03-05-2014, 06:58 PM | #1 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Josh's Bully 2
Ok here we go building another bully. Got some shiny new axles, knuckle weights, and a Rowdy racing battery tray. The outer weights are the add ons from Dlux. Drilled and tapped the Rc4wd weights so I could bolt the circular ones on. Thanks for the weights and tray Chris.
|
Sponsored Links | |
03-06-2014, 03:27 AM | #2 |
I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
| Re: Josh's Bully 2
Welcome to the Revolution!!!!
|
03-06-2014, 06:03 AM | #3 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: Josh's Bully 2
Thanks for the hospitality. I am loving these things. Its nice only wanting to change a few things on bully's instead of recreating them from the ground up.
|
03-06-2014, 06:34 AM | #4 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| Re: Josh's Bully 2
Game on!
|
03-06-2014, 08:45 AM | #5 |
RCC Addict Join Date: Nov 2011 Location: Surrey,BC- Canada
Posts: 1,663
| Re: Josh's Bully 2
welcome Yes I agree, it's nice to be able to buy something without changing almost everything on them. |
03-08-2014, 04:28 PM | #6 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: Josh's Bully 2
Mounted up a Jr servo it is the MPH83T. Also going to install some 30T torque master pro motors from Holmes Hobbies. I don't know it the servo arm is going to make it to the party. I think it is going to be too long for the short arms on the knuckles.
|
03-08-2014, 04:35 PM | #7 |
RCC Addict Join Date: Nov 2011 Location: Surrey,BC- Canada
Posts: 1,663
| Re: Josh's Bully 2
That arm will be fine Same arm I'm running with no issue |
03-08-2014, 04:38 PM | #8 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: Josh's Bully 2
I'll give it a try. If I have to turn down my epa its coming off. I set my steering up so I am using full throw.
|
03-08-2014, 05:47 PM | #9 |
RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North
Posts: 1,373
| Re: Josh's Bully 2
Yeah, I had to turn down my EPA a bit as well.
|
03-08-2014, 06:07 PM | #10 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: Josh's Bully 2
I like to use all of the throw so I can take advantage of all of the force available.
|
03-08-2014, 06:09 PM | #11 |
RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North
Posts: 1,373
| Re: Josh's Bully 2
Me too but it goes too far and causes the tires to bind on the links, hence the turned down EPA.
|
03-10-2014, 06:52 PM | #12 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: Josh's Bully 2
Got the drag link and tie rod! Used Vanquish 105mm and 155mm 3\16" Ti rods.
|
03-10-2014, 07:10 PM | #13 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| Re: Josh's Bully 2
Hmm...
|
03-10-2014, 07:25 PM | #14 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: Josh's Bully 2
Just a slight bend on each end wahoo! Chris I caught your note on the servo getting moved over by the upgraded mount. I was going to try and work around it, but an extra 1/8" of room cannot be ignored.
|
03-14-2014, 09:19 AM | #15 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: Josh's Bully 2
Made a CF .125" for Chris or 3.17mm servo plate and spaced it up with two aluminum traxxas ball ends. Lots of room for shocks and links now! I wish the servo wire was out the other side. Might have to take it apart and fix that.
|
03-17-2014, 01:17 PM | #16 |
RCC Addict Join Date: Mar 2011 Location: Way out there!
Posts: 1,465
| Re: Josh's Bully 2
I received a short robitronics servo arm from TCS crawlers. I am able to get full steer with the innermost hole. I am really happy with this. I might be raising the servo up a little. It hangs down below the axle tube. I like the lowered CG. I don't like the vulnerability. I also love the ground clearance of these axles and want to take advantage of it.
|
03-17-2014, 01:39 PM | #17 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| Re: Josh's Bully 2
I have the bottom of my servo flush with the bottom of the axle tube.
|
03-17-2014, 02:37 PM | #18 |
RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North
Posts: 1,373
| Re: Josh's Bully 2
Where are you going to hang your battery?
|
03-17-2014, 03:58 PM | #19 |
Rock Crawler Join Date: Aug 2010 Location: Martinique
Posts: 660
| |
03-17-2014, 06:39 PM | #20 |
5th D Owner/Driver Join Date: Dec 2005 Location: Snoqualmie, Wa.
Posts: 1,916
| Re: Josh's Bully 2 |
Josh's Bully 2 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Josh's villain | landon4 | Axial AX-10 Scorpion | 6 | 04-21-2014 08:24 AM |
Josh's μCrawler | Mike Rawler | Losi Micro-Rock Crawler | 6 | 10-13-2013 11:52 PM |
Josh's tj ttc | upoveryou | 2.2 Scale Rigs | 3 | 03-16-2011 02:35 PM |
josh's scx-10 (first scaler) | josh97 | Axial SCX-10 | 6 | 04-22-2009 09:19 AM |
| |