02-21-2014, 08:29 AM | #61 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
Thanks mr juggler, all help is much appreciated, I'll see what I can do to with it this weekend..
|
Sponsored Links | |
02-23-2014, 06:14 PM | #62 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
I decided I'm gonna leave like it is and run it tomorrow, like you see in the last couple of pics.. I wanna see if it really effects my hard bashing and heavy crawling..lol.. I also wanna see if it binds under pressure.. As always pics to follow.. |
02-24-2014, 05:36 PM | #63 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
Here's a shot from the edge of my backyard track.. well the steering worked just great today on it first run.. No binding, it's smooth and it turns just fine in both directions..crawled my rock hill just fine too, it did all the lines it had in the past, except the steering worked better.. |
02-25-2014, 02:25 AM | #64 |
Rock Stacker Join Date: Jan 2014 Location: Belgium
Posts: 66
|
That's good news, and less work in perspective ;)
|
03-03-2014, 11:27 AM | #65 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
Damn been wanting to run my hammerz this week , and I got nothing but rain here in NorCal, guess I should be happy about that...
|
03-03-2014, 11:38 AM | #66 |
Rock Crawler Join Date: May 2013 Location: Rancho Cucamonga
Posts: 665
| Re: Rastas TwinHammerz
Same here. At least the track won't be dusty down here LOL. Ugh.
|
03-03-2014, 08:30 PM | #67 |
Quarry Creeper Join Date: Jan 2014 Location: Ukiah
Posts: 279
| Re: Rastas TwinHammerz
Rain here on the NorCal coast as well. Sux!
|
03-24-2014, 10:45 PM | #68 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
ok pulled the hammer outta its tote today, gonna take it for some mountian bashing.. maybe ill get some pics..
|
04-02-2014, 08:22 AM | #69 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
Well, I'm starting to go back through my hammerz this week, pulled the motor out and all the shocks off, gonna change it up yet again.. I had the tekin 8.5 in there gonna go to a 10.5 and gear the heck outta it.. I want more speed, the 8.5 was good just didn't have it geared high enough..plus I needed the 8.5 for my 4wd buggy.. And I have this 10.5 sitting around so.. Shocks I'm gonna rebuild em, in the rear, and thinking about those g made piggy backs for the front.. |
04-02-2014, 10:26 AM | #70 |
Pebble Pounder Join Date: Oct 2011 Location: Wichita
Posts: 158
| Re: Rastas TwinHammerz
I've got a set of the gmade 75mm on mine now but think I'm going to go with the kings instead. I'd sell them to you if you're interested.
|
04-04-2014, 07:50 AM | #71 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
75 mm is a little to low for me, I like the 90 mm limited down to about 84mm, but I'm thinking of using some associated big bore shocks up front..
|
04-04-2014, 10:00 PM | #72 |
Rock Crawler Join Date: Jul 2005 Location: Playing with toys with my son's
Posts: 616
| Re: Rastas TwinHammerz
I really recommend giving the G-made XD piggyback a shot. Good price for what you get and super tunable. I have been running them for awhile and really like them.
|
04-06-2014, 07:48 AM | #73 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
What length gmades you running?
|
04-06-2014, 12:36 PM | #74 |
Rock Crawler Join Date: Jul 2005 Location: Playing with toys with my son's
Posts: 616
| Re: Rastas TwinHammerz
85mm front and 103mm rear
|
04-06-2014, 04:29 PM | #75 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz im gonna givem a try.. thanks sr irie.. |
05-11-2014, 10:31 PM | #76 |
Newbie Join Date: Mar 2014 Location: Riverside
Posts: 15
| Re: Rastas TwinHammerz
Hey Rastaman, can you take some pics of how your steering works? I have the BMR upright plate and am looking to upgrade the steering. I really like what you did with the steering servo on the plate but it seems like it would just bind, like the bell crank isnt made to move in that plane. I know I am missing something here but if you could clear it up for me I would really appreciate. TH is looking good though! Edit: Nevermind. After looking at how the bell crank pivots its makes sense. Last edited by Brzeal; 05-12-2014 at 08:38 PM. |
07-22-2014, 09:16 AM | #77 | |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz Quote:
so how do you all feel about that axial yeti coming out? | |
08-07-2014, 08:40 AM | #78 |
Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon
Posts: 487
| Re: Rastas TwinHammerz
In the time I have to wait for the yeti to be released I'm building a really nice U4rc track in my backyard, pics will soon come, and for anybody living in the northern sacramento valley area wants a private spot to have fun on and is 420 friendly.. P.m. Me for details..
|
08-07-2014, 10:36 AM | #79 |
Quarry Creeper Join Date: Dec 2013 Location: Atlanta
Posts: 200
| Re: Rastas TwinHammerz
damn, Nothern Sacremento is sooooo far from Atlanta, gotta love a 420 friendly course |
08-10-2014, 02:57 PM | #80 |
Quarry Creeper Join Date: Dec 2013 Location: pot noodle mines wales uk
Posts: 309
| Re: Rastas TwinHammerz
glad to see your still running the rig rastaman !! great job mate
|
| |