Re: Harley's Guide to a Bulletproof Wraith Quote:
I just put 4 TopShafts in stock on the site We have to keep a certain amount out of stock for our "BOMB PROOF" Complete Trans builds The New TopShafts will be ready for shipping sometime end of next week Sorry for the Delay........:oops: our Machinist is trying to catch up to us With many Innovative Products Coming out soon Stay Tuned BIG Fat Kisses to "Harley" for putting together this complete Bomb Proof Wraith thread ;-) Best Regards Your SuperShafty Staff |
Re: Harley's Guide to a Bulletproof Wraith Quote:
|
Re: Harley's Guide to a Bulletproof Wraith Quote:
|
Re: Harley's Guide to a Bulletproof Wraith indeed what I thought. I went with the stock shaft, slipper, & gear, after replacing the bottom & idler with RRP steel. I don't need the full bulletproof (27T brushed 3s max) but I would feel better if all my gears were hardened steel, so its not really worth it to me to get everything else. I would buy a hardened steel gear for the stock shaft or a 1 pc drop in if it ever shows up. Thanks for a quick response |
Re: Harley's Guide to a Bulletproof Wraith I bought the proline slash shocks and the DLUX shockends my question is what keeps the shock from floating side to side on the shock ends? Are they supposed to snap in the shock end cap? |
Re: Harley's Guide to a Bulletproof Wraith WOW!!! just seen "THE" post. Thanx again,Harley & SUPERSHAFTY!!!! Had to have it... |
Re: Harley's Guide to a Bulletproof Wraith I apoligize...I just checked Dlux shock caps,nice mod on these!!! So why do they not make any for Axial comp shocks??? or do they searching... |
Re: Harley's Guide to a Bulletproof Wraith [QUOTE=v84x4;4282270]Hi Guys........ I just put 4 TopShafts in stock on the site We have to keep a certain amount out of stock for our "BOMB PROOF" Complete Trans builds The New TopShafts will be ready for shipping sometime end of next week Sorry for the Delay........:oops: our Machinist is trying to catch up to us With many Innovative Products Coming out soon Stay Tuned BIG Fat Kisses to "Harley" for putting together this complete Bomb Proof Wraith thread ;-) Best Regards Your SuperShafty Staff[/QUote "thumbsup" My order is in!!!Thanx |
Re: Harley's Guide to a Bulletproof Wraith Quote:
|
Re: Harley's Guide to a Bulletproof Wraith using cut fuel line works also... |
Re: Harley's Guide to a Bulletproof Wraith Thanks guys. I figured there was a way to fix it |
Re: Harley's Guide to a Bulletproof Wraith Hey Harley.......... Here's what happens when you run 5mm outPuts on 4S LiPo with all Steel and aluminum HopUp Parts from Vanquish, MIP and SuperShafty. there's just not enough Meat around the hole of the 5mm outputs to take the abuse of the extra power http://www.rccrawler.com/forum/membe...3214-44067.jpg Thought I'd share...............;-) 6mm Chrome Moly outputs available in 2 weeks or less......... Regards Rick |
Re: Harley's Guide to a Bulletproof Wraith That was always my concern with the Robinson 1-piece setup. All my parts are in, I'll building my trans tonight! Quote:
|
Re: Harley's Guide to a Bulletproof Wraith 6mm outputs ??? It worked last time when I chimed in about topshafts...got bombproof tranny build ready & waiting for SS outputs to complete ...no hurry just dont want to miss out on availability!!!"thumbsup" |
Re: Harley's Guide to a Bulletproof Wraith Quote:
|
Re: Harley's Guide to a Bulletproof Wraith Got my eye on SS ready to order 6mm outputs & ax10 motor plate...when MIP shafts get here its time to build!!! |
Re: Harley's Guide to a Bulletproof Wraith Thanx again SS!!! Got order in & cant wait to get started on (bulletproof build). |
Re: Harley's Guide to a Bulletproof Wraith hi ive been looking through but cant see anything on which place is the better mount for the servo either stock diff or chassis...??? I can see pros and cons with both so just thought id see what everyone else thinks. also its my 1st post under this user name as I cant remember my info from years ago as im just getting back into rc crawlers 8)8)8) |
Re: Harley's Guide to a Bulletproof Wraith Harley, Thanks for the amazing guide you've put together here, I'm totally new to RC and crawlers and your write up it's been a ton of help. Now, on your parts list, the front axle's Axial HD gears link takes me to RPP's page and the set of gears there are 38/13 which I believe is the stock one. Are you going with 38/13 and 48/13? or 36/14 and 43/13? Axial's website talks about using 36/14 and 43/13 for UD and OD (look at me throwing lingo around already) Anyway, the only reason why I'm asking is because I'm still learning and this one got me confused. Plus, I just got a Wraith Kit and it comes with 38/13 x2 of course but I could start there I guess. I'm set on a HH TorqueMaster 35t and the BRXL and some of the gearing proposed here. Thanks a lot! |
Re: Harley's Guide to a Bulletproof Wraith Quote:
I run the stock ratio in both the front and rear except in the HD version. Running the mixed ratios in these rigs causes a lot of stress on the pinion bearings and can lead to failure. They are great when crawling but at speed they are tough on things. |
All times are GMT -6. The time now is 01:23 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com