**AX10/SCX10 Housing Splined Burly Tubes**

[Badd]

I got my narrow XR10 mod done using the burly tubes . I have used other tubes in the past and let me tell you these are the best hands down .
Badd's JYD build

[RcBro]

Glad you like them! Great build

[Badd]

Originally Posted by RcBro

Glad you like them! Great build

Like I said the best tubes on the market . I think you should stock the narrow ones for the scale guys . I'm sure you would sell them .

[RcBro]

I'll get some cut down on the new batch. We have some brass burly tubes coming for those wanting to add weight as well!

[Badd]

Originally Posted by RcBro

I'll get some cut down on the new batch. We have some brass burly tubes coming for those wanting to add weight as well!

[2003EDGE]

Soooo....is there an option for brass cut down's?

[RcBro]

Yes sir!


Sent from my iPhone using Tapatalk

[2003EDGE]

Any idea as to the eta on the cut down brass tubes?

[RcBro]

Hope to have the tubes by the end of the week. I will need to cut them before they come online. Be just a week or so. Thanks!

[Badd]

Originally Posted by RcBro

Hope to have the tubes by the end of the week. I will need to cut them before they come online. Be just a week or so. Thanks!

I will be ordering another set .

[hatefulboy]

RCBRO I sent you a PM a week ago with no reply. Can you check your PM box. Thanks

[RcBro]

Sorry I miss this one, you got a pm back.


Sent from my iPhone using Tapatalk

[Meatwad]

Sent an email on the site about brass tubes today, got my answer here.. soon basically. Looking forward to a pair of brass full xr width tubes

[Natedog]

Originally Posted by RcBro

I've made it my personal mission to bring the RCC community a bolt in splined burly tube option for all our comp and scaler needs. Below is something I have been working on.



No axle is complete without our Burly splined tube set. Our Burly tubes have several benefits that you just simply can’t be without.

The plastic housings are not known to be the strongest on the market, add a good steering servo and a little bit of time, you’ll quickly find yourself snapping housings left and right. No longer will this be an issue, no mods needed our tubes are 7075 and slide in between the case halves making them the strongest and only no mod needed tube on the market.

Our tubes extend your stock axle to accommodate stock XR10 Axial Universals which are known for up to 70* of steering when modded. Splined for easy C-hub clocking our tubes are meant for Vanquish splined C Hubs. (Other brands can be used, but fitment may vary)

Each tube features a alignment dimple allowing you to lock in your tubes for perfectly indexed spline alignment ensuring your alignment is spot on. A locking collar slides over the burly tube with a tight fit on your axle housing. Two set screws hold this piece in place with 1 set screw locking into the alignment dimple.



This collar comes black anodized to achieve that one piece look. Those wanting to get there first sets ASAP have the option to order without anodizing.

Cost is $55.00 which includes 2 Burly Tubes and 2 collars.

Pre-order your set today!
RCBros » Burly Splined Tubes

This is a great idea, but seems like steel would be better option because it's heavy, cheap and strong. I'd also extend the tubes another couple millimeters inward at the diff to add a little more weight and strength.

[RcBro]

We do offer brass coming soon for the weight guys. We opted for aluminum as it's easier for most to tap, yet still has amazing strength.


Sent from my iPhone using Tapatalk

[hatefulboy]

PM back at you!

[Meatwad]

Any updates on the brass tubes?

[RcBro]

Aluminum and brass burly tubes and cut burly tubes are in the polisher. Will get them online soon!


Sent from my iPhone using Tapatalk

[Meatwad]

Take my money!

[LIKES2CRAWL]

Well shoot, I just ordered a set of regular tubes cause I didn't know you was offering stock width ones. I guess I can install them and if there to wide for my scaler I can cut them down myself...looking forward to running these.