like the gladiators too, after seeing one in person last week it’s got the wheels turning in my head.
|
12-07-2020, 09:54 AM | #4 |
RCC Addict Join Date: Aug 2020 Location: Jacksonville
Posts: 1,315
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
I also like it because it got me thinking about a one-off build once I trashed the body, that longer wheelbase is interesting.
|
12-07-2020, 09:58 AM | #5 |
Pebble Pounder Join Date: Jan 2017 Location: Tucson
Posts: 120
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
Looking forward to seeing the direction you go with it. Sent from my moto z4 using Tapatalk |
12-07-2020, 10:39 AM | #6 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
Nice, looking forward to this. Sweet garage too!!
|
12-07-2020, 10:44 AM | #7 |
I wanna be Dave Join Date: Jun 2020 Location: The Big Island
Posts: 2,010
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
I too am looking forward to this. I agree with the overlander setup, it’s pretty much perfect for it. DMacs gladiator is setup for overland and it’s probably the best Gladiator I’ve seen. Anyways, excited to see where this goes! Sent from my iPad using Tapatalk |
12-07-2020, 11:49 AM | #8 |
I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK.
Posts: 12,563
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
One one the nicest looking rigs out of the box without a doubt! Looking forward to the build. 👍🏼 The SCX10.3 is very tempting, but with a new TRX6 and a UMG10 kit sitting on the bench, it might be a while for me. 😐 |
12-07-2020, 12:19 PM | #9 |
RCC Addict Join Date: Sep 2014 Location: Ft. Lauderdale, Florida
Posts: 1,229
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
SUBSCRIBED! Sent from my LM-G710VM using Tapatalk |
12-07-2020, 01:05 PM | #10 |
Rock Crawler Join Date: Dec 2018 Location: Ontario, Canada
Posts: 697
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
With all the detail out of the box, the Gladiator is a great start.
|
12-07-2020, 02:53 PM | #11 | ||||||
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior Quote:
Quote:
From what I've seen, the longer wheelbase does really well! That's the other reason why I wanted one. I didn't have any long wheelbase rigs in my collection! Quote:
Quote:
Thanks! I've enjoyed following your Gladiator thread! It is a great looking rig! Quote:
I agree, DMacs does look great! Quote:
Christmas IS right around the corner! Never know what Santa may bring you! THANKS MaX! Agree! Both the 10.3 JLU and Gladiator sure have the scale details! | ||||||
12-07-2020, 03:35 PM | #12 |
Slow is the new Fast Join Date: Nov 2013 Location: Winterpeg
Posts: 2,906
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
That looks fun B, look forward to seeing you have at it. I quite like the layout of the chassis. Do you run full size batts? I like your idea to swap in the straight axles and use the portals for another build. Win, win. You get set up for your next build early on...lol. There is no Doubt portals have their place in the hobby. |
12-07-2020, 03:39 PM | #13 | |
I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK.
Posts: 12,563
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior Quote:
| |
12-07-2020, 06:34 PM | #14 | ||
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior Quote:
I have a mixture of full size and shorty size batteries. I'll run them both, but lately I've been running the Helio's 3700mah 3S 45C batteries. They are shorter and smaller and have a long run time. Yeah, definitely getting the straight axles. Probably put them on my 10.3 JLU Rubicon and keep the portals on my Gladiator. Will save a big lump of money on the next build for sure! Quote:
Congrats on the deal! | ||
12-08-2020, 06:22 AM | #15 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
As with all of the RTR's I've purchased, I immediately tear them down to check to make sure everything is greased and put together correctly. During the rebuild, I replace every screw with Team KNK stainless steel hardware. So starting with the rear axle, I found that the portal gears were installed with the pins in the square side of the gear. I flipped them around so that the pin is seated in the correct side of the gear. Diff ring and pinion gears looked to be greased well. Cleaned them off and added marine grease to the diff and portal gears. On to the front axle. As you can see in the first pic, at first one of the portal gears seemed to be installed backwards. But after further inspection, the gear that looks to be installed incorrectly actually has the same pin groove cut into both sides of the gear. Odd!!! Here are pics of each sides of the gears. You can see the gear on the left has the same pin groove cut into both sides. The gear on the right has a square cut groove in one side and a curved cut groove on the other side. Cleaned stock grease out and replaced with marine grease. Both axle screws replaced with stainless screws. On to the transmission next. |
12-08-2020, 05:34 PM | #16 |
Quarry Creeper Join Date: Jul 2019 Location: Torrance, CA
Posts: 211
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
Congrats on the JT! And a big thanks for the clear pics on the gears. My JL has started having a slight click as she breaks in, so one of my goals over the holidays is to tear her down and check all the gears. Have to finish up the Pro first though...priorities! Looking forward to the creative things you do with this rig |
12-08-2020, 06:41 PM | #17 | |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior Quote:
Hey thanks and your welcome! I was hoping this may help others with their clickers! On my 10.3 JLU I found only one portal gear that was installed wrong. It had a slight click before I flipped the gear around. Flipping the gear took care of it. That’s the main reason why I immediately tore the Gladiator down to check all the gears. Luckily this trans in the Gladiator and my JLU trans had all the gears installed properly! Sent from my iPad using Tapatalk | |
12-08-2020, 07:20 PM | #18 |
Gold Star Baby! Join Date: Dec 2017 Location: Las Vegas
Posts: 2,554
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
Nice/odd to see a gear with both sides round-grooved but wish it was that way throughout the whole truck. Perhaps a running change that will phase out the square grooved gears eventually.
|
12-08-2020, 08:23 PM | #19 | |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior Quote:
That’s kinda what I was thinking. Only one gear like that in mine, but had to be made that way, so it could be that all the gears from now on may have the same round groove on both sides. There really is no need for the squared groove that I can see! Sent from my iPad using Tapatalk | |
12-09-2020, 06:33 AM | #20 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: B-MOW's SCX10 III JT Gladiator Trail Warrior
Next up was digging into the transmission. Great news here, the trans gears were all installed properly and had a good amount of grease from the factory. I cleaned out all of the factory grease and rebuilt the trans with marine grease. Took apart the shocks to add Noleen to the shock seals. I went ahead and added 40wt oil. I wanted to slow the suspension down a little. I love these shocks! They are easy to fill, super smooth and seem to be leak free! Also, moved the red springs to the front and the green springs to the rear. I wanted the rear to be a little stiffer since I plan on loading up the bed with overlander goodies. The red springs come stock in the rear and felt too soft for what I wanted. And a look at the chassis. Replaced all stock black screws with Team KNK stainless steel screws. |
B-MOW's SCX10 III JT Gladiator Trail Warrior - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SCX10 III Portals Swap on a SCX10 Trail Honcho | cubalz | Axial SCX-10 | 2 | 11-12-2020 10:03 AM |
Axial SCX10 III Jeep JT Gladiator RTR | sgtlt | Axial SCX10 III | 40 | 10-02-2020 10:46 AM |
1/10 SCX10 III Jeep JT Gladiator Rock Crawler with Portals RTR Item No. AXI03006 | Natedog | General Crawlers | 2 | 08-31-2020 10:06 AM |
Axial SCX10 III Jeep Gladiator | Paul_crawl | General Scale Talk | 29 | 08-21-2020 09:29 PM |
| |