RCCrawler Forums

Bulldog · 08-17-2011, 11:47 PM

Just went through the whole thread for the first time...Big Thumbs up!!!!

The 1:1 pics are killer and the build totally matches up and exceeds in some cases! As for the tires...I love the iroks. The swampers are sweet. The pitbulls are saucy, but the Claws with the lug haircut are my vote!!!!! I can guarantee my claws will not look the same from this point on! Great thread, great build!!!

NGreen · 08-18-2011, 12:26 AM

Looks just right! Told you that you'd love them! Have you had the chance to crawl with them yet?

kaneohecrawler · 08-18-2011, 12:40 AM

Quote:

Originally Posted by 53Guy

Looks just right! Told you that you'd love them! Have you had the chance to crawl with them yet?

Thx nick! And Yes I have man and omg... that's all I can say...

Quote:

Originally Posted by Bulldog

Just went through the whole thread for the first time...Big Thumbs up!!!!

The 1:1 pics are killer and the build totally matches up and exceeds in some cases! As for the tires...I love the iroks. The swampers are sweet. The pitbulls are saucy, but the Claws with the lug haircut are my vote!!!!! I can guarantee my claws will not look the same from this point on! Great thread, great build!!!

WOW! THE WHOLE THING? Must have taken some patience. And thank you for the generous words. Thank you very much. I still have the claws and will keep em for a rainy day. That trim job in loose dirt is unstopable! And thx again!

tazman · 08-18-2011, 11:58 AM

Da Bulls look killer! Can't wait to see how they do today on the lava. If they work as well as they look, might have to get some.

kaneohecrawler · 08-18-2011, 12:53 PM

Quote:

Originally Posted by tazman

Da Bulls look killer! Can't wait to see how they do today on the lava. If they work as well as they look, might have to get some.

Thx larry! And they sure do make the rig look aggressive. I have pretty high expectations of these. I recomend these to anyone.

kaneohecrawler · 08-19-2011, 01:06 AM

will have some outdoor pics up tom. going to my fav spot so stay tuned!

kaneohecrawler · 08-19-2011, 08:49 PM

SOME ACTION SHOTS OF THESE PITBULLS IN ACTION!

NGreen · 08-19-2011, 09:56 PM

Those look just perfect on your rig Travis. I remember those spots too, quite impressive climbs!

kaneohecrawler · 08-19-2011, 11:28 PM

Quote:

Originally Posted by 53Guy

Those look just perfect on your rig Travis. I remember those spots too, quite impressive climbs!

Thx nick! How's blitz coming?

Bulldog · 08-19-2011, 11:38 PM

If it weren't for the drivers and axles, I would think it was a 1:1! Those pitbulls do look sweet on there! Awesome pics!

kaneohecrawler · 08-19-2011, 11:53 PM

Quote:

Originally Posted by Bulldog

If it weren't for the drivers and axles, I would think it was a 1:1! Those pitbulls do look sweet on there! Awesome pics!

Thx bro! Mahalo..

tazman · 08-20-2011, 01:27 AM

Gotta say I was impressed by these tires. Didn't know you were taking pics while I was thrashing around behind and below you.

Anyway, I may just have to get a set of these, one day.

That was a fun day on the rocks Travis and I only broke one small thing on the EB. Later at Pillbox, I broke a couple things on my other rig.

DRIVNMF · 08-20-2011, 01:59 AM

Quote:

Originally Posted by kaneohecrawler

SOME ACTION SHOTS OF THESE PITBULLS IN ACTION! BEWARE PIC HEAVY

Very impressive! Keep the pics coming...(we need one on the beach with a tourist in a bikini!)

kaneohecrawler · 08-20-2011, 02:00 AM

Quote:

Originally Posted by tazman

Gotta say I was impressed by these tires. Didn't know you were taking pics while I was thrashing around behind and below you.

Anyway, I may just have to get a set of these, one day.

That was a fun day on the rocks Travis and I only broke one small thing on the EB. Later at Pillbox, I broke a couple things on my other rig.

YAHH about that... i went today and took pics lol. but the EB really impressed me yesterday. when you walked that one climb i was like holy shat! my wb is jus to short for that one.

i went back today cause yesterday i noticed i need a major foam tuning so i went back to test em out and it did outstandingly better

kaneohecrawler · 08-20-2011, 05:56 AM

Quote:

Originally Posted by DRIVNMF

Very impressive! Keep the pics coming...(we need one on the beach with a tourist in a bikini!)

thx man! cant believe you quoted all the pics! lol but yah ill try to get some of your request tomorrow. were doin a lil scaling at that location. should have a few more pics and more thoughts on the performance of these tires.

kaneohecrawler · 08-27-2011, 09:25 PM

ok guys is time for change and gonna need a few inputs from you guys to further this thing along..

bayareaaxial hooked it up with a new never touched nb tj body as i was already running so as soon as i got it i started hacking away. making sure to trim only as necessary so there are no gaps n such.. i wanted to go a diff direction with this body ie diff cage diff color and half doors.. so heres where im at.

this is the cage design im goin for.
http://img.photobucket.com/albums/v6...k/DSC02007.jpg
http://img.photobucket.com/albums/v6...k/DSC02008.jpg
http://img.photobucket.com/albums/v6...k/DSC02010.jpg
http://img.photobucket.com/albums/v6...k/DSC02011.jpg

need some ideas for color.........

kaneohecrawler · 08-27-2011, 09:33 PM

all the interior is finished ill get a few more pics. this time everything fits nice, with no gaps and used .080 styrene for front and rear flooring so its much stronger now.

kaneohecrawler · 08-27-2011, 09:35 PM

and heres how it looks with the origional cage and seats n such. just did a test fit of the cage to see how the half doors would look.

kaneohecrawler · 08-27-2011, 09:37 PM

gotta love what a hobby knife and CA can produce. angry joker!

kaneohecrawler · 08-28-2011, 01:22 AM

some more pics of the center console/trans cover.. rear bed is dropped 3/8ths of an inch down to the frame and all is a nice snug fit.
the bed deck is bolted to the frame and the rest is attached to the body and even tho they are 2 seperate pieces the fit is great.

any help or suggestions on paint? i was thinkin yellow or a nice deep orange. not sure tho..

trying to get a hold of trenton to get a 3link truss w/ panhard for the front.

08-19-2011, 08:49 PM	#187
kaneohecrawler RCC Addict Join Date: Aug 2010 Location: wherever paypal sais. Posts: 1,740	SOME ACTION SHOTS OF THESE PITBULLS IN ACTION! Last edited by kaneohecrawler; 08-27-2011 at 09:38 PM.

08-27-2011, 09:37 PM	#199
kaneohecrawler RCC Addict Join Date: Aug 2010 Location: wherever paypal sais. Posts: 1,740	gotta love what a hobby knife and CA can produce. angry joker! Last edited by kaneohecrawler; 08-28-2011 at 01:17 AM.

KC's C2/G6 TJ BUILD... - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jeep scaler build and comp micro crawler build	droopmodmrc	Losi Micro-Rock Crawler	1	12-25-2012 12:34 PM
KC's commemorative build (ACTION PICS!)	kaneohecrawler	1.9 Scale Rigs	87	07-31-2012 12:16 AM
~53 Willys 2010 Comp Rig Build~ RC4WD MOA Worminator Build~	53 willys	General Crawlers	108	11-28-2011 12:42 AM
RC ADVENTURES - KC's BEETLE JUICE V3 Enroute Berg Crawler	RCSPARKS	Videos!	7	06-16-2010 12:30 AM
RcBros LCC Build, Hi-Res pics & More Build!!	RcBro	Team Losi Comp Crawler	30	06-03-2009 07:26 PM

08-17-2011, 11:47 PM	#181
Bulldog I wanna be Dave Join Date: Dec 2009 Location: Outside DC Posts: 2,997	Just went through the whole thread for the first time...Big Thumbs up!!!! The 1:1 pics are killer and the build totally matches up and exceeds in some cases! As for the tires...I love the iroks. The swampers are sweet. The pitbulls are saucy, but the Claws with the lug haircut are my vote!!!!! I can guarantee my claws will not look the same from this point on! Great thread, great build!!!

08-18-2011, 12:26 AM	#182
NGreen Quarry Creeper Join Date: Mar 2007 Location: Sneads Ferry Posts: 430	Looks just right! Told you that you'd love them! Have you had the chance to crawl with them yet?

08-18-2011, 11:58 AM	#184
tazman Quarry Creeper Join Date: Mar 2011 Location: Kailua Posts: 387	Da Bulls look killer! Can't wait to see how they do today on the lava. If they work as well as they look, might have to get some.

08-19-2011, 01:06 AM	#186
kaneohecrawler RCC Addict Join Date: Aug 2010 Location: wherever paypal sais. Posts: 1,740	will have some outdoor pics up tom. going to my fav spot so stay tuned!

08-19-2011, 09:56 PM	#188
NGreen Quarry Creeper Join Date: Mar 2007 Location: Sneads Ferry Posts: 430	Those look just perfect on your rig Travis. I remember those spots too, quite impressive climbs!

08-19-2011, 11:38 PM	#190
Bulldog I wanna be Dave Join Date: Dec 2009 Location: Outside DC Posts: 2,997	If it weren't for the drivers and axles, I would think it was a 1:1! Those pitbulls do look sweet on there! Awesome pics!

08-20-2011, 01:27 AM	#192
tazman Quarry Creeper Join Date: Mar 2011 Location: Kailua Posts: 387	Gotta say I was impressed by these tires. Didn't know you were taking pics while I was thrashing around behind and below you. Anyway, I may just have to get a set of these, one day. That was a fun day on the rocks Travis and I only broke one small thing on the EB. Later at Pillbox, I broke a couple things on my other rig.

08-27-2011, 09:25 PM	#196
kaneohecrawler RCC Addict Join Date: Aug 2010 Location: wherever paypal sais. Posts: 1,740	ok guys is time for change and gonna need a few inputs from you guys to further this thing along.. bayareaaxial hooked it up with a new never touched nb tj body as i was already running so as soon as i got it i started hacking away. making sure to trim only as necessary so there are no gaps n such.. i wanted to go a diff direction with this body ie diff cage diff color and half doors.. so heres where im at. this is the cage design im goin for. http://img.photobucket.com/albums/v6...k/DSC02007.jpg http://img.photobucket.com/albums/v6...k/DSC02008.jpg http://img.photobucket.com/albums/v6...k/DSC02010.jpg http://img.photobucket.com/albums/v6...k/DSC02011.jpg need some ideas for color.........

08-27-2011, 09:33 PM	#197
kaneohecrawler RCC Addict Join Date: Aug 2010 Location: wherever paypal sais. Posts: 1,740	all the interior is finished ill get a few more pics. this time everything fits nice, with no gaps and used .080 styrene for front and rear flooring so its much stronger now.

08-27-2011, 09:35 PM	#198
kaneohecrawler RCC Addict Join Date: Aug 2010 Location: wherever paypal sais. Posts: 1,740	and heres how it looks with the origional cage and seats n such. just did a test fit of the cage to see how the half doors would look.

Sponsored Links

08-28-2011, 01:22 AM	#200
kaneohecrawler RCC Addict Join Date: Aug 2010 Location: wherever paypal sais. Posts: 1,740	some more pics of the center console/trans cover.. rear bed is dropped 3/8ths of an inch down to the frame and all is a nice snug fit. the bed deck is bolted to the frame and the rest is attached to the body and even tho they are 2 seperate pieces the fit is great. any help or suggestions on paint? i was thinkin yellow or a nice deep orange. not sure tho.. trying to get a hold of trenton to get a 3link truss w/ panhard for the front.

RCCrawler Forums

Thread: KC's C2/G6 TJ BUILD...