Pics of your latest purchase

[Brake Weight]

Originally Posted by HyperMark

Factory head unit(Holden-iQ). But I do have my 1000 watt, 5 channel amp and 12" sub from my last car to fit as well.

Very often the ohms will be different than aftermarket gear. I’ve had a little something bumping in my vehicles since my very first one in the early ‘90s. I don’t think I’ll ever get past that.

[Panther6834]

Originally Posted by BJoe

No problem, thought that could make a neat rig on a brushed Slash 4x4 based truck if built out like my Telluride

Here's the best "update" I can come up with, mostly because the design of the LM003 fenders makes it near-impossible to 100% accurately determine the wheelbase (see photos). The Traxxas Slash 4x4 has a 12.75" (324mm) wheelbase, and the Rustler 4x4 has an 11.62" (295mm) wheelbase.The LM002 has an even shorter wheelbase. The best I've been able to determine, the LM002 body has a wheelbase somewhere in the range of 280-285mm.


~ More peace, love, and kindness would make the world a much better place

[BJoe]

Originally Posted by Panther6834

Here's the best "update" I can come up with, mostly because the design of the LM003 fenders makes it near-impossible to 100% accurately determine the wheelbase (see photos). The Traxxas Slash 4x4 has a 12.75" (324mm) wheelbase, and the Rustler 4x4 has an 11.62" (295mm) wheelbase.The LM002 has an even shorter wheelbase. The best I've been able to determine, the LM002 body has a wheelbase somewhere in the range of 280-285mm.


~ More peace, love, and kindness would make the world a much better place

Hmmmm.......gonna have to measure the wheelbase of my Telluride then......

Thanks!

[ScaleLifeNewbie]

Just picked up these Proline 3.85” swampers with some Gearhead glue on(what Is that?) aluminum wheels. Super soft tires, pretty sure they’re Predators. Gonna de glue them, clean up the beads and re glue them.




_________________
https://www.instagram.com/island_crawlaz/

SCX10ii Yota
TRX-4 Bronco

[Fricker08]

Original proline ‘73 Bronco body with cgr cage that’s been discontinued for some time now, new in the package and unpainted.
Only seen 3 of these come up for sale in the last few years and they’ve all been painted. Well I paid for this one but man it’s worth it





Sent from my iPhone using Tapatalk

[Gula]

Originally Posted by Fricker08

Well I paid for this one but man it’s worth it

What'd you pay, 3 digits ?

[Fricker08]

Originally Posted by Gula

What'd you pay, 3 digits ?

Yea man… seller was asking $200, I offered $180 and he accepted


Sent from my iPhone using Tapatalk

[B-MOW71]

The hard to get TGH 2.Low E.B.R Edition has finally arrived! What a beauty it is! Now to decide which build to put it in!

[Brake Weight]

Originally Posted by B-MOW71

The hard to get TGH 2.Low E.B.R Edition has finally arrived! What a beauty it is! Now to decide which build to put it in!

Attachment 395302

Attachment 395303

Nicey nice.

[AnimalHippie]

This place rocks! .09 a piece shipped. Perfect for SLW hubs. 100 for $8.95


Sent from my iPhone using Tapatalk

[DRED805]

How much am I going to regret ordering these!?

[Panther6834]

My one and only (ok, technically, two, as I bought two of the same item) "Star Wars Day" purchase for 2021 got delivered today. It's the junk of junk that made the.....yea, you know the rest.


~ More peace, love, and kindness would make the world a much better place

[HugoBiermann]

Originally Posted by DRED805

How much am I going to regret ordering these!?

I’ve got a pervious version of these on my unimog an they have been fine. Build is good. I only run 2s though. And I don’t beat on my rigs either. They are wider than stock 10.2 axles too


Sent from my iPhone using Tapatalk

[DRED805]

Originally Posted by HugoBiermann

I’ve got a pervious version of these on my unimog an they have been fine. Build is good. I only run 2s though. And I don’t beat on my rigs either. They are wider than stock 10.2 axles too


Sent from my iPhone using Tapatalk

Awesome, thanks for the info!

[HyperMark]

Just ordered a moulded fibreglass sub box for my VE Commodore.

[hpiguy]

I'm generally not a two-stage trigger guy, but I put one of these in my 12.5" build and really came to like it. So I slightly overpaid for another for my 10.5" build. (they're back ordered two to three months out)

Larue MBT 2S

[Deerhurst]

Originally Posted by hpiguy

I'm generally not a two-stage trigger guy, but I put one of these in my 12.5" build and really came to like it. So I slightly overpaid for another for my 10.5" build. (they're back ordered two to three months out)

Larue MBT 2S

Mmm. That's a quality go bang part! I'm also not a 2 stage fan. I've grown very attached to my POF 4.5lb drop ins.

Sent from my Phone 2 using Tapatalk

[B-MOW71]

TGH Creeper-T delivered! I'll be flipping the gears and installing it in my V1-C1 build.

[hpiguy]

Originally Posted by Deerhurst

Mmm. That's a quality go bang part! I'm also not a 2 stage fan. I've grown very attached to my POF 4.5lb drop ins.

Sent from my Phone 2 using Tapatalk

I have a couple of the cassette trigger drop-in units also. My 18" SPR has a Timney Calvin Elite that breaks around 1.5lbs, it's spoiled me for damn near anything else for long range work.

[mikemcE]

I’m not going any faster, BUT damn I’m looking good!




Hang up and Drive