RCCrawler Forums

3Samudra · 10-03-2007, 06:28 PM

this is my first clod build
killer crawler

55t int
telkin rebel
nn chassis/links
spec rec
4800 lipo
narrowed swamp dogs
rc4wd rims...axel tubes..shafts/axels..lockers..pinions

admiket · 10-09-2007, 04:43 PM

heres my clod

2 55t lathe
rooster 12t
futaba s3305
2.2 moab on pede rear wheels

eddie · 10-21-2007, 11:05 PM

http://www.rcuniverse.com/gallery/ga...yfindTitle.cfm

gstealer · 11-09-2007, 07:40 PM

18" WB clod Pimp cane
XTM Pentos narrowed with Moab XL's
dual steering with towerpro MG945
old HPI bronco body
55T motors with a Moped ESC

TIMZKRAWLER · 11-13-2007, 06:43 PM

51WillysJeep · 11-13-2007, 08:53 PM

This was a fun project that I wanted to build for a while. A "Beefy" ex-military truck on steroids, that had gobs of gearing, and plenty of articulation..!!! Its got a Novak super rooster, dual 45turn lathe motors, 9 tooth pinions, locked diffs, front and rear steering ( rear is on a seperate toggle switch ) and yes, the axles will pivot 90% with the body on !!!

chris_dishmon · 11-16-2007, 07:14 PM

my first clod. gonna build her to crawl/bash.

super clodbuster
shaved axles rear lockout
locked diffs
waterproofed electronics
modified stock suspension to articulate better

soon to come....
Mtroniks Viper RV
35 turn motors
rage or gecko 2 chassis

drcooper · 11-25-2007, 02:47 PM

Skull Rover project:
MnL modified chassis
Integy's 65 turns with 9t pinions
TR2, volt reg, 8-cells 4000 mah bat pack
5955tg at steering and a standard servo for rear dig
cut Asso BFT's on narrowed RPM StableMax rims
Kamtec ABS body with functional lights and warnings

TURBOFEST · 11-27-2007, 10:15 AM

My work in progress:

Chassis: TIG welded 1/8 & 3/16" aluminum...my design (full polish)
Axles: Clod w/ alum. lockers and custom axle C's
Motors: 55ts
Pinion: adjustable
ESC: Super Rooster
Servo: Junk now...soon to be 5955's
Tx: TQ3 w/ mod. & pots
Tires: Moab xl
Wheels: Axial 8 hole bc
WB: depends where I'm at...15.25"-18"
Body: Axial Betty (w/ real wood paneling lol)
Links: RCguy
Shocks: WK, AE 1.32", AX10...soon to be Integy msr10 droops

Pics:

30percent · 11-27-2007, 03:09 PM

Clod Unlimited
Integy 65T Motors
Airtronics- Rock Buster Servos (2)
Delrin Gears
Proline Moab XL tires
Axial Beadlock wheels
Novak Heavy Duty ESC
Specktrum 3ch.
Clod-Mod Dual Steer Curcuit
Proline Roof Rack
HPI Rubicon Body

If I missed a manufactuer in this build, they didn't exsist... hehe j/k but it's somewhat of a mutt.

pictures taken @ Flagstaff rd, Boulder CO.

BR1GG5Y · 11-29-2007, 10:04 AM

Chassis: junfac stealth (early model)
ESC: M-Tronis Viper (water proof)
Battery: 2800 stick pack
Servo: ServoShop.co.uk own make metal gear servo
Rims: Stock but narrowed
Tyres: Stock
Motors: Stock
Pinons: Stock
Shocks: unknown

The rest of the images are here;
http://s181.photobucket.com/albums/x...ock%20Crawler/

ussprinceton2004 · 01-04-2008, 08:53 AM

my stock and my modified Clodbuster

carbonuts · 01-04-2008, 02:49 PM

Here is one of it as a roller with the old body.

and a couple with the new body at the hangover crawl.

nice pix pinky

oswald3 · 01-18-2008, 10:46 PM

nn chassis
moab xls for now
narrowed prolines
55 turn
8 tooth
tundra body
integy aluminum front end
mamba max esc
333oz hitec
lots of good times and these are oler pics (esc, servos, etc)

sketch · 01-30-2008, 02:13 PM

My 2.2 clod

laxjj14 · 02-09-2008, 05:50 PM

hustler chassis
novak rooster
65 turn motors
8tooth
jr z9000t servos
castle creations bec
clodmod dual steer computer
axial beadlock rims
proline moab xl

dkur · 02-10-2008, 08:29 AM

Here's a picture of my clods. The one is stock as if you couldn't tell. The yellow Dodge is my super crawler I just finished. I thought I might post it while it was still shiny and new. That won't be the case for long.

Here's the latest pic of my super sporting a new body, Axial Beadlocks and Moab XL's. I also changed pinions to 9 tooth in front and 8 in the rear. This was taken at a comp that I attended a few weeks back.

holden-v8-ss · 02-13-2008, 12:57 AM

holden-v8-ss · 02-13-2008, 07:22 PM

holden-v8-ss · 02-13-2008, 07:27 PM

C:\Documents and Settings\Jo Walton\...ts\My Pictures

10-03-2007, 06:28 PM	#181
3Samudra Pebble Pounder Join Date: Apr 2007 Location: san diego Posts: 110	clod bug this is my first clod build killer crawler 55t int telkin rebel nn chassis/links spec rec 4800 lipo narrowed swamp dogs rc4wd rims...axel tubes..shafts/axels..lockers..pinions Attached Images

10-09-2007, 04:43 PM	#182
admiket Pebble Pounder Join Date: Apr 2006 Location: Grand Rapids Posts: 172	heres my clod 2 55t lathe rooster 12t futaba s3305 2.2 moab on pede rear wheels Attached Images

11-09-2007, 07:40 PM	#184
gstealer Quarry Creeper Join Date: Jul 2006 Location: Ontario, NY Posts: 254	18" WB clod Pimp cane XTM Pentos narrowed with Moab XL's dual steering with towerpro MG945 old HPI bronco body 55T motors with a Moped ESC Attached Images Last edited by gstealer; 11-13-2007 at 02:04 PM.

11-13-2007, 06:43 PM	#185
TIMZKRAWLER Rock Crawler Join Date: Apr 2007 Location: APPLE VALLEY,CALIFORNIA Posts: 985	my first clod super build

11-13-2007, 08:53 PM	#186
51WillysJeep RCC Addict Join Date: Nov 2007 Location: Massachusetts Posts: 1,184	Classified Military File... aka...The "WARTHOG" This was a fun project that I wanted to build for a while. A "Beefy" ex-military truck on steroids, that had gobs of gearing, and plenty of articulation..!!! Its got a Novak super rooster, dual 45turn lathe motors, 9 tooth pinions, locked diffs, front and rear steering ( rear is on a seperate toggle switch ) and yes, the axles will pivot 90% with the body on !!!

10-21-2007, 11:05 PM	#183
eddie Newbie Join Date: Dec 2004 Location: NJ Posts: 4	http://www.rcuniverse.com/gallery/ga...yfindTitle.cfm

11-16-2007, 07:14 PM	#187
chris_dishmon Quarry Creeper Join Date: Nov 2007 Location: Cincinnati Posts: 401	my first clod. gonna build her to crawl/bash. super clodbuster shaved axles rear lockout locked diffs waterproofed electronics modified stock suspension to articulate better soon to come.... Mtroniks Viper RV 35 turn motors rage or gecko 2 chassis

11-25-2007, 02:47 PM	#188
drcooper Pebble Pounder Join Date: Feb 2006 Location: FRANCE Posts: 141	Skull Rover project: MnL modified chassis Integy's 65 turns with 9t pinions TR2, volt reg, 8-cells 4000 mah bat pack 5955tg at steering and a standard servo for rear dig cut Asso BFT's on narrowed RPM StableMax rims Kamtec ABS body with functional lights and warnings

11-27-2007, 10:15 AM	#189
TURBOFEST I wanna be Dave Join Date: Aug 2007 Location: JERSEY BOONDOCKS Posts: 3,360	My work in progress: Chassis: TIG welded 1/8 & 3/16" aluminum...my design (full polish) Axles: Clod w/ alum. lockers and custom axle C's Motors: 55ts Pinion: adjustable ESC: Super Rooster Servo: Junk now...soon to be 5955's Tx: TQ3 w/ mod. & pots Tires: Moab xl Wheels: Axial 8 hole bc WB: depends where I'm at...15.25"-18" Body: Axial Betty (w/ real wood paneling lol) Links: RCguy Shocks: WK, AE 1.32", AX10...soon to be Integy msr10 droops Pics: Last edited by TURBOFEST; 04-25-2008 at 09:26 AM.

11-27-2007, 03:09 PM	#190
30percent Quarry Creeper Join Date: Nov 2007 Location: Funky Town Posts: 211	Clod Unlimited Integy 65T Motors Airtronics- Rock Buster Servos (2) Delrin Gears Proline Moab XL tires Axial Beadlock wheels Novak Heavy Duty ESC Specktrum 3ch. Clod-Mod Dual Steer Curcuit Proline Roof Rack HPI Rubicon Body If I missed a manufactuer in this build, they didn't exsist... hehe j/k but it's somewhat of a mutt. pictures taken @ Flagstaff rd, Boulder CO.

11-29-2007, 10:04 AM	#191
BR1GG5Y Newbie Join Date: Dec 2006 Location: England Posts: 12	Chassis: junfac stealth (early model) ESC: M-Tronis Viper (water proof) Battery: 2800 stick pack Servo: ServoShop.co.uk own make metal gear servo Rims: Stock but narrowed Tyres: Stock Motors: Stock Pinons: Stock Shocks: unknown The rest of the images are here; http://s181.photobucket.com/albums/x...ock%20Crawler/

01-04-2008, 08:53 AM	#192
ussprinceton2004 RCC Addict Join Date: Jun 2006 Location: Durham, NC, USA Posts: 1,164	my stock and my modified Clodbuster

01-04-2008, 02:49 PM	#193
carbonuts Quarry Creeper Join Date: Jul 2006 Location: I didn't build that course. Posts: 479	Here is one of it as a roller with the old body. and a couple with the new body at the hangover crawl. nice pix pinky Last edited by carbonuts; 01-04-2008 at 02:51 PM.

01-18-2008, 10:46 PM	#194
oswald3 Newbie Join Date: Jan 2008 Location: titusville Posts: 3	nn chassis moab xls for now narrowed prolines 55 turn 8 tooth tundra body integy aluminum front end mamba max esc 333oz hitec lots of good times and these are oler pics (esc, servos, etc)

01-30-2008, 02:13 PM	#195
sketch Newbie Join Date: Jan 2008 Location: lockeford Posts: 32	My 2.2 clod Attached Images

Sponsored Links

02-13-2008, 12:57 AM	#198
holden-v8-ss Newbie Join Date: Feb 2008 Location: New Zealand Posts: 10	my clod buster stick from New Zealand

02-13-2008, 07:22 PM	#199
holden-v8-ss Newbie Join Date: Feb 2008 Location: New Zealand Posts: 10	My clod buster stick chassis from New Zeanald

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/tamiya-clod-buster/1878-rock-clod-gallery-place-post-ur-clod-action.html
Posted By	For	Type	Date
RC-TRIAL.PL :: Zobacz temat - nacieszcie oczêta :D	This thread	Refback	02-19-2013 09:33 AM

02-09-2008, 05:50 PM	#196
laxjj14 Quarry Creeper Join Date: Jun 2007 Location: Concord nh Posts: 332	hustler chassis novak rooster 65 turn motors 8tooth jr z9000t servos castle creations bec clodmod dual steer computer axial beadlock rims proline moab xl Attached Images

02-10-2008, 08:29 AM	#197
dkur Pebble Pounder Join Date: Feb 2008 Location: here Posts: 109	My clods Here's a picture of my clods. The one is stock as if you couldn't tell. The yellow Dodge is my super crawler I just finished. I thought I might post it while it was still shiny and new. That won't be the case for long. Here's the latest pic of my super sporting a new body, Axial Beadlocks and Moab XL's. I also changed pinions to 9 tooth in front and 8 in the rear. This was taken at a comp that I attended a few weeks back. Last edited by dkur; 07-21-2010 at 08:04 AM.

02-13-2008, 07:27 PM	#200
holden-v8-ss Newbie Join Date: Feb 2008 Location: New Zealand Posts: 10	C:\Documents and Settings\Jo Walton\...ts\My Pictures

RCCrawler Forums

Thread: The Rock-Clod Gallery: A place to post u'r clod in action!