|
| LinkBack | Thread Tools | Display Modes |
11-24-2014, 07:58 AM | #1 |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Axial Universals.... Mysteriously breaking....
I keep breaking the short side Universal at the universal joint... I have no idea how it keeps happening. Ive checked end point adjustments and have my steering turned down to about 75% on my 4PLS to where its steering just enough to creep left/right. This is the 3rd one Ive broken in a lil over a MONTH! I have NEVER broken the long side. Im breaking the flanges at the Universal joint that hold the U-joint in. (Ill post a pic when I get to my phone on Tapatalk). My rig isnt overpowered I run Holmes TM Expert 27T on 3s but Im a slow guy and very rarely mash on it unless Im climbing loose dirt hills and banks. Saturday I went for a run and heard it when it broke for the first time... I was about 35% Throttle Input climbing a solid flat concrete slab on a man-made course Hardly any Wheelspin at all and the wheels were perfectly straight... Im at a serious loss. I have friends with HUGE Brushless Systems and Crazy wheel weights (I dont run any weight) that have NEVER broken an Axial Universal and here I am about to order my fourth set.... PLEASE HELP!!! My front axle broken down has VP Stage 1 Kit, VP Steering Links, Beef Tubes, Stock Gear, Stock Locker and HITEC 7955TG with Metal Servo Horn. I also run stock driveshafts so I can have weak point before the Universals....WRONG Thanks guys |
Sponsored Links | |
11-24-2014, 08:10 AM | #2 |
RCC Addict Join Date: Feb 2012 Location: UK
Posts: 1,015
| Re: Axial Universals.... Mysteriously breaking....
If you lift the rig and put the power on is there any excessive wobble or balance on that corner? I'd be expecting a unnatural rotation somewhere on that axle. I'd strip and rebuild it.
|
11-24-2014, 08:33 AM | #3 |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Re: Axial Universals.... Mysteriously breaking....
No wobble at all.... Smooth as butter... I don't have a pic of the universal I thought I did. I'll post one when I get home
|
11-24-2014, 08:38 AM | #4 |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Re: Axial Universals.... Mysteriously breaking....
This is where I broke.... As you can see nothing technical at all.... |
11-24-2014, 08:53 AM | #5 |
RCC Addict Join Date: Feb 2012 Location: UK
Posts: 1,015
| Re: Axial Universals.... Mysteriously breaking....
Could it be a bad batch? Were they from the same store?
|
11-24-2014, 08:55 AM | #6 |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Re: Axial Universals.... Mysteriously breaking....
Nope 3 different places.... The Kit (build hasnt been done long), RPP Hobby, and this one came from Amazon....
|
11-24-2014, 09:15 AM | #7 |
RCC Addict Join Date: Feb 2012 Location: UK
Posts: 1,015
| Re: Axial Universals.... Mysteriously breaking....
Got to be something in that axle. Maybe shim it all so there is Zero slop. Put the stock knuckles/C-hubs back on? Maybe the VP kits is just putting a little stress on that axle.
|
11-24-2014, 09:26 AM | #8 |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Re: Axial Universals.... Mysteriously breaking....
Ive tore it down twice...Everything spins freely no binding what so ever. Ive checked everything possible on the bench... My locker does have some slop in it and Ive been thinking of ordering an FI spool to replace it... thats the only "slop" I can find and maybe that is whats causing it everything else is tight.... Everything is you might as well say new I have maybe 10 2200mah packs on the whole build if that many....
Last edited by blackfox93; 11-24-2014 at 09:27 AM. Reason: . |
11-24-2014, 09:37 AM | #9 |
RCC Addict Join Date: Feb 2012 Location: UK
Posts: 1,015
| Re: Axial Universals.... Mysteriously breaking....
I work as a Techie for the internet service. It IMO is as with any fault that cannot be pinned down easily. Trial and error replacing different bits. I'd go back to the stock hubs/knuckle and see if they are better which I suspect they will be as they have give in them. If they are - then to me that says there is some sort of warping issue and the VP kits or bearing are restricting the shaft movement and causing stress to the point where it gives. The tolerances here must be so slight they are not noticeable easily. .....I could also be talking absolute poop and other may have a better idea! |
11-24-2014, 09:52 AM | #10 |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Re: Axial Universals.... Mysteriously breaking....
Thanks Wiz! Im gonna hold out and see what others say. Hopefully somebody has had the same problem as me
|
11-24-2014, 10:59 AM | #11 |
Newbie Join Date: Aug 2014 Location: So. Cal.
Posts: 9
| Re: Axial Universals.... Mysteriously breaking....
I had the same problem with my kit U-joints, short side also. I have a ROC 412 with MMP but I have it geared very slow and I was just doing some pretty intensive crawling up the face of some big rocks when it snapped. My son's Wraith had the stock non kit joints and was doing the same crawling I was and his is fine. I replaced the u-joint with one I bought on from amazon and it has done ok for now with very light crawling, we'll see after this coming weekend if the new u-joints will hold up to some good heavy crawling. Sounds like Axial has a bad batch out there..... |
11-24-2014, 11:14 AM | #12 |
RCC Addict Join Date: Aug 2013 Location: Missoula
Posts: 1,346
| Re: Axial Universals.... Mysteriously breaking....
Guy at work snapped the ear off a brand new short side too. Swapped in a spare I had laying around for a few months and it's been fine. Sounds like they have a problem.... |
11-24-2014, 12:27 PM | #13 |
Newbie Join Date: Jun 2014 Location: Australia
Posts: 20
| Re: Axial Universals.... Mysteriously breaking....
I snapped a short side uni 2 minutes in to their first run two days ago. Kit version.
|
11-24-2014, 12:47 PM | #14 | |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Re: Axial Universals.... Mysteriously breaking.... Quote:
Where did yours break??? mine is breaking right at the ear and its only breaking one ear off.... Pic to come as soon as I get home | |
11-24-2014, 01:15 PM | #15 |
RCC Addict Join Date: Aug 2013 Location: Missoula
Posts: 1,346
| Re: Axial Universals.... Mysteriously breaking.... |
11-24-2014, 01:19 PM | #16 |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Re: Axial Universals.... Mysteriously breaking.... |
11-25-2014, 06:44 AM | #17 |
Newbie Join Date: Jun 2014 Location: Australia
Posts: 20
| Re: Axial Universals.... Mysteriously breaking....
Same place by the sound of it... Nothing else is bent or damaged. This happened after maybe 2 minutes on the maiden voyage. |
11-27-2014, 08:08 AM | #18 |
Rock Stacker Join Date: Mar 2011 Location: Madison, Alabama
Posts: 87
| Re: Axial Universals.... Mysteriously breaking....
Yep that's it but mine is only breaking one side off.... It will still pull but it makes it very sloppy
|
11-28-2014, 09:50 AM | #19 |
Wanna get? Gotta want. Join Date: Apr 2010 Location: SLC, UT
Posts: 7,052
| Re: Axial Universals.... Mysteriously breaking....
IMO, there is definitely a casting issue going on. I modify the shafts for more steering and some of my customers have broken the shafts immediately. Even worse, I have broken a handful not even running them but only taking them apart for grinding. The reason I think its a casting issues is because I can take the broken off part of any given shaft and it will match up perfectly to any of the many broken ones I have here. Imagine that you could super glue the broken off part to any of the shafts that have broken, not just its original match. |
11-28-2014, 10:40 AM | #20 |
Rock Crawler Join Date: May 2012 Location: Washougal
Posts: 625
| Re: Axial Universals.... Mysteriously breaking....
Wow, I hope Axial gets this squared away soon. I have always been surprised how well they hold up but this is obviously a new manufacturing or materials issue.
|
Axial Universals.... Mysteriously breaking.... - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear steer universals?? Keep breaking | CHOPPERMECH11 | Axial Wraith | 15 | 06-01-2013 11:46 AM |
Axial Universals | sally1800 | Axial Wraith | 14 | 08-08-2011 05:23 PM |
anyone breaking universals | twisted bender | Axial XR10 | 37 | 01-11-2011 08:15 AM |
axial transmission keeps breaking | rccrawler77 | Axial AX-10 Scorpion | 10 | 11-01-2010 12:07 AM |
*CKRC 3s lipo mysteriously discharging* | stublet | Electronics | 15 | 09-03-2008 09:15 PM |
| |