04-18-2013, 10:57 AM | #1 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Why not.... for sale section build
Hey everyone, decided to give the wraith another go.. it just wasn't my thing with the first one. Now I'm a little more planted and have all other classes built. So time for a project.. I got lucky an picked this up off the for sale section.. Never ran! VP links VP steering rods VP vvd's Aluminum chubs an knuckles Hitec 7955 Junfac shafts Motoworkz wheels Pitbull rock beasts II's Old style CI dual foams Hinged hood Battery an electronics forward Getting some inspiration from dez at a "local" comp past Sunday with his wraith J, using a bushwhacker body, I wanted to find a body donor.. well I happen to have this sitting around an haven't seen one yet.. ( which came from the for sale section, last year, as well) I decided to get my favorite tool out, dremel, an start cutting.. Getting closer.. Well that was it for 2a.m. cutting.. the whole body is a inch or so long, so I have to figure out how I'll cut the rest to fit.. more coming.. |
Sponsored Links | |
04-18-2013, 11:58 AM | #2 |
Pebble Pounder Join Date: May 2007 Location: Little Rock
Posts: 194
| Re: Why not.... for sale section build
Pic of the front clip reminds me of a karnivore krawler, you may have convinced me to go a different direction for my new build
|
04-18-2013, 01:17 PM | #3 |
RCC Addict Join Date: Oct 2011 Location: Crawlerado
Posts: 1,582
| Re: Why not.... for sale section build
Looks like you're off to a great start! What did you pay for that bad boy?
|
04-19-2013, 05:07 AM | #4 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
The cost of upgrades..... I'm at a stand still between what I want an what i feel my abilities.. or maybe a step back is all it will take.. any who.. This what I'm goin for.. This is what I'm getting.. And this is the diff.. From what I know, the middle needs cut an back together.. I thought bout area between the doors an matching the top an bottom of the X's up.. but no screws to hold it together.. not a body guy, its not CF.... Thought bout cutting it to match at both ends an securing it where the screws are.( in front of door an behind rear door area) Etc etc etc.. I have Ideas.. no body experience to back it up.. looking for some suggestions an help.. Edit: the issue I'm having is.. I would like to keep the rear door jam at the rear brace.. the front matching up to the hood area... Last edited by winnerone23; 04-19-2013 at 05:11 AM. |
04-19-2013, 06:52 AM | #5 |
Newbie Join Date: Mar 2008 Location: Canada
Posts: 34
| Re: Why not.... for sale section build
nice!
|
04-19-2013, 08:23 PM | #6 |
RCC Addict Join Date: Aug 2007 Location: Marshalltown
Posts: 1,003
| Re: Why not.... for sale section build
I like it, Thinking outside of the box is awesome. (get better lighting)
|
04-19-2013, 09:03 PM | #7 | |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Quote:
I think I figured out my cut.. the back door is goin to be 3rd door sized.. like a ext cab Tacoma. Take a inch out of the middle of the X on the door an match what's left? Last edited by winnerone23; 04-19-2013 at 09:05 PM. | |
04-19-2013, 10:22 PM | #8 |
RCC Addict Join Date: Oct 2011 Location: Crawlerado
Posts: 1,582
|
Take out the inch, then 'shave' the rear door off. Chicks dig 2 door bummers. ;)
|
04-20-2013, 12:14 AM | #9 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
The doors will be last thing done.. until everything else is on place.. so I started with the rear fitment. I cut the bed in half to start getting things lined up.. I'll get everything in place an worked over before I rebuild the body to one piece.. I also got rid of the rear portion of the "roll cage" I didn't want to cut the roof, so I bent it down behind the cab. I like it... Next is a few choices for support/bracing/looks... a little help/opinions? 1. 2. 3. I also got electronics around.. Fxr that's getting a 4s cap, cc bec, airtronics rx, HH 17t crawlmaster, an a 7955... all for now, its what I have.. ( all thanks to the members of rcc, from the for sale section). :thumbup: |
04-21-2013, 02:29 PM | #10 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
Few more changes, in prep for my ride height.. flipped the link an shock mounts f/r.. Swapped out the shocks for another set of full aluminum wraith shocks.. Its now semi droop and a 3" ride height.. Then I decide it was time to do electronics.. at 230 a.m... I just pulled it apart.. So now ur all caught up. Now its time to get to work |
04-21-2013, 09:54 PM | #11 |
RCC Addict Join Date: Oct 2011 Location: British Columbia
Posts: 1,487
| Re: Why not.... for sale section build |
04-22-2013, 12:28 AM | #12 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
That's a lot of stuffs to fit in a tiny box! Fxr with 25v cap, for 4s use. CC bec, an the airtronics rx.. But..... all done an fits just right! Yep, that's a 4s Battery! I also ran the motor wires under the tranny.. well I found out it didn't have too.. lol. Oh well . Last edited by winnerone23; 04-22-2013 at 12:31 AM. |
04-22-2013, 10:16 AM | #13 |
I joined the Band! Join Date: Aug 2009 Location: Maryville, Tn
Posts: 1,198
|
She is lookin good!!! Glad to see it gettin put to got use!!:cool:
|
04-22-2013, 10:53 AM | #14 |
Quarry Creeper Join Date: Jan 2013 Location: Spokane
Posts: 388
| Re: Why not.... for sale section build
Looking sweet!
|
04-22-2013, 10:57 AM | #15 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Thanks.. oh she's goin to get used! Cage is goin back on shortly an out for a Madden voyage! She is rolling on her own power an from what little bit, in the basement, I ran it.. its goin to smoke a trail run! That was only on 2s too.. 4s is goin to be insane!
|
04-22-2013, 07:03 PM | #16 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
Ok, initial shake down is done.. The rig performs real good, way better then the rtr one I had.. I prolly wouldn't of got rid of it if it was half this good! Any who.. tie rod an horn kept needing tightened, which isn't any big deal.. longer screws with nuts are goin on.. the rear falenfest locker kept coming loose an 3wd is no fun! So its sitting in loctite right now. The 17t HH is pretty sick! 87/16 gearing.. plenty of torque good top end on 3s.. 4s, WOW! NOT For crawling! Tho a blip of the throttle rockets over a obstacle... Trail runs, g6, an the poker/dash run this weekend is goin to be bad a$$! The rocker II'S grip, bite, crawl, an rally race extremely well. I'm excited to get panels done an run this more tomm. I'll get some pics up as well |
04-23-2013, 08:26 AM | #17 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
Not much, but worked the rear braces with what I had on hand, that fit without modding. I'm kinda glad I didn't cut the roof off.. I like it. A little paint I got at rauch comp last year, figure it was a good time to use it. Get rid of that ugly stock look.. till I get the Hummer panels finished up. |
04-23-2013, 08:53 AM | #18 |
RCC Addict Join Date: Oct 2011 Location: Crawlerado
Posts: 1,582
| Re: Why not.... for sale section build |
04-23-2013, 09:34 AM | #19 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| |
04-24-2013, 04:58 AM | #20 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
A little nicer than the stock look. Bout ready for its beating this weekend... Not digging the hole in the hood so I'm goin to slap some quick stick on cf stuff on it for the time being.. ( it doesn't feel right, lol.. stick on cf, wtf)... The rear "tailgate" is goin to be real CF. Since the rear brace made the rear wider, I'll screw the panels to the CF.. I may also pull the roof an hit it with black.. maybe the stick on cf..? |
Why not.... for sale section build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
For Sale section....... | EdmontonTrader | Comments, Suggestions, and Help | 78 | 05-11-2015 07:34 AM |
Sale Section | Hemipower23 | Comments, Suggestions, and Help | 7 | 09-13-2010 12:38 PM |
Wanted section and for sale section | InFlames | Comments, Suggestions, and Help | 13 | 10-20-2008 09:12 AM |
4 sale section/wanted section ????? | stevew | Comments, Suggestions, and Help | 21 | 12-14-2006 06:38 PM |
Do any noobs in the wanted section read the 4 sale section? | Unimoger | Chit Chat | 11 | 01-24-2006 12:21 PM |
| |