|
| LinkBack | Thread Tools | Display Modes |
11-09-2012, 09:39 AM | #41 |
Rock Stacker Join Date: Sep 2012 Location: here
Posts: 74
| Re: mamba max pro problem drives me crazy...
I think here may be your problem. The expo on the TX should be at 0% to start. If it is at 100%, you are looking at barely moving almost all the way to the end the throttle then a HUGE jump at the end. Try zeroing out all expo DR and reset your EPA to 100 foeward/reverse. re calibrate the ESC go from there. The rest is just precaution. I believe the EXPO is what is plaguing your set up. Last edited by dirtslow; 11-09-2012 at 09:41 AM. |
Sponsored Links | |
11-14-2012, 08:29 PM | #42 |
Pebble Pounder Join Date: Apr 2011 Location: Montreal
Posts: 122
| Re: mamba max pro problem drives me crazy...
Interesting... I have a similar issue while trying to use a MMP with a sensored motor. And it's driving me crazy too!!! Any conclusion/resolution vs your problem dude? |
11-15-2012, 07:34 AM | #43 |
Rock Stacker Join Date: Jan 2011 Location: Greece
Posts: 56
| Re: mamba max pro problem drives me crazy... Iam waiting to get a friend's motor to test.It's a 540 reedy sonic 21.5T.Probably next week cos he's on bussiness trip.I'll report the very first moment i test it...BTW, what sensored motor are you trying (company,turns...)?
|
11-17-2012, 11:07 AM | #44 |
Rock Stacker Join Date: Jan 2011 Location: Greece
Posts: 56
| Re: mamba max pro problem drives me crazy...
I tried today the reedy 21.5T sensored motor but i had the same issue with the MMP.I'll try in a week a hobbywing speedo from a friend. And the Odyssey continues...
|
11-17-2012, 11:32 AM | #45 |
Rock Crawler Join Date: Jun 2009 Location: summertown
Posts: 512
|
What brand of sensor wires are you using? Sent from my SAMSUNG-SGH-I747 using Tapatalk 2 |
11-17-2012, 04:55 PM | #46 |
Rock Stacker Join Date: Sep 2012 Location: here
Posts: 74
| Re: mamba max pro problem drives me crazy...
I still think it is the TX. OP mentioned the expo is set at 100%. At least confirm you have no expo set in the TX.
|
11-17-2012, 06:27 PM | #47 |
Rock Stacker Join Date: Nov 2005 Location: American Fork
Posts: 58
| Re: mamba max pro problem drives me crazy...
I have the same set up and was having similar issues, finally discovered that on the settings using the castle link I had forgotten to click the sensored motor box. clicked it, reset it, now it goes like a champ.
|
11-17-2012, 11:17 PM | #48 |
Rock Stacker Join Date: Jan 2011 Location: Greece
Posts: 56
| Re: mamba max pro problem drives me crazy... when i had the tekin 13.5T redline i used tekin's sensor wire (part# TT3811).Yesterday, with the reedy 21.5T sonic i used reedy's sensor wire(part#978 ).Both of them were brand-new.
|
11-17-2012, 11:21 PM | #49 |
Rock Stacker Join Date: Jan 2011 Location: Greece
Posts: 56
| Re: mamba max pro problem drives me crazy... |
11-17-2012, 11:27 PM | #50 |
Rock Stacker Join Date: Jan 2011 Location: Greece
Posts: 56
| Re: mamba max pro problem drives me crazy... |
11-17-2012, 11:35 PM | #51 |
Rock Crawler Join Date: Jun 2009 Location: summertown
Posts: 512
|
Change it to "smart sense". Have you tried turning off the lipo cutoff? Sent from my SAMSUNG-SGH-I747 using Tapatalk 2 |
11-17-2012, 11:58 PM | #52 |
I wanna be Dave Join Date: Feb 2007 Location: BFE, NV
Posts: 2,324
| Re: mamba max pro problem drives me crazy...
I just had to send a MMP back that died after one run in my SCT for no apparent reason. It does happen.
|
11-18-2012, 02:37 AM | #53 |
Rock Stacker Join Date: Jan 2011 Location: Greece
Posts: 56
| Re: mamba max pro problem drives me crazy... I have already tested it with the smart sense mode but the same issue occurs.I also turned off the li-po cutoff test it with a fully charged 2S (tested with a polymeter 8.4Volts) but still the same.
|
11-18-2012, 02:44 AM | #54 | |
Rock Stacker Join Date: Jan 2011 Location: Greece
Posts: 56
| Re: mamba max pro problem drives me crazy... Quote:
That's why i'll test a hobbywing combo borrowed from a friend and will report... | |
11-18-2012, 06:13 AM | #55 |
RCC Addict Join Date: Jul 2009 Location: reelsville
Posts: 1,871
| Re: mamba max pro problem drives me crazy...
I programmed a MMP and hooked it to a sensored Hobbyking 13.5 a couple weeks ago and it ran just as flawless as the Novak motors I've setup several times. Any chance we can get screenshots of your castlelink settings? I run high start power and no current limiting, a buddy had a VXL hooked to a MMP that was doing something similar and it was one of those settings. |
12-16-2012, 01:18 AM | #56 |
Rock Stacker Join Date: Jan 2011 Location: Greece
Posts: 56
| Re: mamba max pro problem drives me crazy...
At first, ΙAM SORRY for my long absence! I was waiting for a hobbywing ezrun 60A esc to borrow from a friend.I tried it yesterday with the reedy sonic 21.5T and with the tekin redline 13.5T,in sensored mode obviously,and it made ALL the difference in the world!!! I mean, the resolution of the speedo at low end speeds is soooooo smooth i couldn't believe in my eyes!!! The crawler king know overcomes any obstacle so easily and with precise control! Let me remind you,my truck's weight is 4kgrs exactly and runs on 2S only.On the other hand, the problem with this speedo is that it doesn't have a motor rotation clockwise or counter clockwise option, so reverse is not an option for the truck at all...! I even reversed the throttle channel of the futaba 3PM-X but the speedo didn't work.So, for testing purposes worked pretty damn well!!! Iam so impressed that iam about to choose between these two to buy: HOBBYWING TECHNOLOGY CO., LTD. OR HOBBYWING TECHNOLOGY CO., LTD. Both of them have the motor rotation option,are sensored,firmware update options are available,the lcd program box is a +1 and last but not least,the price is half of a let's say, tekin RX8. I imagine i could combine one of the above speedo's with the long anticipated tekin ROC412 motor with amazing results! (I hope it's not only my imagination...!) Any suggestions,preferably justified,or feedback with the above speedos are greatly appreciated!!!! |
01-26-2013, 01:59 AM | #57 |
Newbie Join Date: Jan 2011 Location: Vallejo
Posts: 2
| Re: mamba max pro problem drives me crazy...
I know it's not the same problem, but I'll describe my problem,and it's in a Custom Works Sprint car on Dirt Oval. Still dealing with the Mamba Max pro, been using with a cheap 23.00 NON sensored 17.5 "Bullistorm" from Hong-Kong motor, worked fine. Put a brand new Trinity Sensored D3.5 series 17.5 turn, that came with it's own cable. The car seemed to run fine testing out in the street FAST!! Went to the races, and ran about a pack (5400Mah Thunder power 2S 25C)through it in 3 different runs with tuning and charging in between. toward the end of this, I noticed pulling out of the corner to the strait, there was a low throttle "flat spot" like a car with a badly adjusted carb, a hesitation. we hooked it up to the castle card someone had, and put the cut-off on 3.5, it was on smart sense. and made sure it had some high power start setting. Re- calibrated it to the transmitter receiver(M 11 with spektrum module/3000 receiver). After that, it had NO throttle, just steering when powered. Got it to calibrate again, Still NO throttle. I had to run a different car. I really wanted to run that motor, but no time for robbing another car for a speed control.(had 2 cars there with the NOVAK club ESC/NOVAK 17.5) I tried un-plugging the sensor. Now it doesn't seem to calibrate anymore. It finishes with 2 blinking lights, Amber and green, NO power No motor movement at all. Any clues. I'm going to try putting the Lipo cutoff back to 3.0 per cell instead of 3.4 first.
Last edited by Franked; 01-26-2013 at 09:53 AM. |
01-26-2013, 02:13 AM | #58 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: mamba max pro problem drives me crazy...
have you tried running 0% punch control? im ruunning a mmp/tekin 13.5 w 13mm torque rotor and its butter smooth down low. |
01-26-2013, 06:06 AM | #59 |
Rock Crawler Join Date: Jun 2009 Location: summertown
Posts: 512
|
have you contacted castle?? Sent from my SAMSUNG-SGH-I747 Last edited by Twisted Nuts; 01-26-2013 at 06:09 AM. |
01-26-2013, 09:13 AM | #60 | |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Re: mamba max pro problem drives me crazy... Quote:
What packs are you running (cell count/voltage, mah & "C" rating?...nevermind, saw this on 2nd read.... 5400Mah Thunder power 2S 25C) Sounds like the flat spot is an overdraw on the packs. Did you use the same pack each time for testing? What pack connectors? If Tamiya, change them. If Deans or bullets, may be fine. Also check the ABS setting in the ESC as well as other settings. When calibrating the ESC to the RX, make sure TX throttle is set to 100% EPA (both ways), all trims to "0". Last edited by Charlie-III; 01-26-2013 at 09:16 AM. Reason: found info during re-read. | |
Tags |
mamba max pro, problem, question |
mamba max pro problem drives me crazy... - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mamba Max Pro - vs - Mamba Max Pro SCT | rctoyguy | Electronics | 1 | 06-08-2012 06:19 PM |
castle creations mamba max pro problem | mikedengineer | Electronics | 13 | 04-01-2012 07:16 AM |
Problem with Mamba max pro???? | Tuffguy | Electronics | 5 | 12-16-2010 09:44 PM |
Mamba max pro problem | cbtu0914 | Electronics | 4 | 06-12-2010 10:26 PM |
| |