Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Outrunner as an internal winch motor

Reply
 
LinkBack Thread Tools Display Modes
Old 05-17-2020, 05:25 PM   #1
I wanna be Dave
 
Join Date: Jul 2005
Location: North Idaho
Posts: 3,132
Default Outrunner as an internal winch motor

I am getting ready to revisit my TRX4 Tonka project, I want to refine what worked, and fix what didn't. One big driver of this project is being able to do something now that I couldn't back then, that is design and print my own parts. Many parts I used were modified off-the-shelf parts, which could have been done a lot better.

While the truck drove great just as an RC, two failures in this project were the booms and winches. The booms worked, but fine, slow control was lacking, then the booms moved it looked like a retarded bird. There are a couple of things I am going to change to make the control a lot better.

The winches never really worked, and I got to the point that I was tired of looking at it, so I shelved the project. Instead of going with a spool and motor connected by a spur and pinion, I thought about going with a 280 or 380 outrunner motor with a 3-d printed spool sleeve over the top of the rotating can. The biggest problem I can think of is heat, but these are going to be very light duty winches, so I can't really see that as a problem.

Can you think of a better option?

Untitled by Scott O, on Flickr

Untitled by Scott O, on Flickr

The build thread...

Shorty Project In The Works....
Greatscott is offline   Reply With Quote
Sponsored Links
Old 05-18-2020, 10:05 AM   #2
RCC Addict
 
Join Date: Feb 2016
Location: Princeton, North Carolina, USA
Posts: 1,497
Default Re: Outrunner as an internal winch motor

If it looks like the setup you did for the T6 I think you'll be fine for picking up schools and stuff.
2mtech is offline   Reply With Quote
Reply



Outrunner as an internal winch motor - Similar Threads
Thread Thread Starter Forum Replies Last Post
Internal servo winch spool AnimalHippie General Crawlers 7 01-18-2019 06:49 AM
outrunner motor cytogen G-Made Crawlers 4 01-11-2013 04:53 PM
outrunner motor - which one? wminmi Axial AX-10 Scorpion 2 03-01-2010 08:10 PM
outrunner motor colorado_crawler Team Losi Comp Crawler 5 08-22-2009 04:27 PM
outrunner motor what KV's are liked ? toy4crawlin Electronics 2 08-30-2008 06:18 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com