RCCrawler Forums

Randy_4life · 04-05-2011, 01:00 AM

Got mine pre-ordered at my LHS i hope they dont get it too much later than its available on the internet

Natedog · 04-05-2011, 01:08 AM

Quote:

Originally Posted by dubAron

http://www.axialracing.com/ftp/ax900...racer_rtr.html

Yes!!!!!!!!!

Sweeeet, finally!

Highlucks · 04-05-2011, 02:02 AM

Its a ghost car...these dark highways are full of them..

dezrik · 04-05-2011, 02:05 AM

I wonder if the truck uses stock axial ax10/scx19 gear/pinion

MnRockCrawler · 04-05-2011, 02:25 AM

I just watched a vid of it. Not really my cup of tea. Its a cool concept though.

holycaveman · 04-05-2011, 02:39 AM

Wow! 11.6 in wide.

Axial just said "see ya later" to the 1.9 class

Great tt comp base though!

WK axles back in style again

I hope this means we will start to see some real scale large 2.2 bodies! That would be sweet!

R/CMaxximus5.0 · 04-05-2011, 03:12 AM

Nice. Way to go Axial.

I have a few gripes, nothing major. I'll just let everyone else P&M about it...

I'm not going to complain about a new Badass rig

I will have one!

dezrik · 04-05-2011, 03:25 AM

I bet 90% of all Axial based basher,crawler etc Products sold are to the avg joe who doesn't run in comps. Im loving the wide axles, I wish they were more 14"ish though.

MattH · 04-05-2011, 03:48 AM

Quote:

Originally Posted by dezrik

I wonder if the truck uses stock axial ax10/scx19 gear/pinion

Yes, but the input shaft now has a hole in it that allows the retaining pin to pass all the way through.

MattH · 04-05-2011, 04:09 AM

More photos, videos and details to come. We don't watermark photos so they be seen clearly and enjoyed, so please state where the images are from when you copy them to another site.

Agama · 04-05-2011, 04:45 AM

Quote:

Originally Posted by team3six

HUH? Hows that?
Scale: 1/10
Length: 19 in. (483mm)
Width: 11.6 in. (295mm)
Height: 9 in. (229mm)
Wheelbase: 13.5 in. (343mm)
Ground Clearance: 3 in. (76mm)

Nice

these are almost the exact specs of my KOH jeep. I will have one of these.

geekfreek95 · 04-05-2011, 05:08 AM

All ready selling my stuff for this I can't wait to get one and try it out

Turn'Nburn · 04-05-2011, 05:25 AM

Sold!!!

I can't wait!!

peter2117 · 04-05-2011, 05:27 AM

Here u go guys. Axial press relase:
http://www.axialracing.com/ftp/ax900...racer_rtr.html

16hp · 04-05-2011, 05:27 AM

Ahh, the sound of the aftermarket retooling in the morning.

Hey Casey, i'll have a set of extra long toobs please.

Nice truck, Axial.

Already imagining a storm trooper ride'n shotgun with a Schleich cowgirl.

These drive shafts and pinons will be nice on the scx and ax.

dezrik · 04-05-2011, 05:31 AM

Quote:

Originally Posted by peter2117

Here u go guys. Axial press relase:
http://www.axialracing.com/ftp/ax900...racer_rtr.html

Its been posted

vodka child · 04-05-2011, 05:32 AM

Reading through the specs and drooling at the prospect of picking one up

Had been looking at a Honcho to get bashing with, since a bunch of mates have various scalers rather than crawlers. The Wraith as a RTR will be great no plans to comp it just head out with mates.

Looking at CML in the UK who seem to the be the sole importer, they don't have a date or price yet though. Local model store is a CML redistributor so might have a wander down and see what he says

MostlyBS · 04-05-2011, 06:12 AM

I can't wait now. Getting the RTR to bash & test, then buy the kit when it's out.
Taadaaaa spare everything

Boogie · 04-05-2011, 06:56 AM

Very nice, Axial. I'm definitely in.

I'm most impressed with the new axles and driveshafts, pretty cool.

adamargue · 04-05-2011, 07:14 AM

The new axles look so good can't wait to get a set

View Poll Results: Should axial Release this now
YES	591	60.12%
NO	35	3.56%
Thrash the sh!t out of it and get the bugs are ironed out, so it does turn out like the xr-10	357	36.32%
Voters: 983. You may not vote on this poll

04-05-2011, 05:27 AM	#995
16hp Quarry Creeper Join Date: Jul 2010 Location: Gila & Cibola Posts: 363	Ahh, the sound of the aftermarket retooling in the morning. Hey Casey, i'll have a set of extra long toobs please. Nice truck, Axial. Already imagining a storm trooper ride'n shotgun with a Schleich cowgirl. These drive shafts and pinons will be nice on the scx and ax. Last edited by 16hp; 04-05-2011 at 07:11 AM.

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/axial-wraith/299196-new-axial-wraith.html
Posted By	For	Type	Date
check this out....sweeeeeeeeeeeeet!	This thread	Refback	10-05-2011 08:09 PM

04-05-2011, 01:00 AM	#981
Randy_4life Pebble Pounder Join Date: Feb 2011 Location: B.C. , Canada Posts: 130	Got mine pre-ordered at my LHS i hope they dont get it too much later than its available on the internet

04-05-2011, 02:02 AM	#983
Highlucks Try to Bend it Join Date: Aug 2009 Location: Perth Australia Posts: 3,163	Its a ghost car...these dark highways are full of them..

04-05-2011, 02:05 AM	#984
dezrik Rock Crawler Join Date: Aug 2006 Location: Pinedale, WY Posts: 873	I wonder if the truck uses stock axial ax10/scx19 gear/pinion

04-05-2011, 02:25 AM	#985
MnRockCrawler Quarry Creeper Join Date: Jun 2009 Location: Minnesota Posts: 247	I just watched a vid of it. Not really my cup of tea. Its a cool concept though.

04-05-2011, 02:39 AM	#986
holycaveman RCC Addict Join Date: Jan 2007 Location: Bouldertown Posts: 1,554	Wow! 11.6 in wide. Axial just said "see ya later" to the 1.9 class Great tt comp base though! WK axles back in style again I hope this means we will start to see some real scale large 2.2 bodies! That would be sweet!

04-05-2011, 03:12 AM	#987
R/CMaxximus5.0 Rock Crawler Join Date: Mar 2008 Location: 920 Valley of the Fox Posts: 768	Nice. Way to go Axial. I have a few gripes, nothing major. I'll just let everyone else P&M about it... I'm not going to complain about a new Badass rig I will have one!

04-05-2011, 03:25 AM	#988
dezrik Rock Crawler Join Date: Aug 2006 Location: Pinedale, WY Posts: 873	I bet 90% of all Axial based basher,crawler etc Products sold are to the avg joe who doesn't run in comps. Im loving the wide axles, I wish they were more 14"ish though.

04-05-2011, 04:09 AM	#990
MattH Quarry Creeper Join Date: Mar 2006 Location: Eastern North Carolina Posts: 411	More photos, videos and details to come. We don't watermark photos so they be seen clearly and enjoyed, so please state where the images are from when you copy them to another site.

04-05-2011, 05:08 AM	#992
geekfreek95 Quarry Creeper Join Date: Mar 2007 Location: Martins Ferry,OH Posts: 476	All ready selling my stuff for this I can't wait to get one and try it out

04-05-2011, 05:25 AM	#993
Turn'Nburn Rock Crawler Join Date: Nov 2009 Location: Southern, IN Posts: 862	*Sold!!!* I can't wait!!

Sponsored Links

04-05-2011, 05:27 AM	#994
peter2117 Rock Stacker Join Date: Sep 2010 Location: Southport UK Posts: 91	Here u go guys. Axial press relase: http://www.axialracing.com/ftp/ax900...racer_rtr.html

04-05-2011, 05:32 AM	#997
vodka child Rock Crawler Join Date: Mar 2010 Location: England & SoFlo Posts: 744	Reading through the specs and drooling at the prospect of picking one up Had been looking at a Honcho to get bashing with, since a bunch of mates have various scalers rather than crawlers. The Wraith as a RTR will be great no plans to comp it just head out with mates. Looking at CML in the UK who seem to the be the sole importer, they don't have a date or price yet though. Local model store is a CML redistributor so might have a wander down and see what he says

04-05-2011, 06:12 AM	#998
MostlyBS Pebble Pounder Join Date: Jan 2007 Location: Darwin Australia Posts: 148	I can't wait now. Getting the RTR to bash & test, then buy the kit when it's out. Taadaaaa spare everything

04-05-2011, 06:56 AM	#999
Boogie Quarry Creeper Join Date: Jun 2008 Location: Central KY Posts: 473	Very nice, Axial. I'm definitely in. I'm most impressed with the new axles and driveshafts, pretty cool.

04-05-2011, 07:14 AM	#1000
adamargue RCC Addict Join Date: Nov 2009 Location: Tulsa Posts: 1,667	The new axles look so good can't wait to get a set

RCCrawler Forums

Thread: New Axial - Wraith