RCCrawler Forums

noname0383 · 03-10-2017, 09:29 PM

This gonna look BAD ASS on the d44

noname0383 · 03-14-2017, 08:33 PM

Oh Hell Yeah

Steering?!?

noname0383 · 03-20-2017, 07:02 PM

Quick mock up to see how they fit under the beast

Ohhhhhhh, this is sexy

Still need some tuning and probably go back to servo-on-axle setup...

My ''old'' scx10 axles served me well over the past years... They were (and still are) very capable, performant and reliable... But they are fully upgraded too $$$ lol

(beeftube, rc4wd chub/lockout, brass knuckles, axial cvd, hd gears, Gearhead upper link mount, lockup panhard,...)

And now:

Steering angle:

noname0383 · 04-02-2017, 05:35 AM

Front Ballistic diff cap and axle servo mount received...

noname0383 · 04-03-2017, 07:41 PM

VERY excited about this...
Back to a ''servo on axle'' setup... Love that setup... so simple and performant!

Suspension is soooo smooth now, the rig flex as an olympic gymnast

The d44 are also butter smooth, very happy with the axles swapping

New axles, new setup, new tires, new cab, new colour, etc... Can't wait to put this rig back on the rocks

joe.bielski · 04-03-2017, 09:37 PM

Man I would love to compete against this rig!!!!

Sent from my iPad using Tapatalk

noname0383 · 04-04-2017, 05:18 AM

Quote:

Originally Posted by joe.bielski

Man I would love to compete against this rig!!!!

Sent from my iPad using Tapatalk

Haha thx dude... Maybe one day...

Bunkleyb283 · 07-01-2017, 04:08 PM

So how well do these axles compare to your old ones?

noname0383 · 07-03-2017, 06:31 PM

Unfortunatly, i didn't have the time to run it since upgraded... Too little time and too many rigs...
Was very busy with my class1 rigs lately... But i intend to test this bad boy very soon (with pics and videos of course)... still got some setup to do...
But right now, i can tell that the actual setup is wayyyyyy smoother then before... Suspension works better, without any restriction...
As for the steering and general quality, d44 axles don't need ALL the costly upgrades i put on my scx10 axles to get the same steering and bulletproofness... ;)

Will upgrade this thread as soon as i can... Can't wait to put this beast at work...

noname0383 · 08-22-2017, 07:33 PM

Finally took the time and spend a lot of time on rocks beating my truggy...
What a beast, I really love the new setup... It perform, flex, everything is butter smooth and a lot of steering angle with the d44 axles...
I really had a blast

Envoyé de mon LG-H873 en utilisant Tapatalk

noname0383 · 08-22-2017, 07:35 PM

And a couple more pics

Envoyé de mon LG-H873 en utilisant Tapatalk

noname0383 · 08-29-2017, 07:37 PM

2 vids i did for testing the new setup and upgrades...

https://www.youtube.com/watch?v=INMtdRuKjNI

https://www.youtube.com/watch?v=VfCeLQtRFi8

noname0383 · 08-23-2018, 06:56 AM

Maintenance done !!!
Now i'm ready to unleash this beast!!!

noname0383 · 09-04-2018, 06:31 AM

Such a great rig... perform so well...

It's one of my oldest build, change form many times to acheived this... but now, i love it

noname0383 · 09-04-2018, 06:37 AM

So now, itme for some more truggy love...

New tires:
https://store.rc4wd.com/RC4WD-Goodye...es_p_5627.html

And a stronger servo:
for 1/10 Offroad RC #BLS-42A Free Ship, ,(BLS-42A) by Blue Bird Full Aluminum Titanium Gears High Voltage Digital Brushless Servo

And I will take the opportunity to redo the wirering... Its the anarchy under the cab

neilus · 11-06-2018, 03:14 PM

Just read through this whole build. Such a great read, and a great truck. I've subscribed to see what you do to it next.

noname0383 · 11-19-2018, 10:21 AM

New rock sliders form ie_rc

noname0383 · 11-19-2018, 10:22 AM

And some pics with my other current build, Gmade BOM

Truggy Love

noname0383 · 04-29-2019, 08:29 AM

New indoor scale track... love it...

Truggy perform as it should... VERY well

B-MOW71 · 04-29-2019, 09:14 AM

Cool pics! The Truggy looks awesome on the tiny truck playground!

03-10-2017, 09:29 PM	#121
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... This gonna look BAD ASS on the d44

03-14-2017, 08:33 PM	#122
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... Oh Hell Yeah Steering?!?

03-20-2017, 07:02 PM	#123
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... Quick mock up to see how they fit under the beast Ohhhhhhh, this is sexy Still need some tuning and probably go back to servo-on-axle setup... My ''old'' scx10 axles served me well over the past years... They were (and still are) very capable, performant and reliable... But they are fully upgraded too $$$ lol (beeftube, rc4wd chub/lockout, brass knuckles, axial cvd, hd gears, Gearhead upper link mount, lockup panhard,...) And now: Steering angle:

04-02-2017, 05:35 AM	#124
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... Front Ballistic diff cap and axle servo mount received...

04-03-2017, 07:41 PM	#125
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... VERY excited about this... Back to a ''servo on axle'' setup... Love that setup... so simple and performant! Suspension is soooo smooth now, the rig flex as an olympic gymnast The d44 are also butter smooth, very happy with the axles swapping New axles, new setup, new tires, new cab, new colour, etc... Can't wait to put this rig back on the rocks

04-03-2017, 09:37 PM	#126
joe.bielski Quarry Creeper Join Date: Apr 2012 Location: Toronto Posts: 214	Re: Starting a truggy... Man I would love to compete against this rig!!!! Sent from my iPad using Tapatalk

07-01-2017, 04:08 PM	#128
Bunkleyb283 Newbie Join Date: Jul 2017 Location: Harper Ferry Posts: 1	Re: Starting a truggy... So how well do these axles compare to your old ones?

07-03-2017, 06:31 PM	#129
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... Unfortunatly, i didn't have the time to run it since upgraded... Too little time and too many rigs... Was very busy with my class1 rigs lately... But i intend to test this bad boy very soon (with pics and videos of course)... still got some setup to do... But right now, i can tell that the actual setup is wayyyyyy smoother then before... Suspension works better, without any restriction... As for the steering and general quality, d44 axles don't need ALL the costly upgrades i put on my scx10 axles to get the same steering and bulletproofness... ;) Will upgrade this thread as soon as i can... Can't wait to put this beast at work... Last edited by noname0383; 11-20-2018 at 05:19 AM.

08-22-2017, 07:33 PM	#130
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... Finally took the time and spend a lot of time on rocks beating my truggy... What a beast, I really love the new setup... It perform, flex, everything is butter smooth and a lot of steering angle with the d44 axles... I really had a blast Envoyé de mon LG-H873 en utilisant Tapatalk

08-22-2017, 07:35 PM	#131
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... And a couple more pics Envoyé de mon LG-H873 en utilisant Tapatalk

08-29-2017, 07:37 PM	#132
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... 2 vids i did for testing the new setup and upgrades... https://www.youtube.com/watch?v=INMtdRuKjNI https://www.youtube.com/watch?v=VfCeLQtRFi8

08-23-2018, 06:56 AM	#133
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... Maintenance done !!! Now i'm ready to unleash this beast!!! Attached Images

09-04-2018, 06:31 AM	#134
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... Such a great rig... perform so well... It's one of my oldest build, change form many times to acheived this... but now, i love it Attached Images

09-04-2018, 06:37 AM	#135
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... So now, itme for some more truggy love... New tires: https://store.rc4wd.com/RC4WD-Goodye...es_p_5627.html And a stronger servo: for 1/10 Offroad RC #BLS-42A Free Ship, ,(BLS-42A) by Blue Bird Full Aluminum Titanium Gears High Voltage Digital Brushless Servo And I will take the opportunity to redo the wirering... Its the anarchy under the cab

11-06-2018, 03:14 PM	#136
neilus Rock Crawler Join Date: Jun 2009 Location: UK Posts: 617	Re: Starting a truggy... Just read through this whole build. Such a great read, and a great truck. I've subscribed to see what you do to it next.

Sponsored Links

Starting a truggy... - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blackfoot Truggy (Ford F-150 Truggy)	saltinemadness	Axial SCX-10	11	10-14-2015 09:51 PM
My Little Truggy: Fourwheelin is Magic? F350 truggy for my daughter	Joe$	1.9 Scale Rigs	44	08-27-2013 07:29 AM
Hilux Scaler Towing Hilux Truggy (douggy truggy) by heinie_21	heinie_21	Videos!	10	02-18-2013 02:15 AM
so im starting a truggy	redneck909	General Scale Talk	17	02-23-2008 08:34 AM

11-19-2018, 10:21 AM	#137
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... New rock sliders form ie_rc Attached Images

11-19-2018, 10:22 AM	#138
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... And some pics with my other current build, Gmade BOM Truggy Love Attached Images

04-29-2019, 08:29 AM	#139
noname0383 RCC Addict Join Date: May 2012 Location: Montreal, Qc Posts: 1,249	Re: Starting a truggy... New indoor scale track... love it... Truggy perform as it should... VERY well Attached Images

04-29-2019, 09:14 AM	#140
B-MOW71 Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio Posts: 4,135	Re: Starting a truggy... Cool pics! The Truggy looks awesome on the tiny truck playground!

RCCrawler Forums

Thread: Starting a truggy...