09-24-2006, 02:01 PM | #121 |
Quarry Creeper Join Date: Mar 2006 Location: ft. collins
Posts: 419
|
My newly rebuild NN Clod: 55t lathes TR2 Hitec645's TTR CVD's Hot bodies threaded shocks Moabs or RedRocks on narrowed wheels W/ BB's TTR BTA steering on front 16.5" WB 15" wide 4.5" belly clearance TQ3 Radio w/ independent rear steer mod |
Sponsored Links | |
10-05-2006, 04:27 AM | #122 | |
Newbie Join Date: Feb 2006 Location: australia
Posts: 6
| Aussie spec Crawler
Hey thought I'd finally post up some shots of my Rig Been in progress for bout 12 months and is ever evolving!! Body: Hpi Ford Bronco Chassis: Rc Guy Gecko Pro 60/40 Axles: Clod Shocks: Ae 4in shocks, 30wt oil, red springs Diff f&r: Trackgear III Wheel adaptors: RC4WD.com 23mm adaptors/wideners Wheels: Proline Cheyenne Narrows- Narrowed to 2inches wide Tires: Proline Moab Xl- 6 ounces to front 3ounces to rear reversed tread Skid plates: ebay specials- stainless steel Misc: Axle braces, custom upper links Electronics Esc: Novak Super rooster Servo's: Tower Pro mg995 Receiver: Spektrum Battery: 8.4v 3300mah Misc: Switches on front and rear motors, novak cooling fan, deans, servo savers Sizes Wheelbase:16.75 inch Track width: 15 inch Centerclearance: 3.5 inch Quote: Last edited by Harley McAuliffe; 10-05-2006 at 10:59 PM. | |
10-25-2006, 03:11 PM | #123 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
|
55Ts 9Ts 16" WB Moped Esc homemade chassis. working on Carbon fiber plates now MT2 shocks Axial beadlocks homemade 12-17mm adaptors Moab XLs Proline Silverado HD (huge MGT size) |
11-07-2006, 05:15 PM | #124 |
Rock Stacker Join Date: Sep 2006 Location: ITALY
Posts: 66
| that's mine OCTOPUS!!!
TXT frame cutted chassis... two clod buster axles of course 2 integy 55t motors tq3 radio equipped hitec ezx pro esc modified clod wheels pro line giant trac tires pro line cj8 boy or modified traxxas emaxx body.. depending if i'm in race or not... hand made skid under axle made by extra blu "wet plastic" hand made "C" last modify... battery on the axles, with hand made support... what do ya think??? |
11-21-2006, 05:17 PM | #125 |
Rock Crawler Join Date: Feb 2006 Location: Easthampton
Posts: 747
|
chassis- homemade single backbone Truck Base :Clod ESC:lrp runner Motor(s):2 55t's Servo(s):645 mg's front and rear Axles:Clod Tires:lst claws on maximizer x-75 beadlocks WB:17.5" Overall Width:17" Diff clearance:2 1/4" Center Chassis clearance:5' Overall height10" Overall weight:around 11lbs |
11-22-2006, 08:47 PM | #126 |
Newbie Join Date: Nov 2006 Location: Acme-Bear Rocks
Posts: 22
| more clod pics
well i guess i could post some pics http://i105.photobucket.com/albums/m...s/P1010088.jpg http://i105.photobucket.com/albums/m...s/P1010106.jpghttp://i105.photobucket.com/albums/m...s/P1010092.jpg http://i105.photobucket.com/albums/m...s/P1010093.jpg http://i105.photobucket.com/albums/m...s/P1010103.jpg http://i105.photobucket.com/albums/m...s/P1010101.jpg http://i105.photobucket.com/albums/m...s/P1010099.jpg http://i105.photobucket.com/albums/m...s/P1010094.jpg http://i105.photobucket.com/albums/m...s/P1010107.jpg Last edited by dugfrompa; 11-22-2006 at 08:57 PM. |
11-25-2006, 10:31 PM | #127 |
I lost my vendor privileges Join Date: May 2006 Location: TOP OF THE HILL
Posts: 3,014
| |
11-26-2006, 05:58 PM | #128 |
Pebble Pounder Join Date: Apr 2006 Location: reno
Posts: 146
|
My v2 chassis not any special and yes i did crawl to that spot |
11-29-2006, 02:54 PM | #129 |
Newbie Join Date: Nov 2006 Location: Acme-Bear Rocks
Posts: 22
| |
12-07-2006, 04:58 PM | #130 |
Quarry Creeper Join Date: Sep 2005 Location: Centerville
Posts: 399
|
This belongs to my 6 year old son, CJ. He is going to kick tail in the comps next year.:-P It has: 55t motors 2.2 Red Rocks on pede wheels MG645's 4WS Teken R2 JR radio Dadmade frame. |
12-14-2006, 01:36 PM | #131 |
'08 2.2 National Champ Join Date: Nov 2006 Location: UTRCRC
Posts: 5,585
| Superbug
Here's my super, finally finished it enough to take a picture Clod Based 16.5 wb Rockbull 2 Chassis Integy Piggyback Shocks w/dual rate springs Narrowed Mashers on Narrowed HPI Wheels Spectrum Losi Bug Body Custom Paint by Joe Harker |
12-16-2006, 03:53 PM | #132 |
Quarry Creeper Join Date: Jul 2006 Location: N. Phoenix
Posts: 440
|
My Brothers Pimp Cane X-mas gift,
|
12-20-2006, 04:20 PM | #133 |
Newbie Join Date: Dec 2006 Location: messing up orders at Bennigan's
Posts: 29
| Clod #7
Had too many, so started using numbers to tell them apart, but this is my main crawling one: 16" CPE Evo chassis, Hot Bodies T-Maxx shocks Savage tires, RPM rims, RC4WD Adaptors 2 Novak XRS ESCs 2 Hitec 645MG Servos Airtonics Avenger w/ servo regulator Integy 65T w/ 9T pinions w/o adj motor mounts BTA front steering Jeep Body |
12-21-2006, 06:59 AM | #134 |
Rock Crawler Join Date: Jan 2005 Location: Windsor, VA
Posts: 573
|
Homemade chassis Clod axles locked with JB weld T-maxx threaded shocks Moab XL's on narrowed Proline beadlocks Hitec 645MG front, Bluebird rear LRP AI waterproof ESC Traxxas TQ3 remoted modded for rear steer 16" wheel base 4.75" belly clearance http://home-and-garden.webshots.com/...51540479eYthpq http://home-and-garden.webshots.com/...51540479wjrqXj |
12-27-2006, 10:16 PM | #135 |
Newbie Join Date: Aug 2006 Location: vancouver
Posts: 29
| here is my babyn action |
12-31-2006, 10:13 PM | #136 |
Picky Fab'r/Acetal Junky Join Date: Jul 2006 Location: Arizona Desert/AJ
Posts: 3,073
|
Chassis: Homebuilt of 6061 alum. ESC: Tekin Rebel 2 Motors: 55t Integy Lathes Servos: Hitec 775MG Quarter Scales Tires: HPI GT's Wheels: Maximizer X-75 Beadlocks Shocks: ProLine Dual Rates Batteries: 7 cell 2500 mAh "A" pack (CheapBatteryPacks.com) Radio: Spektrum DX-6 Wheelbase: 17.5" Overall Width: 15" Belly Clearance: 5" Overall Chassis Height: 7.75" Overall weight: 9.5 lbs. Delrin belly skid, Delrin 3/8" suspension links, Delrin top link mounts, Delrin steering linkages, RC4WD alum. rod ends, RC Guy motor mounts, Crawler Store wheel adapters/wideners, custom wheel weights, JB Welded diffs, 8 tooth pinions, custom 6061 servo mounts....I think that's it. <----- Click To See Big Versions Build thread:Ok, so I will start my noob build thread. Last edited by Offroader5; 01-02-2007 at 06:15 PM. |
01-15-2007, 01:56 PM | #137 |
Rock Stacker Join Date: May 2006 Location: Tenerife
Posts: 51
| Chassis: Rockbull II ESC: Super Rooster Motors: Integy 55T Servos:Hitec 5955 Axles:Clod Tires:Moab XL WB:17" |
01-21-2007, 05:02 PM | #138 |
Newbie Join Date: Feb 2005 Location: Peculiar
Posts: 46
|
Heres my 2.2 Torsion |
01-27-2007, 08:43 PM | #139 |
Newbie Join Date: Jan 2007 Location: vancouver
Posts: 7
| my clod Last edited by koops; 01-27-2007 at 10:22 PM. |
01-28-2007, 08:03 PM | #140 |
Newbie Join Date: Dec 2005 Location: Everett, wa
Posts: 30
|
Here is my homemade torsion chassis. 65t integy's 8&9t's jr9000t front hitec 645 rear TQ3 w/ push button rear steer LRP pro reverse digital 16 1/4" Here's mine.... Last edited by THX_138; 07-05-2012 at 03:04 PM. |
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/tamiya-clod-buster/1878-rock-clod-gallery-place-post-ur-clod-action.html | ||||
Posted By | For | Type | Date | |
RC-TRIAL.PL :: Zobacz temat - nacieszcie oczęta :D | This thread | Refback | 02-19-2013 09:33 AM |
| |