02-19-2008, 05:48 PM | #121 |
Rock Crawler Join Date: Sep 2004 Location: South Orange County
Posts: 589
| |
Sponsored Links | |
02-22-2008, 05:11 PM | #122 |
Newbie Join Date: Feb 2008 Location: Duluth
Posts: 1
| custom strait axle duratrax diffs |
02-27-2008, 08:30 PM | #123 |
Newbie Join Date: Feb 2008 Location: Johns Is.
Posts: 30
|
here's my only junk right now...cheap a$$ new bright. I built the chassis,Chuck |
03-17-2008, 11:23 PM | #124 |
Rock Crawler Join Date: May 2007 Location: lacey
Posts: 833
|
Axial AX10 Integy CF Chassis Tcs four link mounts, servo front, boomerang rear. losi rock claws hpi bug body TCS knuckle packs novak rooster crawler Integy 45t V11 towerpro 945 steering servo stock gearing Front dig inboard mounted lower links 4oz of lead in each front wheel stock shocks set up in droop fashion DX3R |
03-21-2008, 10:29 PM | #125 |
Pebble Pounder Join Date: Jan 2008 Location: Mission B.C. Canada
Posts: 156
|
Truck Base :Scorpion ESC:Goat Motor(s):Goat 18.5 Servo(s):Hitec 645mg (7955 tg soon) Trans:stock axial Axles:axial with rcp straight axle, alum c's and knuckles Tires:Imex Swamp Dawgs WB:12.5" Overall Width:10.25" Diff clearance:1.5" Center Chassis clearance:2.5" Overall height:9.5" Remote operated lights, full interior, custom made folding side mirrors, 427 Corvette engine. Scorpion K10 comp/scale |
03-21-2008, 11:33 PM | #126 |
Rock Crawler Join Date: Jan 2008 Location: Jonesboro, Arkansas
Posts: 879
|
Here are some of my rides, with more to come. This is my comp 2.2 AX10 INTEGY 55T NOVAK ROOSTER CRAWLER ESC CUSTOM SUSPENSION AND CHASSIS WORK Next is my trail rig AX10 INTEGY 45T ROOSTER ESC CUSTOM CHASSIS AND SUSPENSION WORK This is my back up rig. She is brand new never driven. AX10 INTEGY 55T ROSTER ESC ORDERED STOCK EVERYTHING This is my 1.9 scaler/tow rig Tamiya F-350 High Lift Stock Steel Can Motor Rooster Crawler ESC RC4WD Bead Locks 1.9 Mud Slingers Here is a sneak peak at my up and coming trail rig project And still to come this month, Custom High Lift and PTI Goliath |
03-27-2008, 07:17 PM | #127 |
Newbie Join Date: Feb 2008 Location: Da Bronx
Posts: 11
| My Hustler
I love this sport Truck Base : Hustler ESC: Mambas Radio: DX6i Receiver:AR6200 w/ satellite Battery: Flight Power 2500 11.1v w/ Cc BEC Motor(s): 2x BM16 Servo(s): 2x Hitech 5955TG Trans: S.Clod w/ Integy gears Axles: Thundertech CVD, JP Knuckles. Losi Lst2 17mm hubs w/ lock nuts (Not shown Integy Axle tubes) Tires: Moab 40 XL WB: 17in |
04-06-2008, 01:52 AM | #128 |
Rock Crawler Join Date: Jan 2008 Location: Calgary Crawlers, Alberta, Canada
Posts: 617
|
Some of this will change as I can afford it..... Chassis - Unitek Spider (on EBay) - Made from ¼" lexan Suspension - Came with chassis - Solid aluminum 4 link - Shocks unknown, comparable to stock T-Maxx shocks Axles - Came with chassis - Machined from solid T6061 Aluminum - Hardened stainless steel axleshafts and internal gears Gearbox - Came with chassis - Case machined in T6061 Aluminum - Hardened stainless steel internal gears Driveshafts - Came with chassis - CV slider shafts made from Aluminum and hardened stainless steel Wheels / tires - Axial narrowed beadlocks / Losi rock claws ESC - Novak Rooster crawler edition Reciever - Traxxas 3 channel micro receiver Transmitter - Traxxas TQ 2 channel Motor - Novak high torque expert 55T Servo - Hitec HS5645MG, aluminum servo arm and custom draglink steering Wheelbase - 17" Ground clearance - 2 3/8" at lowest point (center of axle) - 3 3/4" at center of chassis Width - 16" outside of tires - 11" hex to hex Height - 8" to top of chassis without body mounts - 10" to top of body |
04-14-2008, 09:40 PM | #129 |
Newbie Join Date: Feb 2008 Location: Tamworth
Posts: 4
| |
04-16-2008, 05:13 PM | #130 |
Newbie Join Date: Mar 2008 Location: clemmons
Posts: 23
| My AX-10 My first crawler!!! It was a ton of fun to build. It is still all stock I am trying to decide between a tuber and the helios body. I like the tuber better but I am concerned about ease of getting it off and on to exchange the battery. Any suggestions would be appreciated. Truck Base :Axial AX-10 Stage 1 ESCynamite Tazer 15t Motor(s):Integy 55t Servo(s):Hitec HS 645MG Trans:Stock Axles:Stock Tires:Stock WB:Stock Overall Width:7.1" Diff clearance:Stock Center Chassis clearance:Stock Overall height:5.25" Pictures |
04-18-2008, 08:28 PM | #131 |
Pebble Pounder Join Date: Feb 2008 Location: here
Posts: 109
|
This was my first attempt at building a crawler. SUCCESS!!!!! I love my truck!!! It climbs very well. The frame and links are all custom designed and built by me. A lot of trial and error went into this puppy but the outcome is EXCELLENT! Hey. . . for a newbie first timer I did alright. Truck Base : ClodBuster ESC: Novak Rooster Crawler Edition Motor(s): 2-75 turn Integy lathe motors Servo(s): 2-Hitech 645mg's Trans: No tranny. . . . . IT'S a CLOD!!!!!!! Axles: ClodBuster with full bearings Tires: Weighted Juggernaut tires on chrome bullet wheels WB: 19" Overall Width: 14" Diff clearance: 2-2 1/2" Center Chassis clearance: 7" Overall height: 13" Look at that clear blue Wyoming sky behind my truck! What an awesome pic. Thanks goes to Joel from our RC club for taking that pic. http://www.windycityrc.com/Home_Page.html Here's my AX10 at a comp just last Saturday. New body and tires. Here's my Super Crawler sporting a new body tires and wheels also at a comp last saturday. I thought I would add my newest crawler to list of crawlers. Basic AX10 with custom chassis. Last edited by dkur; 01-21-2009 at 09:12 PM. Reason: gave credit to photographer |
04-18-2008, 08:41 PM | #132 |
Pebble Pounder Join Date: Feb 2008 Location: here
Posts: 109
|
okay now. . . . . I couldn't stop at building one rock crawler. Can you?!?!?!?! Here is my second crawler. It is an AX10. You just can't beat an AX10. It is an awesome crawler and whole lotta fun to build to boot. I love the old Power Wagon body. I remember driving the old Power Wagon out on the ranch when I was a kid. What a hoot. Driving the crawler is pretty much the same, super slow and full of tenacious power!!! I modified the lower links to get more ground clearance and still protect the driveshafts. Other than that "Betty" is stock. Truck Base : AX10 ESC: Novak Rooster Crawler Edition Motor: 65 turn Integy lathe motor Servo(s): 2-traxxas 2055's. I have four wheel steering. Trans: Stock AX10 tranny Axles: Stock AX10 axles Tires: Stock Rock Lizards on stock beadlocks WB:12.5" Overall Width: 10.5" Diff clearance: 1 1/2" - 2" Center Chassis clearance: 4" Overall height: 10" Last edited by dkur; 04-19-2008 at 07:16 AM. |
04-19-2008, 01:16 AM | #133 |
Quarry Creeper Join Date: Jan 2008 Location: fair oaks nor-cal
Posts: 340
|
no pics right now dont have a cam but in about 3 days ill have some, im in the process of building a tube chassis Truck Base : axial ESC: rooster "not the crawler edition" Motor:integy 55t Servo:hi-tec 5955tg Trans: stock Axles:stock Tires: stock with about 4oz inn the front tires WB: 12.5" Overall Width:stock Diff clearance: stock Center Chassis clearance:3" clod with claw chassis will post pics when i get me camera not bad for 18$ huh? Last edited by breitenbach14; 04-25-2008 at 02:20 AM. |
04-22-2008, 09:02 PM | #134 |
Newbie Join Date: Apr 2008 Location: Cape Coral
Posts: 2
|
Truck Base : HPI wheely king ESC: Duratrax intellispeed 16t Motor(s): Integy 65T Servo(s): Scanner RC SSV-9764MG (x2) Trans: Stock WK locked slipper Axles: Stock WK with rcguy lockers Tires: Stock WK with cut lugs WB: 11'' Overall Width: 13 3/4'' Diff clearance: 1 1/2'' Center Chassis clearance: 2 3/4'' Overall height:11 1/4'' |
05-13-2008, 04:54 AM | #135 |
Rock Stacker Join Date: Apr 2008 Location: auburn
Posts: 71
|
this is my chassis based off ax10 rc4wd silver tranny 75t motor 4500 orion battery punisher drivelines this was my first build next one coming soon
|
05-25-2008, 12:53 AM | #136 |
Rock Stacker Join Date: Apr 2008 Location: Mtarfa
Posts: 90
|
Truck Base : Savage ESC: Evader ST Motor(s): Novak 55T Servo(s): Savage Trans: Savage Axles: Savage Tires: Maxx Muchlers WB: 17" Overall Width: 17" Diff clearance: 2.5" Center Chassis clearance: 3.5" Overall height:10" |
05-31-2008, 05:25 PM | #137 |
Newbie Join Date: Apr 2008 Location: buckeye
Posts: 2
| |
06-16-2008, 09:18 PM | #138 |
Pebble Pounder Join Date: May 2008 Location: Tyler, Texas
Posts: 119
|
mr. pink/rc4wd tuber
|
08-05-2008, 12:12 PM | #139 |
Newbie Join Date: Aug 2008 Location: jacksonville
Posts: 15
| heres a pic of my traxxas rustler if you want to see more go to non crawler rigs its under traxxas rustler |
08-22-2008, 05:32 PM | #140 |
Rock Crawler Join Date: Aug 2008 Location: Strugglin
Posts: 963
| my junk
55t soft springs blah blah blah |
Members' Rides - No talking - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What the #$%#$#@ are ya talking about? | Paul58 | Newbie General | 10 | 01-13-2013 04:40 PM |
Anybody know what im talking about?! | shadowrejects | Chit Chat | 2 | 05-14-2010 06:26 AM |
members 1.1 rides? | SaVaGe MaN SS | Chit Chat | 4 | 03-28-2008 02:48 PM |
| |