I'm building a Berg.

[SkaldidDog]

Originally Posted by KBrog

I also have RC Axle Master rear shafts. Is there any certain tube I need for those or will any of the above work?

Tubes for said axles may need to be bent slightly to accommodate them.

Just fugginwitchaz.

J

[Farmer]

Originally Posted by KBrog

I also have RC Axle Master rear shafts. Is there any certain tube I need for those or will any of the above work?

They all should work Welcome to the cool axles
Later,
Farmer

[Bc Paints]

I really like my rcbros tube and dlux knuckle combo, creeper Bob rears drop right in, dlux Ofna style front shafts required minor hogging out of the front tubes

[picklewagon]

I have RcBros tubes, original super 300's, Rc axle master rear inners, it all works together. If I remember correctly, I had to slightly drill out the rear bros tubes to accept the axle masters, but it was easy. Im just trying to find splined chubs that are NOT 8*.

[Bc Paints]

Originally Posted by picklewagon

I have RcBros tubes, original super 300's, Rc axle master rear inners, it all works together. If I remember correctly, I had to slightly drill out the rear bros tubes to accept the axle masters, but it was easy. Im just trying to find splined chubs that are NOT 8*.

Hens teeth

[picklewagon]

Did they ever exist??

[Bc Paints]

Originally Posted by picklewagon

Did they ever exist??

To the best of my knowledge, no
best is to follow the rcbros instructions for axial non 8* install, that or knock the splines off your tube on a lathe.

[picklewagon]

Thanks BC... Now that I've thread jacked a bit...

[KBrog]

Thanks everyone for all the info and welcoming me into the Berg club.

Here is a pic of what I have to start with. Thanks a million to Mariner for helping me out with the great deal.

All these parts will be going into the awesome axle tubes I have on the way.

Question about the RC Axle Master shafts: which ones are they? One set is a light color the other dark.

[Krawler Kev]

They are the heavy ones.

What chassis are you planning on running Karl?

[greencrawler]

I wouldn't pay too much attention to Rowdy, he runs those OTHER axles!





What chassis are you going to run?

[ROWDY RACING]

What's wrong with those tubes?

[TEDROCKZ]

Originally Posted by KBrog

All these parts will be going into the awesome axle tubes I have on the way.]

Probably end up similar to these? Same C, knuckle, weight, shaft set up. If you are going the CCC route that is.

[KBrog]

Originally Posted by Krawler Kev

They are the heavy ones.

What chassis are you planning on running Karl?

I have not weighed them??? I don't even know what the non-RC Axle Master shafts are.

Originally Posted by greencrawler

I wouldn't pay too much attention to Rowdy, he runs those OTHER axles!


What chassis are you going to run?

I can tune ppl out and not even blink That's what happens after years of the same girlfriend, kids, and being an inspector . You should try and drive to a long distance comp with Rowdy

Originally Posted by ROWDY RACING

What's wrong with those tubes?

Nothing wrong with the tubes I have. I mainly wanted modern tubes for the link mounts.


Chassis? When I choose a chassis I go with what catches my eye. That's why I run a T1E SS on my XR10, and that's why I chose a CCC Mutt for my Berg. I like the adjustment of the front shocks & upper links at the chassis, and the overall appearance.

[ROWDY RACING]

Originally Posted by KBrog

I can tune ppl out and not even blink That's what happens after years of the same girlfriend, kids, and being an inspector . You should try and drive to a long distance comp with Rowdy

Storing in memory bank.

[ClassiCutCustoms]

Originally Posted by KBrog

I can tune ppl out and not even blink That's what happens after years of the same girlfriend, kids, and being an inspector . You should try and drive to a long distance comp with Rowdy .

Now that is just down right funny and quick wit........ I love it. You are a man of few words.... But straight to the point! I can see you being a good inspector

[ROWDY RACING]

Originally Posted by ClassiCutCustoms

Now that is just down right funny and quick wit........ I love it. You are a man of few words.... But straight to the point! I can see you being a good inspector

If you only knew...

[KBrog]

Originally Posted by ROWDY RACING

Storing in memory bank.

Yup, just like a little whaaaaaaaa

[KBrog]

Just pocking fun at ya Rowdy.

Originally Posted by TEDROCKZ

Probably end up similar to these? Same C, knuckle, weight, shaft set up. If you are going the CCC route that is.
Attachment 290946

It's looking that way.

[EverettY]

Glad to see those Ti Shock Shafts you got at NENQ Being put to use