|
| LinkBack | Thread Tools | Display Modes |
01-28-2017, 09:49 AM | #1 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| R.N.S. Builds A Rusted Development And Finds A Trail too.
Being in the hobby for a long while and doing a few builds on here and owing the axial AX10 brand since day one I've always wanted to try a leaf spring rig and why not a TF2. After Doing a little bit of home work and checking different builds and tips it kinda gave the itch to try one out. I wanted the kit version rather then getting the RTR cause i rather build then just take it out of the box and run,what's the fun in that.Ha ha So to start off most of the stock parts will stay stock until I have to F.ix O.r R.epair D.aily "use to own one"Ha Ha,and with a few mods here and there that are new to me. Most of my time will be spent on the body and not so much on the the roller "For now". What's with the void sticker... So this is where I at now Because i have to wait for more parts i won't be building this in it's exact order so for now I'll be putting these together for now.. needed a tool for the 2mm bolts so i made my own and a comparison for the foams.. 1.55 3.50-3.95 Standard inners/Soft/CI Nova foams: I found even with these foams the tires they are still kinda of hard should i put a hole in the tire just to release some air. I wanted to see how it would look have the Landies and steelies on backwards Normal width for both landies with Micky Thompson ATZ and steelies with the Mud Thrashers is 8 1/2". Flipping the the landies backwards with the M/T ATZ extends the width to 9 1/4" Look there already rusty from the factory.The Landies are raw steel and are made to rust unless you like to paint them.... caparison for 3 different wheels last pics at 9 1/4" wide.......... Odd ball screw that came with the Wagon wheels Still waiting for parts and will update as they arrive and hope it all makes sense... |
Sponsored Links | |
01-29-2017, 08:02 AM | #2 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
Still waiting for parts and scale bolts so I started assembling the body first to see what has to be painted and just to see how fit and finish looked.while i was ready to install the dash i notice a big gap between the windshield and dash.i want to move it closer to the windshield but not sure if my driver will reach the steering wheel...has any body else run into this problem.. |
01-29-2017, 11:34 AM | #3 |
Newbie Join Date: Jan 2017 Location: Astoria
Posts: 47
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
Have the same problem with mine. I noticed the windshield fit is poor at best. It almost seems to be to large for the cab. DUDE? 5 lugs on a Yota ?????????? Say it ant so Joe....... |
01-29-2017, 12:31 PM | #4 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
Never notice till you mention it,ya just ruin my day man.. Doesn't matter to me how many lugs could be 8,12,24 military .. if it looks cool I'm all for it.... funny my windshield fits perfectly flush with the window molding inside,but the front dash about 1/4" gap to the windshield.when it come time to paint it you will see the gap more visible with the dash curving down... |
01-30-2017, 12:24 AM | #5 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
decided to move it closer to the windshield and didn't take much .All i did was drill some holes... Also de-burr all plastic parts for the body and is all mocked up and ready for color choices....seats in also.. |
01-31-2017, 10:27 PM | #6 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
I thought i had enough Primer tonight well i guess not half way through paint i ran out .... so I had time to paint up the Tail lights and side markers.. |
02-01-2017, 08:14 PM | #7 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
founds some cheap no name Primer 2 for the price of one better then paying double for top brand,and some 800,1500 ,grit sandpaper will smooth every thing out.I have 3 coats of each spread around randomly over the body let dry a couple hrs and sanded down with 800 grit... A few more coats and time for some table salt and a little bit of orange. It will be my first attempt and getting nervous... |
02-03-2017, 01:33 AM | #8 |
I wanna be Dave Join Date: Apr 2014 Location: North Carolina
Posts: 2,254
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
Nice start, sir. For what it's worth, for all around trailing and moderate crawling, the stock Mud Thrashers work quite well with stock foams and no venting. The X3 compound is firmer than X2SS, so there's not as much to be gained from swapping out foams and venting. On most of the X2SS tires, I've found new foams to be a must. Re the windshield and dash, I've found that a few minutes with the heat gun helps get everything tucked in and flush, but looks like your solution worked just as well. |
02-03-2017, 08:13 AM | #9 | |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too. Quote:
Oh ya I'll be looking into getting the Skid plate i like to try this one first to try it out.. | |
02-03-2017, 08:53 AM | #10 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
well scale bolts came in yesterday so put the body aside for now and going to try to get this TF2 rolling.. I bought the scale bolts from LockupRC came in zip lock bags...So instead of measuring each one with a caliper i found some containers labeled each one to speed things up... Scale Hex Bolts Kit MC Zinc Also when i took the axles apart to add a little marine grease i wanted to do the shim mod but only had one shim there was no shim inside so i left it alone... It really doesn't have much play in it at all... Once that was done it was time to make it look real...... here also I went ahead and reserved the bolts for the shackles so that the head shows on the outside of the chassis... I'll set it up the way the instruction ask for.So no bruiser shackles i couldn't find any so while i was shopping at RCmart i ended up ordered some G-Made shackles not sure if there going to work but hell they were cheap... Gmade Leaf Spring Shackle Set Sawback GS01 1 10 RC Car Crawler Off Road GM52304 | eBay and at the same time i ordered these to I notice the shackles look longer and for a good price.... Xtra Speed Steel Leaf Type Suspension RC4WD TF2 D90 RC Cars Crawler XS 59481 | eBay Till next time.... |
02-04-2017, 08:31 AM | #11 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
First Error not in my part but RC4WD "rear chassis brace"....Not sure what right the instructions or the part it self had to reverse it,wouldn't any other way.....also i find there a late delay in the rotatiion of the spur gear,ya turn it about 1/4 turn then the drive shaft starts to turn... added some more scale to the transfer case....and added some more protection..... just like the real 1:1 came in bubble wrap..... Also found another flaw.....and i see a failure here the pin is low and it's flush on the other side just like the one next to it.... and more scale ...... So all i have to say so far this thing is so cool ..... Last edited by rustneversleeps; 02-04-2017 at 08:41 AM. Reason: More info |
02-05-2017, 04:45 AM | #12 |
I wanna be Dave Join Date: Apr 2014 Location: North Carolina
Posts: 2,254
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
The play you notice in the tranny is normal for the two-speed and is also normal in other two-speed trannies. Because there is no clutch, there needs to be some play to allow for shifting. The scale bolts look great! |
02-05-2017, 06:10 AM | #13 |
Newbie Join Date: Jan 2017 Location: Astoria
Posts: 47
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
X2 on the scale bolts.
|
02-05-2017, 07:44 AM | #14 |
Rock Stacker Join Date: Jan 2017 Location: Imperial
Posts: 89
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
x3 Scale bolts are a very nice touch
|
02-05-2017, 07:53 AM | #15 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too. yes i found out later on on a few old threads i read dated back in 2013 that was the reason so now that i know and it's not a flaw I'm cool with that.
|
02-05-2017, 07:55 AM | #16 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too. |
02-05-2017, 08:12 AM | #17 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
well since you guys like the scale bolts here it is all done up and finished and body mock up and now it's time for the steering linkage...... now i bought these going to try to use them as my steering linkages... so time to get back to work ..I should have this R.D running today... |
02-05-2017, 10:14 AM | #18 | |
Rock Stacker Join Date: Jan 2017 Location: Imperial
Posts: 89
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too. Quote:
| |
02-06-2017, 08:22 AM | #19 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
No but really i wanted to use it as a steering link..I know it stabilizer bar but bought 2 because i didn't know what size i needed.So i figured lets see what it would look like with both on. they looks ok but never seen one in a 1:1 so i use the small one 65-90mm the other one 90-120mm will be use on my hard body Chevy.. |
02-06-2017, 08:49 AM | #20 |
Rock Stacker Join Date: Jan 2017 Location: Imperial
Posts: 89
| Re: R.N.S. Builds A Rusted Development And Finds A Trail too.
Looks better with just the one.
|
R.N.S. Builds A Rusted Development And Finds A Trail too. - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
lowslowTJ builds a comanche x-trail | lowslowTJ | 1.9 Scale Rigs | 65 | 10-14-2015 11:11 PM |
Midwestaaron builds a trail finder 2 | Midwestaaron | RC4WD Trail Finder 2 | 14 | 03-09-2014 07:45 AM |
Lets see some X-Trail builds | Killa-Cotton | General Scale Talk | 36 | 09-18-2010 11:09 PM |
home made trail builds | aprobert1981 | General Scale Talk | 28 | 05-04-2010 10:14 AM |
| |