New Axial - Wraith

[EvilTwin v2]

Originally Posted by C*H*U*D

After the success of the SCX series (at least I think they are successful), I was expecting more companies to jump on board. It's almost like Losi with the MRC...can nobody else build a 1.9? Speaking of Losi, where are they? I'd love to see what Rubba and DelMonte could come up with.

If Losi had a rig like the SCX or Wraith, I'd buy it. There....I said it.

I'm not sure if Rubba is still with Losi, but Nabil and Del Monte are no longer with 'em.

Losi appears to be bailing on the crawler community.

Looks like Axial and RC4wd are the only manufacturers truly committed to the crawler community.

[tedo]

Originally Posted by renegade360

1st post, looking at dumping my 1/8 Electric buggy conversion and getting a wraith when it comes out. Seems like a good transition vehicle.

So How is it going to stack up with the Gmade R1 with similar motor combination. Just from a dimension comparison, it seems the Wraith is a little longer and slightly wider. I.E. could be more stable at higher speeds. Is the R1 made of better components like shocks, links, axles etc? Or is it similar and the Wraith is a better value?

I wanted to ask the same question too. The R1 was marketed for speed and crawling too, it's just not as popular.

I have a R1, and personally I love it. Put in a 27T or a 13.5 on 3s, the R1 is a blast. The portal axles are sweet. HOWEVER, the shocks, tires, stock linkages are not that great. I upgraded my linkage, got 110 rc4wd dual spring shocks, and sitting on 2.2 TSLs. The cockpit is cramped, so you have to be creative in your set-up.

IMHO, The R1 is cool because it's not your normal buggy. You don't see them around everyday, and with a little creativity, they can be extremely KOH scale that turn heads at the crawling spot.

I am still curious about the Wraith too, I am just not pre-ordering one.

[backtomyroots]

One question, when is the KIT being released ??

[prusik333]

this video reminds me of the Wraith
http://www.youtube.com/watch?v=qyQi4...layer_embedded

[98sierra]

Originally Posted by prusik333

this video reminds me of the Wraith
http://www.youtube.com/watch?v=qyQi4...layer_embedded

Thats just a little over heating is all, looks like cable hill at gray rock

[mykonian]

Originally Posted by highlucks

This has popped up on a local forum. Does any one know anything about it.

If this has been raised already please delete this thread.

Ahh GOD... One more AXIAL for my Pack!!!

[Lambo3244]

I wonder if this sucker is going to crawl well...may have to change the gear ratio out to slow it down maybe? I'm sure if they designed this rig after KOH rigs, it must be able to go fast and slow down for technical crawls.

[Agama]

Originally Posted by Lambo3244

I wonder if this sucker is going to crawl well...may have to change the gear ratio out to slow it down maybe? I'm sure if they designed this rig after KOH rigs, it must be able to go fast and slow down for technical crawls.

I think you will have to lower it down to do any crawling. My KOH rig, the hood sits maybe 1/4" above the tires and I'm at 11.2" width.

[vodka child]

Couple of preorder links for those folks in the UK:

http://www.apexmodels.com/gbu0-prodshow/AX90018.html

http://www.modelsport.co.uk/axial-wr...products/39646

369 and May 25th seem to be the thoughts re pricing and availability. Going to check in with my local hobby store see what they are saying.
Cheers

[Gimp]

Originally Posted by Lambo3244

I wonder if this sucker is going to crawl well...may have to change the gear ratio out to slow it down maybe? I'm sure if they designed this rig after KOH rigs, it must be able to go fast and slow down for technical crawls.

It comes with an 80T spur and 20T pinion. I only plan on crawling, so mine's getting an 87T spur and a 14T pinion, plus some OD/UD gears

[Tin Soldier]

I would love to see it have a 2 spd tranny. I love the idea of going fast to bash and then doing a bit of crawling as well. Speed was why I got rid of my scx-10. I like speed. :-)

[Jer]

Originally Posted by Tin Soldier

I would love to see it have a 2 spd tranny. I love the idea of going fast to bash and then doing a bit of crawling as well. Speed was why I got rid of my scx-10. I like speed. :-)

You'll have to to a trans swap, I imagine it's a matter of time before there is an aftermarket cradle for a summit trans.

[jimecm]

Is there a release date yet? Cant wait to pick one up

[team3six]

You know, there is more options then a Summit Craddle or Summit anything.
SDS Customs is in the process of making a tranny that can crawl and run like hell.
watch this
http://www.youtube.com/watch?v=LNm7_csUams

[dubAron]

Originally Posted by team3six

You know, there is more options then a Summit Craddle or Summit anything.
SDS Customs is in the process of making a tranny that can crawl and run like hell.
watch this
http://www.youtube.com/watch?v=LNm7_csUams

That's out of hand! i can't wait to get a Wraith and Hop it up

[Lambo3244]

Quick q, what is the plug type on the wraith?? Would this battery work?

http://www.ckrccrawlers.com/venom-li...se-p-2510.html

[It usually runs fine]

Originally Posted by Lambo3244

Quick q, what is the plug type on the wraith?? Would this battery work?

http://www.ckrccrawlers.com/venom-li...se-p-2510.html

It will be a tamiya male I would imagine.

[2JSC]

Do we even know how wide the axles are hex to hex?

[Charlie-III]

Originally Posted by jimecm

Is there a release date yet? Cant wait to pick one up

Our LHS (Zeppelin Hobbies in NJ) stated they are expecting thiers mid May. They have one on order, actually, it is either already sold (awaiting arrival) or they have to order a second one.......

[muddauber7]

Originally Posted by Jeepkid

There will be someone out there making a summit trans cradle as soon as they get one in front of them.

As soon as they hit, this is at the top of my to-do list!

"Cradle"...I love it! That one stuck, eh?