Pics of your latest purchase

[Fricker08]

Walked into my local hobbytown at lunch to buy a $5 pinion gear. Walked out after work with this… smh

[hpiguy]

After a lot of research, I picked up an Anker Soundcore Motion Boom Bluetooth speaker. I've been very happy with my JBL Flip 4, but at the beach you have to run it so loud that battery life is only around 4 hours. This should solve that problem and the JBL will go in my work go bag.

[Levi]

Originally Posted by OnTheTrail

Both my brother and I have the same "Baby Q" in our campers. Great little grill. As a suggestion, pick up one of these. With this you can refill the small expensive cylinders with a larger 20# tank. Haven't bought the small cylinders in years. Just keep refilling them.

https://www.harborfreight.com/propan...lve-63607.html

Good to know I'll have to check it out.

[GA Dawg]

1975 Fender Vibro Champ

[ScaleLifeNewbie]

https://postimg.cc/JyBs3HpX

1986 Honda XR250R. Picked it up for $350. Needs a little work, but I've been wanting to ride for ever now!

[MrCataract]

Going to put the hobbywing fusion 1800kv in my Trail Finder 2.

Sent from my SM-N981U using Tapatalk

[Greatscott]

Starting to add to my 1/14 scale equipment. Bought this guy last weekend for a very good price...

Untitled by Scott O, on Flickr

[TheSparctan]

Originally Posted by Greatscott

Starting to add to my 1/14 scale equipment. Bought this guy last weekend for a very good price...

Untitled by Scott O, on Flickr

Can it actually dig……? o.O

[Timmahh]

Originally Posted by ga dawg

1975 fender vibro champ

winner winner chicken dinner

[Timmahh]

Didn't buy, but made a trade for my Class 1 rig, for a Ryft and Stampede, 2 new 4s and a traxxas 2s pack. Then I spent about 500 in stuff for the Ryft. smdh.

stuff will be showing up next week. Have a few things already, diffs, lockers, and a few things to get this one mobile again. Diffs were toasted.

[Greatscott]

Originally Posted by TheSparctan

Can it actually dig……? o.O

It can. But, it could do better. Out of the box it suffers from a bad case of clod-stall, the front loses traction when the bucket digs in, the back wheels stop, and the front wheels spin. I am going to crack tis guy open and give the electronics an upgrade. Most likely I will go with a couple of HW1060s to push the motors. I am also going to upgrade the lighting controls, and likely ditch the sound system.

[TheSparctan]

Originally Posted by Greatscott

It can. But, it could do better. Out of the box it suffers from a bad case of clod-stall, the front loses traction when the bucket digs in, the back wheels stop, and the front wheels spin. I am going to crack tis guy open and give the electronics an upgrade. Most likely I will go with a couple of HW1060s to push the motors. I am also going to upgrade the lighting controls, and likely ditch the sound system.

That’s amazing… and yea, I would ditch the sound system.. lol

[B-MOW71]

Picked up a set of Boomracing Probuild 1.9 beadlock wheels for my V1-C1 build. Super nice wheels!

Also finally found the TGH spur locker in stock and orderd a couple of them. They'll be going on my TGH FMM and 2.Low trans.

[Timmahh]

Few more things for the Ryft.
2speed,
Servo Saver pack for the 2 speed (didn't know one comes in the 2 speed)
Yeah Racing 25T servo saver riser for a mini servo
Reefs Micro 99 for shift duty.
Also a new set of Stock Trailing arms to add to the Axial Trailing Arm plate that showed up last Friday.
And a couple of packs of Fast Eddy bearings for the Front Axle and a full set for the Ryft.

Also picked up an Ebay deal for this set of Prline USA Beadlock rims, Pitbull Rock Beast II Tires, unsure of compound or what foams are in them for a good price.

They were used, but you can't really tell other than a little dirt around the hex area.







This stuff arrived last Friday for the Ryft.

[MrCataract]

Rc4wd Kangaroo Front Bumper

Sent from my SM-N981U using Tapatalk

[Timmahh]

More shit for the Ryft

[hpiguy]

I've wanted this one for a while now. Tikka T1X MTR 20" .22lr. Also picked up the more vertical grip, a T3X recoil pad to match the LOP of my T3X, a Mountain Tactical trigger spring, and an Area 419 30MOA rail for stretching it's legs. We shoot our .22s more than anything, so I'm really hoping everything is here by next weekend.

[Timmahh]

Wheels for the Ryft, 2speed for it, 99Micro and Horn modded for 2 speed duty.
Have a Treal Sway bar on the way along with a Treal 25t Servo saver.
picked up a ServoAF Drag link servo saver and KNK HD brass horn which is currently installed on it.









Pitbulls on Proline USA Beadlock rims also




Still waiting for my RX4/2300kv HD combo to get here. Looking maybe like tomorrow. Maybe. smh

[hpiguy]

Well, I wasn't intending to buy a new scope, but I don't have anything decent that wouldn't put me out of base class in NRL22 (I'm going to try and make at least one match this year) according to MSRP. So, after some digging, I picked up...


A Cabela's Covenant 7 3-21x50mm scope (34mm tube, FFP, and the big one is it has a zero stop), was on sale for a helluva deal too.



A set of Arken Halo 34mm rings




A Wheeler lapping kit for 34mm rings



And finally, tired of lugging around an 80lbs shooting bench, a Caldwell Stable Table Lite

[Zukiiholic]

Ordered a bunch of parts straight from WPL RC.
Free shipping on parts so I stocked up.
10days shipping.
No more of this Ebay/Amazon 3 months waiting and then Nothing.
2 speed trans, Metal axles, Metal drive shafts, and more for my D12 and B14.