RCCrawler Forums

yotachump · 12-23-2007, 01:59 PM

13/43 #MA050 this is a replacement for the mad force.

Bart bender · 12-24-2007, 09:18 AM

Yes it is. Added to the first post. Thanks!

yotachump · 12-29-2007, 12:04 PM

Carbon fiber chassis
MAW051

blue-beard · 01-03-2008, 03:17 PM

Quote:

Originally Posted by bretkissick

Was just looking at the Maximizer Locker #2356. Does the CEN LOCKER (ceg-gs013) mentioned earlier also work well, direct fit?

Thanks

Yes the CEN locker is a direct fit. There is a little play when you slide it in the diff case but it works fine. Other than jb welding you can't beat these for the price.

yotachump · 01-06-2008, 09:41 AM

COMPLETE TWIN TRANNY

MA101(UNDER PLATE)$8.00
MA102(MOTOR MOUNT)$7.00
MA103(MAIN GEAR SHAFT)$4.00
MA104(MAIN GEAR)$5.00
MA105(SLIPPER SHEET)$3.00
MA106(SLIPPER PLATE)$5.00
MA107(SPRING COLOR)$3.00
MA108(CENTER BULK)$6.00
MA017(DRIVE CHAIN)$11.00
MA016(SPROCKET SHAFT)$5.00
MA010(SPROCKET 11T)$7.00
MA008(SPUR GEAR)$9.00
BRG005(SHIELD BEARING(8X16X5)2PCS)$10.00
BRG006(SHIELD BEARING(6X12X4)2PCS)$11.00
BS52(2.6MM X 16 SHAFT)$3.00
FM352(CLUTCH SPRING)$4.00
(OPTIONAL)MA113(UNDER PLATE MOUNTING KIT)$8.00
___________________________________________
COMPLETE TWIN TRANNY $101.00
OPTIONAL MOUNTING KIT +8.00
___________________________________________
$109.00

All you need is the screws to assemble it, and 1 4mm flange locknut.

Reflection · 01-06-2008, 10:42 AM

SWEET!,Thanks Chump.

Bart bender · 01-06-2008, 02:31 PM

I got this in post 62. Just with out dollar amounts.

yotachump · 01-06-2008, 04:10 PM

Quote:

Originally Posted by Bart bender

I got this in post 62. Just with out dollar amounts.

i was just making things easy.

Bart bender · 01-07-2008, 04:59 PM

That's cool just adding the link to the breakdown. Anyone have a complete axle part number, or is there even one?

ThinkTank · 01-09-2008, 09:12 PM

I was browsing on Kyosho's website and found that the newer
ST-RR truggy has chromoly R&Ps. I wasn't able to find a part number(maybe RCP could get it) or any useful information.
I'll keep looking.

Bart bender · 01-19-2008, 04:58 PM

I found the 777 ST-RR uses 10t pinion IF102 and 43t ring IS101. I though I read this ST-RR was an Inferno but they don't list the Inferno on the parts breakdowns.

Well under a little more investigation this is the ST-RR. They list the light weight swing shafts that it has. Hope this helps.

zeroskater9111 · 01-21-2008, 12:09 AM

Will these parts work on a kyosho mad truck 1/10 scale?????

Reflection · 01-21-2008, 07:23 AM

Quote:

Originally Posted by zeroskater9111

Will these parts work on a kyosho mad truck 1/10 scale?????

These are upgrades for the Twin and Mad Force 1:8 scale monster trucks.

Bart bender · 01-22-2008, 06:04 PM

Updated CV shafts post 54 with measurements.

jsudar · 01-23-2008, 03:07 AM

Here is a link that shows how to make duratrax Thunder Quake universal axles work. It looks like a lot of work to me and the stubs are not as beefy, but it is another option I thought I'd throw out there.

http://www.kyoshomonster.com/madjedi/p2_cva.php

yotachump · 01-23-2008, 08:53 AM

Quote:

Originally Posted by jsudar

Here is a link that shows how to make duratrax Thunder Quake universal axles work. It looks like a lot of work to me and the stubs are not as beefy, but it is another option I thought I'd throw out there.

http://www.kyoshomonster.com/madjedi/p2_cva.php

Saw that a couple of months ago, the stubs are 6mm but I think I saw some other Duratrax CVD's in 8mm, I was thinking of buying them and making any length CVD I wanted

.But I Never liked Duracrap, oops, I mean duratrax.Also I don't like that these don't use a pin in the stub.

Bart bender · 01-23-2008, 02:58 PM

Thanks jsudar, I was thinking of adding links to mods from peoples builds. If this isn't an issue with anyone. Here's the revo shaft mod
http://bruteforce.freeownhost.com/cr...evoshafts.html

onespeeder · 02-09-2008, 12:24 AM

Found these while looking around. Aluminum link mounts by New Era.

http://www.neweramodels.com/item.cgi...=&part_id=8954

Bart bender · 02-09-2008, 08:18 AM

Holy cow. What a score. Very nice Onespeeder.

yotachump · 02-11-2008, 05:28 PM

Quote:

Originally Posted by ThinkTank

I was browsing on Kyosho's website and found that the newer
ST-RR truggy has chromoly R&Ps. I wasn't able to find a part number(maybe RCP could get it) or any useful information.
I'll keep looking.

Did anybody figure out if these work? I found the parts # for the R&P's they are 10/42 ratio.I was reading and it sounds like they are a direct replacement for the ST-R R&P.

This is what it says.

"These are the new harder versions of the ST-R bevel gears."
.

12-23-2007, 01:59 PM	#61
yotachump ghetto fabulous newbie Join Date: Sep 2007 Location: with your mom Posts: 2,526	13/43 #MA050 this is a replacement for the mad force. Attached Images Last edited by yotachump; 01-07-2008 at 03:18 PM.

01-06-2008, 09:41 AM	#65
yotachump ghetto fabulous newbie Join Date: Sep 2007 Location: with your mom Posts: 2,526	COMPLETE TWIN TRANNY MA101(UNDER PLATE)$8.00 MA102(MOTOR MOUNT)$7.00 MA103(MAIN GEAR SHAFT)$4.00 MA104(MAIN GEAR)$5.00 MA105(SLIPPER SHEET)$3.00 MA106(SLIPPER PLATE)$5.00 MA107(SPRING COLOR)$3.00 MA108(CENTER BULK)$6.00 MA017(DRIVE CHAIN)$11.00 MA016(SPROCKET SHAFT)$5.00 MA010(SPROCKET 11T)$7.00 MA008(SPUR GEAR)$9.00 BRG005(SHIELD BEARING(8X16X5)2PCS)$10.00 BRG006(SHIELD BEARING(6X12X4)2PCS)$11.00 BS52(2.6MM X 16 SHAFT)$3.00 FM352(CLUTCH SPRING)$4.00 (OPTIONAL)MA113(UNDER PLATE MOUNTING KIT)$8.00 ___________________________________________ COMPLETE TWIN TRANNY $101.00 OPTIONAL MOUNTING KIT +8.00 ___________________________________________ $109.00 All you need is the screws to assemble it, and 1 4mm flange locknut. Last edited by yotachump; 01-06-2008 at 09:45 AM.

01-09-2008, 09:12 PM	#70
ThinkTank Release your anger.. Join Date: Oct 2006 Location: North American Union Posts: 1,063	Perhaps another option for TF R&Ps I was browsing on Kyosho's website and found that the newer ST-RR truggy has chromoly R&Ps. I wasn't able to find a part number(maybe RCP could get it) or any useful information. I'll keep looking.

01-23-2008, 03:07 AM	#75
jsudar Rock Stacker Join Date: Jan 2006 Location: Pee Gee Posts: 56	Thunder Quake CV conversion Here is a link that shows how to make duratrax Thunder Quake universal axles work. It looks like a lot of work to me and the stubs are not as beefy, but it is another option I thought I'd throw out there. http://www.kyoshomonster.com/madjedi/p2_cva.php

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/kyosho-crawlers/58270-%2A%2A%2A-twin-force-upgrades-%2A%2A%2A.html
Posted By	For	Type	Date
kyosho madforce kruiser ve - Monster Trucks @ URC Forums	This thread	Refback	02-22-2013 06:29 AM

12-24-2007, 09:18 AM	#62
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Yes it is. Added to the first post. Thanks!

12-29-2007, 12:04 PM	#63
yotachump ghetto fabulous newbie Join Date: Sep 2007 Location: with your mom Posts: 2,526	Carbon fiber chassis MAW051

01-06-2008, 10:42 AM	#66
Reflection TEAM MODERATOR Join Date: May 2004 Location: Tennessee Posts: 10,855	SWEET!,Thanks Chump.

01-06-2008, 02:31 PM	#67
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	I got this in post 62. Just with out dollar amounts.

01-07-2008, 04:59 PM	#69
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	That's cool just adding the link to the breakdown. Anyone have a complete axle part number, or is there even one?

01-19-2008, 04:58 PM	#71
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	I found the 777 ST-RR uses 10t pinion IF102 and 43t ring IS101. I though I read this ST-RR was an Inferno but they don't list the Inferno on the parts breakdowns. Well under a little more investigation this is the ST-RR. They list the light weight swing shafts that it has. Hope this helps.

01-21-2008, 12:09 AM	#72
zeroskater9111 Newbie Join Date: Dec 2007 Location: Grande Cache Alberta Posts: 37	Will these parts work on a kyosho mad truck 1/10 scale?????

01-22-2008, 06:04 PM	#74
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Updated CV shafts post 54 with measurements.

01-23-2008, 02:58 PM	#77
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Thanks jsudar, I was thinking of adding links to mods from peoples builds. If this isn't an issue with anyone. Here's the revo shaft mod http://bruteforce.freeownhost.com/cr...evoshafts.html

02-09-2008, 12:24 AM	#78
onespeeder Quarry Creeper Join Date: Jul 2006 Location: PDX Posts: 426	Found these while looking around. Aluminum link mounts by New Era. http://www.neweramodels.com/item.cgi...=&part_id=8954

Sponsored Links

02-09-2008, 08:18 AM	#79
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Holy cow. What a score. Very nice Onespeeder.

RCCrawler Forums

Thread: *** Twin Force Upgrades ***

Thread: * Twin Force Upgrades *