Margouillat AR60

[TotoRax]

Hi Stephan,

Thanks Stephan

[Shaunkjar]

I really like what you're building and testing here. Very cool stuff! If they go up for sale, where would I find them?

[Cirederf]

I share it this two vids from the last session we had before the World title .





Got the right song for you on the second one , i guess .

[Snatch]

Very cool videos

[TotoRax]

Hi,

I come to remove dust on this post

Since it appeared, I ogle on Axial AR44 axle. They are potentially very interesting. I finally could get one of them to me!!

Step ONE : Have a AR44 axle




First problems:

• They are too narrow (very too narrow)
• The fixing of the lower links are brought closer too much
• The fixing of the upper links will be complicated.

Thus step 2, printed parts … in coming

[JENS]

Originally Posted by TotoRax

Hi,

I come to remove dust on this post

Since it appeared, I ogle on Axial AR44 axle. They are potentially very interesting. I finally could get one of them to me!!

Step ONE : Have a AR44 axle




First problems:

• They are too narrow (very too narrow)
• The fixing of the lower links are brought closer too much
• The fixing of the upper links will be complicated.

Thus step 2, printed parts … in coming

Those problems can be solved







.

[TotoRax]

Originally Posted by JENS

Those problems can be solved

Yes and not. I wish use my system of very low weight placed in the wheel, but by inverting the wheel rim, we cannot use them

[TotoRax]

AR44 vs AR60 : 50mm (2 inch) of difference ...

[JENS]

Originally Posted by TotoRax

Yes and not. I wish use my system of very low weight placed in the wheel, but by inverting the wheel rim, we cannot use them

I see

I'm not used to running rear weights



.

[WHITE-TRASH]

Originally Posted by TotoRax

AR44 vs AR60 : 50mm (2 inch) of difference ...

Thank you for that picture it tells me a whole lot more about the ar44 than I knew.




It looks like the ar44 tubes could be cut and a pair of ar60 long side tubes drilled and glued over the ar44 housing would be a good solution, no? I've been very interested in the ar44 since it was released, hopefully it proves to be a good part even if all we use is the center section and gears.

[TotoRax]

Originally Posted by WHITE-TRASH

Thank you for that picture it tells me a whole lot more about the ar44 than I knew.

Also I was surprised as I received the axle and which I saw his small!!

For the moment here my (expensive) solution, because it is necessary to make machine shaft longer.



With weight system

[JENS]

Originally Posted by TotoRax

Also I was surprised as I received the axle and which I saw his small!!

For the moment here my (expensive) solution, because it is necessary to make machine shaft longer.



With weight system

Very nice !!

.

[WHITE-TRASH]

I like that a lot. I'd take an upper link mount for sure. That is a good solution, does it mount to the original upper link tabs, it looks that way.

[TotoRax]

In theory, not of modification for upper link, it is just necessary to put the higher support and to bolt it. In practice, it will be seen whether that functions

[WHITE-TRASH]

I'm sure it will work if the printed material is strong enough. You think way outside the box just like I do. But you have the tools to make your thoughts into reality, I do not.

[TotoRax]

Originally Posted by WHITE-TRASH

I'm sure it will work if the printed material is strong enough. You think way outside the box just like I do. But you have the tools to make your thoughts into reality, I do not.

Thanks

[TotoRax]

Hi,

ShapeWays parts arrive today!



Rear parts for Ar44 axle




I also print a plastik shaft to test all parts before made it in titanium.

[pat13]

Good job steph
3D printing is a good way for testing ideas
But sometimes it's expensive ��
I don't understand your Rear Axle shaft .......

[TotoRax]

Originally Posted by pat13

I don't understand your Rear Axle shaft .......

It is the same that on the ar44 shaft, it is just longer

[TotoRax]

Hi,

Assembly ok !!
Small corrections were made and definitive printing were launched. Axes titanium are also in the course of manufacturing (Thanks CREEPERBOB )