Genuine factory Axial option parts list

[ra272]

Originally Posted by Rxracer

I've been thinking the same thing. Releasing a new yeti xl and haven't even finished the 2 speed for the yeti.... A little frustrating.

Same here, I've sold my Twinhammers for the Yeti but I really miss the two speed gearbox.

[WesTX]

Good, wasnt a dumb question..... I havent bought one yet, toss up between a yeti and a TH

Looking at stock specs, has a 3 channel reciever on the car but only a 2 speed radio. Therefore a radio upgrade would be required (unless that is a misprint from Axial). I would really like the 2 speed gearbox based on the TH I demoed.

Wes

[mfishr]

So Brandon, when are the Axial Trailing Arms going to be out for us to buy???????

[Brandon]

Originally Posted by WesTX

So for a newb here, whats the deal with the optional 2 speed transmission? Just curious as I havent seen those optional parts anywhere.

Wes

Originally Posted by Rxracer

I've been thinking the same thing. Releasing a new yeti xl and haven't even finished the 2 speed for the yeti.... A little frustrating.

We are working hard on the 2 speed parts and will release them once they are as durable as we can make them.

Yeti XL has been in development much longer than the 1/10th Yeti. Timing just worked out that way, definitely was not intentional and has not taken away from the 2 speed development

Originally Posted by WesTX

Good, wasnt a dumb question..... I havent bought one yet, toss up between a yeti and a TH

Looking at stock specs, has a 3 channel reciever on the car but only a 2 speed radio. Therefore a radio upgrade would be required (unless that is a misprint from Axial). I would really like the 2 speed gearbox based on the TH I demoed.

Wes

Correct, the AX3 radio is only a 2 channel. You will need a 3 channel TX/RX to operate the additional servo required when the 2 speed components are available.

[Brandon]

Originally Posted by mfishr

So Brandon, when are the Axial Trailing Arms going to be out for us to buy???????

Once I post the info on them they will be really close.

[ra272]

[QUOTE=Brandon;4913598]We are working hard on the 2 speed parts and will release them once they are as durable as we can make them.

Yeti XL has been in development much longer than the 1/10th Yeti. Timing just worked out that way, definitely was not intentional and has not taken away from the 2 speed development



Thank you for your answer, I'm sure Axial is working hard to give us the best parts possible.

For now, I swap the motor pinion from 16 to 12 teeth when I some crawling speed.
If you can confirm that the two speed parts won't be out soon (weeks or month ?), I'll buy a few
3S packs in order to have both speed and crawl ability.

[WesTX]

So when do some of the Axial hop up parts start coming out for the XL? Pre-ordered mine today, couldn't resist the urge anymore. Looking forward to the bling un-breakable parts to start coming out.

Wes

[802coma]

Any ETA on the yeti 2 peed parts? Gonna be starting to build mine up and really like to know what motor I should be throwing in it.

Thanks!!

[npcaldwell]

Hey Brandon I'm also wondering about the 2 speed, can you at least tell how things are going with the development process? What has needed fixed from the original design and such? Oh and a ship date would be cool too

[RichMTB01]

Cool, I just got my 4 link mounts, rear shock mounts and front shock tower for my build.

[dasco]

Originally Posted by npcaldwell

Hey Brandon I'm also wondering about the 2 speed, can you at least tell how things are going with the development process? What has needed fixed from the original design and such? Oh and a ship date would be cool too

I would like an eta as well if at all possible on the 2 speed tranny

[ra272]

There are new options available on the Axial Website (link plates, front locker, turnbuckles).
Axial Racing - Yeti

Now upate on the two speed tranny...

The yeti was clearly designed to have one, but I wonder if they have changed theyre mind...

Btw, anyone know what is this part Ax31126 ?

TowerHobbies.com | Axial 2-Speed Gear 48P 18T Low

[winnerone23]

Originally Posted by ra272

The yeti was clearly designed to have one, but I wonder if they have changed theyre mind...

Axial would Never design something and change their mind!
Remember the saaweeet xr10 cutting brake on the rear axle..

(Not picking on you, picking on axial)

[Jethrobodean]

Originally Posted by Brandon

We are working hard on the 2 speed parts and will release them once they are as durable as we can make them.

Yeti XL has been in development much longer than the 1/10th Yeti. Timing just worked out that way, definitely was not intentional and has not taken away from the 2 speed development



Correct, the AX3 radio is only a 2 channel. You will need a 3 channel TX/RX to operate the additional servo required when the 2 speed components are available.

Is it just too cold for that 2 speed R&D?

[JesterSpec]

they are still working on the cutting brake for the crawler thats discontinued

[ra272]

Originally Posted by Brandon

We are working hard on the 2 speed parts and will release them once they are as durable as we can .

Hi, any news about those parts ?

[Rxracer]

we are all still wondering if the 2 speed will ever come out........

[ra272]

Axial website said:
Optional two-speed transmission component sold separately.

They don't even say that it's not available yet...

[rob4607]

Is anyone else irritated that the 2 speed option (if it ever comes out) requires a 3 channel radio and all we got was a 2 channel? Unless I am missing some hidden trick or feature I thought you had to have another channel and servo to "switch" the gears? If so we should have been supplied with the correct radio to make this happen as it was marketed as 2 speed RTR, with the 2 speed parts to come later. Am I off???

[RichMTB01]

I'm not irritated, and honestly have no interest in adding a 2 speed to my two yetis. I have outfitted mine to have plenty of speed and torque


Sent from my iPhone using Tapatalk