GT3b compatible LED controller

[atf300]

i've searched high and low , but i cant seem to find which LED controllers are compatible with the flysky .

i know the 3racing one isnt, also r2 hobbies supposedly not .

i read that the v2 of the GT power is , and some people say its not .

also , since the hacked firmware reduces latency a bit , would that help it ?

[heyok]

What sort of LED controller are you after?

These are some that I make:


Remote Switch For LED Lighting

Dual RC Switch for LED lighting or ?

RC Lighting Control Using External Power

4 Position Dual RC Switch for LEDs

4 Position Dual Powered Dual RC Switch

Park Lights, Head Lights switch


Just the Brakes - Brake Light output only


Brake, Reverse and Driving Light Controller

3Rd Brake Light Controller (and more)

Brake Light Controller with Head Light Output


Turn Signal Controller

[atf300]

something i can hook up about front lights two sets, two sets of rears and an on/off switch for a pair of rock lights. i was looking at you brake reverse and driving controller.

[heyok]

Originally Posted by atf300

something i can hook up about front lights two sets, two sets of rears and an on/off switch for a pair of rock lights. i was looking at you brake reverse and driving controller.

The brake reverse and driving controller is nice because everything is automatic. The reverse and brake lights come on at the right times. Some people like the lights that come on when you go forward too.

Maybe you want to dedicate a channel to turn on a set of lights like your rock lights etc. That is when you could use something from this list if you like:


Remote Switch For LED Lighting

Dual RC Switch for LED lighting or ?

RC Lighting Control Using External Power

4 Position Dual RC Switch for LEDs

4 Position Dual Powered Dual RC Switch

Park Lights, Head Lights switch

[atf300]

i have a hacked gt3b so plenty of channels available for turning on off