RCCrawler Forums

kasper · 03-05-2011, 07:15 PM

Hell i could fit in it perfect with room to spare it weighs more then i almost do.

R/CMaxximus5.0 · 03-08-2011, 05:42 AM

Hey guys I have 2 of the new Axial 2.4ghz Radio systems $30 ea. (Tx/Rx)

Wanted to let y'all know first

be going up in the F/S section in next day or so....

MrNate · 03-15-2011, 08:10 PM

Did you sell those radios? Was thinking about picking one up for my kid's rig, so he doesn't have to drop my DX3S every 5 minutes!

R/CMaxximus5.0 · 03-16-2011, 05:11 PM

sold!

thanks Nate!

TrailDawg362 · 03-19-2011, 11:43 PM

Quote:

Originally Posted by MrNate

Did you sell those radios? Was thinking about picking one up for my kid's rig, so he doesn't have to drop my DX3S every 5 minutes!

Bubble wrap

.

The radio, not the kid

northsydryd · 03-20-2011, 01:18 AM

or sell the kid and buy a new remote

Super · 03-20-2011, 09:23 AM

Me and the Monster made it to High Cliff on Saturday. We gave the new trucks the shake down. We found a few bugs that need to be taken care of but we had a good time.

Took some pix.....

kasper · 03-20-2011, 09:56 AM

Looks like you two had a good time cant wait to do some outdoor crawling.Your rig and jacks lok really nice.

TrailDawg362 · 03-20-2011, 03:27 PM

That's a nice looking truck you have there Monster (lucky kid!)

. I hope you guys let me run with you sometime. Thanks for the pics!

I forgot to give you your motor last time, still have it waiting for you.

TrailDawg362 · 03-22-2011, 06:48 PM

So I decided to bump up the voltage to my HS-5645 servo on my comp rig, trying to get a little more speed/torque out of it. I went from 6 to 7.2 volts, should I be worried?

crawlinisfun · 03-23-2011, 09:47 AM

I don't think you should be worried about it if you read alot of the build threads on here almost everyone turns the bec up and the servo gives a rating for 7.2v

Wicked Klown · 03-23-2011, 01:12 PM

I'd say you would shorten the life of the servo, as it's only rated to 6volts.

Quote:

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts

Edit: I also found out what broke in my dad's rig. Seems I busted the pinion the ring is ok but 6 teeth came off the pinion. Seems I had the older ones that gave people alot of issues. Placed an order with CKRC for two new sets and got my FLM lockers in the mail today.

kasper · 03-23-2011, 02:11 PM

If there is any interest i have a built set of creeper axles for sale rc4wd xvd shafts flm lockers fr raer with hr lockers on back

TrailDawg362 · 03-23-2011, 02:16 PM

Quote:

Originally Posted by Wicked Klown

I'd say you would shorten the life of the servo, as it's only rated to 6v

I looked at the 5645 specs also, but I see alot of people push the voltage limit on their servos. I guess I'll find out

.

Wicked Klown · 03-23-2011, 03:22 PM

I'm guessing it's alot like a CPU. Overclockers push up the voltage beyond what the limit is for more speed. I do this all the time but I know it shortens the life of it, even fried a few.

Satan6907 · 03-23-2011, 11:16 PM

I bought myself another scx-10 dingo tr.

Got an 09 Jeep Rubicon body I was gona use on the creeper but decided to keep it a sporty rig.

I was thinking about buying the Dick Cepek Torque rims for it along with a set of rok lox.

http://store.rc4wd.com/Dick-Cepek-To...s-_p_1090.html

What do ya guys think?

MrNate · 03-24-2011, 07:08 AM

Are you going to comp with the TR or just trail run? I thought the Rok Lox where a great trail tire, ok on the rocks, and terrible at shedding mud. I've been happier with the TSL Bogger's performance, but liked the look of the Rok Lox a lot more.

Those wheels are just plain sweet!

Satan6907 · 03-24-2011, 07:44 AM

Probably just going to trail run.

I bought the HR rear lock outs for my Creeper after breaking the c hub and 2 drive pins.

Got it all fixed up and the body done with just a quick paint job. Hadnt run it since I got it fixed and just took it out to play on the new snow banks and just wheel slip like crazy but yet the front center drive shaft just broke. I have had it under alot more stress while in Oshkosh running 3s and today while running 2s it breaks, Gona take me some time to get this thing reliable I can tell ya what.

kasper · 03-24-2011, 09:34 AM

Look forward to seeing the Dingo walter i went with the new rip saws for the honcho hoping to have it done this week.

TrailDawg362 · 03-24-2011, 01:59 PM

Stampede driveshafts with the Axial retainer rings is a pretty reliable combo, but it's hard to beat MIP or Junfac steel shafts.

03-08-2011, 05:42 AM	#1022
R/CMaxximus5.0 Rock Crawler Join Date: Mar 2008 Location: 920 Valley of the Fox Posts: 768	Hey guys I have 2 of the new Axial 2.4ghz Radio systems $30 ea. (Tx/Rx) Wanted to let y'all know first be going up in the F/S section in next day or so.... Last edited by R/CMaxximus5.0; 03-08-2011 at 05:47 AM.

03-22-2011, 06:48 PM	#1030
TrailDawg362 Rock Slayer Join Date: Jul 2008 Location: Fox Valley WI Posts: 1,684	Servos and 7.2 volts? So I decided to bump up the voltage to my HS-5645 servo on my comp rig, trying to get a little more speed/torque out of it. I went from 6 to 7.2 volts, should I be worried?

03-24-2011, 07:44 AM	#1038
Satan6907 Rock Stacker Join Date: Oct 2009 Location: Brillion Posts: 95	Probably just going to trail run. I bought the HR rear lock outs for my Creeper after breaking the c hub and 2 drive pins. Got it all fixed up and the body done with just a quick paint job. Hadnt run it since I got it fixed and just took it out to play on the new snow banks and just wheel slip like crazy but yet the front center drive shaft just broke. I have had it under alot more stress while in Oshkosh running 3s and today while running 2s it breaks, Gona take me some time to get this thing reliable I can tell ya what. Last edited by Satan6907; 03-24-2011 at 08:59 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-05-2011, 07:15 PM	#1021
kasper I wanna be Dave Join Date: Jul 2008 Location: appleton Posts: 2,067	Hell i could fit in it perfect with room to spare it weighs more then i almost do.

03-15-2011, 08:10 PM	#1023
MrNate Quarry Creeper Join Date: Apr 2008 Location: Racine Posts: 476	Did you sell those radios? Was thinking about picking one up for my kid's rig, so he doesn't have to drop my DX3S every 5 minutes!

03-16-2011, 05:11 PM	#1024
R/CMaxximus5.0 Rock Crawler Join Date: Mar 2008 Location: 920 Valley of the Fox Posts: 768	sold! thanks Nate!

03-20-2011, 01:18 AM	#1026
northsydryd Newbie Join Date: Mar 2011 Location: wisconsin rapids Posts: 48	or sell the kid and buy a new remote

03-20-2011, 09:23 AM	#1027
Super Rock Crawler Join Date: Feb 2009 Location: Wrightstown Posts: 960	Me and the Monster made it to High Cliff on Saturday. We gave the new trucks the shake down. We found a few bugs that need to be taken care of but we had a good time. Took some pix.....

03-20-2011, 09:56 AM	#1028
kasper I wanna be Dave Join Date: Jul 2008 Location: appleton Posts: 2,067	Looks like you two had a good time cant wait to do some outdoor crawling.Your rig and jacks lok really nice.

03-20-2011, 03:27 PM	#1029
TrailDawg362 Rock Slayer Join Date: Jul 2008 Location: Fox Valley WI Posts: 1,684	That's a nice looking truck you have there Monster (lucky kid!) . I hope you guys let me run with you sometime. Thanks for the pics! I forgot to give you your motor last time, still have it waiting for you.

03-23-2011, 09:47 AM	#1031
crawlinisfun Rock Stacker Join Date: May 2009 Location: Wausau Posts: 81	I don't think you should be worried about it if you read alot of the build threads on here almost everyone turns the bec up and the servo gives a rating for 7.2v

03-23-2011, 02:11 PM	#1033
kasper I wanna be Dave Join Date: Jul 2008 Location: appleton Posts: 2,067	If there is any interest i have a built set of creeper axles for sale rc4wd xvd shafts flm lockers fr raer with hr lockers on back

03-23-2011, 03:22 PM	#1035
Wicked Klown Quarry Creeper Join Date: Aug 2010 Location: Sheboygan Posts: 278	I'm guessing it's alot like a CPU. Overclockers push up the voltage beyond what the limit is for more speed. I do this all the time but I know it shortens the life of it, even fried a few.

Sponsored Links

03-23-2011, 11:16 PM	#1036
Satan6907 Rock Stacker Join Date: Oct 2009 Location: Brillion Posts: 95	I bought myself another scx-10 dingo tr. Got an 09 Jeep Rubicon body I was gona use on the creeper but decided to keep it a sporty rig. I was thinking about buying the Dick Cepek Torque rims for it along with a set of rok lox. http://store.rc4wd.com/Dick-Cepek-To...s-_p_1090.html What do ya guys think?

03-24-2011, 07:08 AM	#1037
MrNate Quarry Creeper Join Date: Apr 2008 Location: Racine Posts: 476	Are you going to comp with the TR or just trail run? I thought the Rok Lox where a great trail tire, ok on the rocks, and terrible at shedding mud. I've been happier with the TSL Bogger's performance, but liked the look of the Rok Lox a lot more. Those wheels are just plain sweet!

03-24-2011, 09:34 AM	#1039
kasper I wanna be Dave Join Date: Jul 2008 Location: appleton Posts: 2,067	Look forward to seeing the Dingo walter i went with the new rip saws for the honcho hoping to have it done this week.

03-24-2011, 01:59 PM	#1040
TrailDawg362 Rock Slayer Join Date: Jul 2008 Location: Fox Valley WI Posts: 1,684	Stampede driveshafts with the Axial retainer rings is a pretty reliable combo, but it's hard to beat MIP or Junfac steel shafts.

RCCrawler Forums

Thread: Official WiRCRC Chit Chat