08-09-2007, 03:38 PM | #141 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
I don't want you to break your rig. Looking at the pics I can already tell you right now. Don't do it. The quarter inch links are NOT going to get you there man. Plastic rodends?!!!! I thought you said you were all metal!! I am talking about 10 foot drop offs ALL DAY LONG. I'm talking about being so wedged, those quarter inch links would turn into playdoh. Two brushless motors pull more of a draw then a single large brushless. Are you running two packs? Also I am running A123 cells. 13.2 volts Have you ever run the Jumbo Swamp kongs in thick mud? My Drive train is HAND BUILT to hold this motor AND Jumbo kongs. Are you telling me that you are not going to break putting jumbo kongs and outrunners on?? Snappy snappy my friend. As I have said. You are comparing apples to oranges here. A Clod to a shafty. And the fact you have to modify your rig to make it do everything my rig can do, the way it is... If you survive the comp with out something broken and you wanna tug-o-war, I would LOVE IT. But just leave the kongs at home, You do so well at the comps. Don't wreck it doing what it was not designed to do. BASH!!! Last edited by WheelChair; 08-09-2007 at 05:09 PM. |
Sponsored Links | |
08-09-2007, 03:45 PM | #142 |
I wanna be Dave Join Date: Oct 2005 Location: Columbia TN
Posts: 6,154
|
Like I said, I'm looking forward to it.
|
08-09-2007, 04:02 PM | #143 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
Hell yeah! Its going to be fun! |
08-09-2007, 05:57 PM | #144 |
MODERHATER™ Join Date: Nov 2005 Location: Colorado
Posts: 10,939
|
Did someone say tug o war? I'll hook up, I'll even throw on the 8 1/2" LST's if ya want, I'm not scared, I drug a 50 pound weight across the rocks in BC, dead weight. The 2 foot fall you saw where I broke a knuckle was not a rc4wd, those usually just bend, or strip screws out, not saying they are any good though..... Crazy jumper, I can't beleive you get by with those maxx ends on your links, I can't get those to last in my little rockpile out back on my 2.2, let alone my super. But your style is differant from mine. |
08-09-2007, 07:39 PM | #145 |
I wanna be Dave Join Date: Oct 2005 Location: Columbia TN
Posts: 6,154
|
There aluminum now, that pic is a week or so old, heck I was all plastic until a month ago, and made it to the nats with a $450 truck.
|
08-10-2007, 06:25 PM | #146 |
I joined the Band! Join Date: Dec 2006 Location: jacksonville
Posts: 198
|
oh hell ya! the chair vs the copperhead!!! this may get interesting |
08-10-2007, 11:07 PM | #147 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
The Scorpion motor came in the mail today What a masterpiece!! Next week The cells will arrive and I will have to fire this beast up! For now... Back to the WC 2.2 |
08-10-2007, 11:51 PM | #148 |
Rock Crawler Join Date: Mar 2007 Location: Man Cave!
Posts: 892
|
Hey - That motor sounds interesting W.C., hope to check it out at a comp when you get done with the new frame and all the goodies. |
08-10-2007, 11:58 PM | #149 |
Rock Crawler Join Date: Apr 2006 Location: Salem, Orcrc
Posts: 756
|
the wheelchair super is a beast of a rig but i want to see a thread for the wheelchair 2.2.
|
08-11-2007, 12:04 AM | #150 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
| Last edited by WheelChair; 08-11-2007 at 01:49 PM. |
08-16-2007, 07:58 PM | #151 |
I joined the Band! Join Date: Dec 2006 Location: jacksonville
Posts: 198
|
get your cells yet?
|
08-17-2007, 02:33 AM | #152 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
No cells yet SOON! Got the harness made for the lithium balancer today. All set for the A123's and the 3S lipo for the steering. Tried running the Longfellow, (S3032) on 12 HPI 1500 nicad cells last night and blew a negative wire off the pack I love the smell of POWER CONSUMPTION! Tomorrow, Diffs, and Tranny get tore down in preparation for Nats. All bearings checked, and everything disassembled and cleaned. The input shaft is due for replacement. MORE METAL RODENDS! |
08-17-2007, 08:08 AM | #153 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
You should see your package today, methinks.
|
08-17-2007, 01:27 PM | #154 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
Excellent! Thanks JRH! I foresee no sleep tonight!!! |
08-17-2007, 09:49 PM | #155 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
Bad day today. Lost what I had thought was a friend. Big deal went south, so Moab would be a miracle. Nothing came in the mail. Atleast I'll get some sleep tonight. |
08-18-2007, 02:27 PM | #156 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
Nothing in the mail for me today either. Well.... One more wasted weekend! |
08-19-2007, 03:06 PM | #157 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
Oh well. It better show up monday! Im getting a Longfellow here soon too. Maybe it should be called The Beast though, cause it is a beast of a motor.
|
08-19-2007, 04:38 PM | #158 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
I still like "Hoss" What are you putting it in? Its going to be PISSED OFF whatever it is!! The low end TORQUE will blow your mind! Startup is like no other! |
08-19-2007, 04:56 PM | #159 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
I have an 1/8th scale buggy conversion that will see it, and for a crawler I am going to put it into my twin force. I dont have anything else that would take the power (if the tf axles will take it)
|
08-20-2007, 04:01 PM | #160 |
Winner of the '07 RCC dumbass award! Join Date: Nov 2006 Location: Up on a Mountain, out in the Woods
Posts: 661
|
The only thing that came in the mail today... MORE BILLS!! Not looking good for nationals:-( |
| |