Go Back   RCCrawler Forums > RCCrawler General Tech > General Crawlers
Loading

Notices

Thread: Members' Rides - No talking

Reply
 
LinkBack Thread Tools Display Modes
Old 03-21-2007, 07:37 PM   #81
RCC Addict
 
Join Date: Mar 2007
Location: St. Louis (High Ridge)
Posts: 1,279
Default

Truck Base :Mini-LST

ESC: stock losi dual motor esc

Motor(s): two 141:1 gear reduction units
http://www.allelectronics.com/cgi-bi...OR,_USED_.html

Servo(s):futaba full size front and rear

Trans: front, direct from gearmotor to diff with driveshaft
rear, direct chain drive from gearmotor to diff input cup slotted for later this week right now it is front wheel drive

Axles:Stock rear lubricated with JB-Weld, 3 racing cranked down ball diff up front

Tires:Moab's with 3/8 inch foam and 2.2 wheels on 1:10 alloy adapters

WB:9.25in from axle to axle

Overall Width:10 in

Diff clearance:2 in

Center Chassis clearance:not much 2.5 in

Overall length:14 in




hairba11 is offline   Reply With Quote
Sponsored Links
Old 03-25-2007, 06:56 AM   #82
Newbie
 
Join Date: Mar 2006
Location: Salamanca
Posts: 14
Default

Truck Base : Extended ESP Rokzilla Chassis

ESC: Rebel 2

Motor(s): Integy 55t

Servo(s): Hitec 645mg

Trans: Clodbuster

Axles: Clodbuster, Trax gear Posi

Tires: Imex Jumbo Pullers

WB: 18"

Overall Width: 16"

Diff clearance: 2"

Center Chassis clearance: 3 3/4"

Overall height: 11 1/4"



Rokzilla is offline   Reply With Quote
Old 03-25-2007, 08:24 AM   #83
I wanna be Dave
 
Join Date: Dec 2005
Location: Orlando
Posts: 7,420
Exclamation

Truck Base :Tamiya Bruiser

ESC:Novak Super Duty

Motor(s):550 can

Servo(s):Hitec/JR

Trans:Modified EMaxx

Axles:TLT

Tires:RC4WD BL's Moabs
Attached Images
  
ColquittCustom405 is offline   Reply With Quote
Old 03-26-2007, 02:17 PM   #84
Rock Stacker
 
Join Date: Mar 2007
Location: on a lake
Posts: 80
Default

Newbright rockcrawler
imex red rock tires 2.2
stock suspension cups removed at top of shocks
custom painted by myself






ksully is offline   Reply With Quote
Old 03-28-2007, 07:44 AM   #85
Quarry Creeper
 
Join Date: Jan 2006
Location: SLC
Posts: 382
Default

Truck Base : Associated TC3\B4

ESC: Mamba 25

Motor(s): Axi 2212\26

Servo(s): JR

Trans: Spooled B4

Axles: Spooled TC3\ B4CVD's

Tires: Moab

WB: 12"

Overall Width: 11.5"

Diff clearance: 2"

Center Chassis clearance: 2.5"

Overall height: 6.5"
Attached Images
  
Mike Poulson is offline   Reply With Quote
Old 03-29-2007, 11:22 AM   #86
Rock Crawler
 
Join Date: Aug 2006
Location: sleeping in my truck!
Posts: 674
Default

pimping 2.2 "r2d2"
pimp slap chassis
tlt axles
r2tranny
super rooster/55t lathe
hitec 5955
spectrum rx/tx
ford f150

super pimping "c3po"
homemade torsion chassis
txt axles
e-maxx tranny/gd600/55t lathe
super rooster
hitec 5955 f/r
spectrum rx/tx
ford excursion



crawler hauler
homemade aluminum chassis
tlt axles
losi xx-t tranny
rebel 2/55t lathe
hitec 645
jr rx/tx
juggy leaf front/4 link rear
ford f650

RydeFab is offline   Reply With Quote
Old 04-11-2007, 12:29 PM   #87
Rock Crawler
 
Join Date: Feb 2007
Location: Crawling Around
Posts: 871
Default my e-savage crawler is done

the writeup and pics are here:
www.cardomain.com/ride/628266/13
Enjoy the slow life.
Generis is offline   Reply With Quote
Old 04-11-2007, 12:39 PM   #88
Rock Stacker
 
Join Date: Apr 2007
Location: coeur d alene
Posts: 55
Default

pti goliath
lrp waterproof runner
integy 55t lathe
hitec 645mg
goliath transmission and axles
imex swamp dogs
13.5 in wheelbase
all electronics fully waterproofed





toomessedup is offline   Reply With Quote
Old 04-13-2007, 10:38 PM   #89
Quarry Creeper
 
Join Date: Mar 2007
Location: Who Knows
Posts: 215
Default

Truck Base :NN

ESC:NOVACK

Motor(s):65T

Servo(s):HITECH 645MG

Trans:N/A

Axles:CLOD

Tires:IMEX

WB:16"

Overall Width:14"

Diff clearance:2.25

Center Chassis clearance:4.5

Overall height:10.5
Attached Images
 
CRAWLIN 4 FUN is offline   Reply With Quote
Old 04-30-2007, 02:31 PM   #90
RCC Addict
 
Join Date: Feb 2007
Location: sweden
Posts: 1,007
Default My Spider

Truck Base : Gmade Spider

ESC: Mamba max

Motor(s): Integy lathes 55t

Servo(s): 5645mg

Trans: None

Axles: Gmade

Tires: Imex red rocks on RC4WD 3,2" beadlocks.










2 movie clips..

http://s172.photobucket.com/albums/w...t=MOV03095.flv

http://s172.photobucket.com/albums/w...t=MOV03093.flv

Last edited by G-crawler; 04-30-2007 at 03:14 PM.
G-crawler is offline   Reply With Quote
Old 05-05-2007, 07:08 PM   #91
RCC Addict
 
Join Date: Mar 2007
Location: St. Louis (High Ridge)
Posts: 1,279
Default

Truck Base : Wheely King

ESC: stock

Motor(s): Integy 55t

Servo(s): dual TPro995mg with reverser

Trans: stock, 13/96 gearing

Axles: stock, JB-Weld lockers

Tires: Imex K'rock

WB: 14.5"

Overall Width: 12"

Diff clearance: 2.375"

Center Chassis clearance: 4.75"

Overall height: 10.75"


I'll update when i get the lid done.
hairba11 is offline   Reply With Quote
Old 05-10-2007, 07:37 PM   #92
Rock Crawler
 
Join Date: Apr 2007
Location: LaSalle
Posts: 819
Default my ride

Truck Base : nylint

ESC:novak xrs

Motor(s):mini-t stock

Servo(s):water proof traxxas 2055

Trans:none

Axles:nylint

Tires:nylint cut and weighted


Mikekx65 is offline   Reply With Quote
Old 05-19-2007, 05:11 PM   #93
Pebble Pounder
 
Join Date: Jan 2007
Location: drunken Duncan B.C
Posts: 189
Default

Truck Base : 2wd nylint

ESC: board

Servo: stock

Motor(s): silver 280 can

Trans: stock

Axles: stock

Tires:front stock, rear stock w/studs

to bad i don't have a body.. o well got a wk 4x4 for scaler on order

cabsover78 is offline   Reply With Quote
Old 05-24-2007, 01:47 PM   #94
Pebble Pounder
 
Join Date: May 2007
Location: "In a van, down by the river!"
Posts: 109
Default Wanna see my new rig? Here it is.

My very first RC crawler (not my last!).
krikir is offline   Reply With Quote
Old 05-26-2007, 03:12 PM   #95
RCC Addict
 
Join Date: Aug 2006
Location: ****, SL,UT
Posts: 1,610
Default

my ride
here is my super vs wk
specs:
motor:35t
wb:~14.5
radio:3 ch coming
ws(wheel steer):4ws(not shown)
body:stock soon will change to what i have no clu
wheels:stock 2.2
tires:stock chevrons, soon to be all maxx mashers
chassis: matalic red vs
~pics~



Kranberry is offline   Reply With Quote
Old 06-05-2007, 01:39 PM   #96
mjh
Quarry Creeper
 
Join Date: Feb 2006
Location: Surrey B.C Canada
Posts: 218
Default

Truck Base :CLOD
ESC:TEKIN2
Motor(s):55T LATHES..8t pinions
Servo(s):645'S
Axles:CLOD..locked
Tires:RED ROCKS...ON MAXIMIZER B/L
WB:17 IN.
Overall Width:14 IN.
Diff clearance:2 1/2IN.
Center Chassis clearance:4 3/4 IN.
Overall height:11 IN.
Body:toyota hard body
Shocks:RC4WD internals








Last edited by mjh; 06-05-2007 at 01:51 PM.
mjh is offline   Reply With Quote
Old 06-12-2007, 03:18 PM   #97
Pebble Pounder
 
Join Date: May 2007
Location: "In a van, down by the river!"
Posts: 109
Default TLT-1 Bender SW3 Crawler



...and now, after the conversion to the new Bender SW3:









The custom built Delrin® links by Finish-Line-RC (www.finish-line-rc.com) of Denver, CO work perfectly:



Truck Base : Tamiya TLT-1 (Bender SW3 Chassis)

ESC: Castle Creations Mamba MAX

Motor(s): Integy Lathe 55

Servo(s): HiTEC HS-5645MG (x2)

Trans: Stampede Locked

Axles: TLT-1 Locked (bearings)

Tires: Proline® Moab 2.2 on trimmed Stampede Chrome Rims, lead in front, star cut foams

WB: 12.5"

Overall Width:10.25"

Diff clearance:1.5"

Center Chassis clearance:3.5"

Overall height: 8"

Last edited by krikir; 06-14-2007 at 09:23 AM.
krikir is offline   Reply With Quote
Old 06-15-2007, 03:46 PM   #98
Pebble Pounder
 
Join Date: Apr 2005
Location: World -> Europe -> Italy -> Umbria -> Perugia -> Assisi -> Petrignano di Assisi
Posts: 174
Default

Here is mine:








Build thread here ---> Project AVIO-TLT Start...PICS!

Gallery here ---> http://www.putfile.com/garrett85/images/117939
Garrett is offline   Reply With Quote
Old 06-28-2007, 11:38 PM   #99
Newbie
 
Join Date: May 2007
Location: Van City
Posts: 30
Default

Turf Kreeper

Truck Base : HPI Wheely King
ESC: Traxxas XL-5
Motor: Integy 55T Matrix
Servo: Hi Tec 645
Trans: Stock WK, HPI 96 tooth spur gear, 16 tooth pinion
Axles: Stock WK
Tires: Moab 2.2 on Axial Beadlocks
WB: 13.5"
Overall Width: 11"
Diff clearance: 1.5"
Center Chassis clearance: 2.75"
Overall height: 10"


Last edited by BCV6SVT; 07-11-2007 at 04:12 PM.
BCV6SVT is offline   Reply With Quote
Old 07-04-2007, 09:43 PM   #100
I joined the Band!
 
Join Date: Nov 2006
Location: Sierra Vista, Arizona
Posts: 55
Default

Here is mine--

Truck Base : NN chassis from The Crawler Store

ESC: Tekin Rebel 2

Motor(s): Integy 55 turn lathe motors

Servo(s): Hitec HS645MG's

Trans: Clod

Axles: Clod

Tires: BFT (from the MGT) on stock MGT wheels

WB: 16.25''

Overall Width: 15''

Diff clearance: 2.25''

Center Chassis clearance: 5''

Overall height: About 9.75'' with body

Here is a pic, and if you get RC Driver, in the August 2007 issue on page 129 (above 2nd page of the A123 battery add), you will see this picture
(the crawler is the one in the middle btw ) --
Crawlerdude75 is offline   Reply With Quote
Reply



Members' Rides - No talking - Similar Threads
Thread Thread Starter Forum Replies Last Post
What the #$%#$#@ are ya talking about? Paul58 Newbie General 10 01-13-2013 04:40 PM
Anybody know what im talking about?! shadowrejects Chit Chat 2 05-14-2010 06:26 AM
members 1.1 rides? SaVaGe MaN SS Chit Chat 4 03-28-2008 02:48 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com