Pics of your latest purchase

[mikemcE]

If you airbrush the mask on, that’s good for 3 or 4.

If brushing a couple. A cheap harbor freight touch up gun is perfect for mask.


https://www.harborfreight.com/adjust...gun-92126.html

It will dry much quicker and even


Hang up and Drive

[JacktheRipper]

Originally Posted by mikemcE

If you airbrush the mask on, that’s good for 3 or 4.

If brushing a couple. A cheap harbor freight touch up gun is perfect for mask.


https://www.harborfreight.com/adjust...gun-92126.html

It will dry much quicker and even


Hang up and Drive

Good point, been messing around brushing it on. Like the touch up gun idea better. + good primer coat. Prefer to keep the air bush for top coat.



Thanks
Pep

[Gvus]

Snap on dropped this off finally.


Sent from my iPhone using Tapatalk

[Panther6834]

Originally Posted by Gvus

Snap on dropped this off finally.


Sent from my iPhone using Tapatalk

That is WICKED!!!
Tho, I think it would have been better blue, as opposed to purple.

~ More peace, love, laughter & kindness would make the world a MUCH better place

[Gvus]

Originally Posted by Panther6834

That is WICKED!!!
Tho, I think it would have been better blue, as opposed to purple.

~ More peace, love, laughter & kindness would make the world a MUCH better place

Thanks. My last box (top and bottom cabinets) was blue with a red locker on the right side. Saw this color combination and couldn’t pass it up. Probably doesn’t help that my Snap-on dealer knows I like purple seeing how he told me about this set up before anyone else got a chance to see it.


Sent from my iPhone using Tapatalk

[Panther6834]

Originally Posted by Gvus

Thanks. My last box (top and bottom cabinets) was blue with a red locker on the right side. Saw this color combination and couldn’t pass it up. Probably doesn’t help that my Snap-on dealer knows I like purple seeing how he told me about this set up before anyone else got a chance to see it.


Sent from my iPhone using Tapatalk

If I had a work area...actually, if I had a garage (currently 'stuck' with a carport...lol)...I'd love to have a set-up like that. I'm just not all that into purple...but, I do REALLY like black & blue. In the meantime, my trusty Target folding 2ft x 4ft adjustable-height table, the coffee table in the living room, and the bed (yes, sometimes I actually set up my "workstation" on the bed), will have to do.

~ More peace, love, laughter & kindness would make the world a MUCH better place

[Peaker]

"think I may have ordered to much liquid mask"


Tell the wife it work on the face too, and soon you will have to reorder

[B-MOW71]

More parts arrived today.

- VP VFD Hurtz DIG for the PRO
- Team KNK SS screws for my Team Losi 22-4 restore
- Bearing Kit from Jim’s Bearings for my Losi 22-4
- Team KNK SS screws for the Enduro





Sent from my iPad using Tapatalk

[Panther6834]

The latest additions for my Capra...Yeah Racing Desert Lizard internal spring shocks, and a bunch of M3 nylock nuts (ok, so the nylock nuts will be used on multiple vehicles).
Have to admit, these shocks are a little "unusual". I just opened one of the boxes, to get a 'quick peek', and discovered that the shock caps are on the bottom, as in, the ONLY shock body opening is on the bottom. Instead of filling work oil from the top, as every shock I've ever filled is done, you hold these upside-down, and fill from the bottom. Like I said, "unusual".

~ More peace, love, laughter & kindness would make the world a MUCH better place

[JDM74]

1 tons for the 1:1 GMC.

Untitled by JASON MCKIMMEY, on Flickr

[c0bra]

I don’t have pics but a used wraith cage, ssd wide axle and a long discontinued conversion just came in the mail. Will create a build thread when it’s further along

Also picked up 2kg of filament and some graph paper for a build that I will be starting hopefully soon


Sent from my iPhone using Tapatalk

[JacktheRipper]

Some paint tools, air brush has 3 tips, liquid flow adjustment, on the end of the brush.

pep

[B-MOW71]

Well after retiring from off-road racing 25 years ago, I got bit by the bug again! Hoping to get it built in time to do some indoor racing this winter.




Sent from my iPad using Tapatalk

[Brake Weight]

Not much for $70 but should keep me busy. 3/8 and 1/2” breaker bars and one of those floppy ratchets. Should have my Tacoma tranny on deck tomorrow morning and hopefully back on by dark with a new clutch.

[mikemcE]

Clearance Clarence!!
For Moms Enduro!


Hang up and Drive

[B-MOW71]

Ender 3 Pro 3D printer arrived today. Setup and running the first test print.




Sent from my iPad using Tapatalk

[mikemcE]

Don’t print the Dog......... it’s a 10 hour print, and you won’t have enough filament.
I just got a CR20Pro for $299,
With the auto level I’m shocked how easy this one was!
Yes I already had a good Cura Profile, and it works well. I’ve had great luck with 4.0, but failed with 4.4..... ?????

No clue why.

It took me a long time to get consistent prints, now, slice, load, print.
I run Octoprint on both printers, makes testing quicker.


Hang up and Drive

[B-MOW71]

Originally Posted by mikemcE

Don’t print the Dog......... it’s a 10 hour print, and you won’t have enough filament.
I just got a CR20Pro for $299,
With the auto level I’m shocked how easy this one was!
Yes I already had a good Cura Profile, and it works well. I’ve had great luck with 4.0, but failed with 4.4..... ?????

No clue why.

It took me a long time to get consistent prints, now, slice, load, print.
I run Octoprint on both printers, makes testing quicker.


Hang up and Drive

I skipped past the dog and cat and printed the pig. The pig took 6 hours, but it looks really good for my first ever print. I bought a spool of Overture black PLA to practice with, so I’ve got plenty to work with for now.

I’m a newb at this 3D printing, so everything you just mentioned just flew right over my head.

Tomorrow I plan on digging a little deeper into learning the software and printing some upgrades for the printer that I found on Thingiverse.



Sent from my iPad using Tapatalk

[B-MOW71]

New project just rolled into the shop!

Well, not purchased, but received as a Christmas gift.

These seemed to be one of the latest build crazes!




Sent from my iPad using Tapatalk

[BJoe]

Picked these up today, bought them for a R/C project I just started, but can use most of this on plastic model projects too


Also got this in the mail, it's just some inanimate carbon rod for the same project and why I bought the baby chop saw, figured that I may want to make a couple and that saw would be a whole lot quicker and cleaner than an X-Acto saw and Mitre Box set