G-Speed Rigs Only

[Topher Builds]

Since it doesn’t make sense to have a sub for these flat rail chassis options I wanted to start a few general threads where everyone can share their builds, when they don’t want to start their own threads.

So, if you have a gspeed rig post it here and tell us about it

[pcgab]

I recently 'finished' a G-Speed TGH V3 build. I say 'finished' as I'm about to swap the ar44's out for Capra axles.

G-Speed TGH-V3 carbon fiber chassis
GSPEED TGH-V3 electronics tray sliders
Team Garage Hack dual servo mount
Team Garage Hack TGH-HH forward motor mount
With 15% od transfer case
Vanquish driveshafts
Boom Racing top shaft
InTheWorks RC stainless high clearance links
3Brothers RC Yellowjacket 1500kv outrunner
Mamba Micro X
HeyOK No Brainer BEC
HiTec 7955tg
AR44 axles, with cromoly axle shafts, vanquish gears, Locked Up RC FI lockers.
Stock 8/30 gears in the rear, overdrive gears in the front axle
SSD brass knuckles
Brass diff covers front and rear
DLux Dravtech short shocks, soft springs in fron, medium in the rear, IIRC
Pro-Line Power Wagon body shell, cut down quite a bit.
Salinas Design power wagon drop bed.
Current wheels are chinese aluminum beadlocks off Amazon.
Crawler Innovations foams, CWR-2024 front, CWR-2025 rear.
Pro-Line tires, Hyrax and Krawler KX's, both in predator compound.
The Crawl Space stinger front bumper, and one of their shorter front bumpers on the rear.

I'm switching to capra axles with TGH OD portal gears, vanquish main gears, fi lockers, Super Shafty rear link riser, and brass knuckles/portal covers in the front. I'm also switching to Hardcore RC titanium links made for the G-Speed with capra's.

I am absolutely loving this rig, it's teaching me so much, and bringing hours of enjoyment.

Cheers,
Gable

ps, I have since painted the brass diff covers black, as the shiny brass was annoying me...

[Topher Builds]

I feel ya. These are never really finished are there. Great build though and please keep us updated on the changes you make


Here’s my gspeed...
Carbon fiber v3 rails
Tgh FMM and T case with 15% od
Od ring and pinion in front
Ssd axles
Ssd brass knuckles
Brass chubs
Hh snubnose revolver 2040kv
Mamba micro x
Hh v3 servo
Element Rc shocks
Incision drive shafts
Boom racing top shaft
Mst jp1 body

[Lashlee]

I'll get some pics posted this afternoon but here's the lineup of my GSpeed:

GSpeed CF chassis
GSpeed LD Lay down servo mount
GSpeed G-MP panhard mount
GSpeed sliders
TGH 2.low trans
Beef Tubes Enduro hard front axle
SSD Front brass knuckels
SSD Aluminum C Hubs
SSD aluminum diff cover
Enduro Hard rear axle
SSD rear axle weights
SSD aluminum diff cover
Enduro RTR shocks
Enduro MIP driveshafts
In the works SS high clearance links
HH SHV500v3
HH Snubnose Revolver 2500kv
CC Sidewinder 4
SR515
MST JP1 body (I just realized Topher has the same body!)
SSD Assassin wheels PL Krawler T/A's in Predator
Custom front bumper
5.8 pounds ready to run

Overall I'm really impressed with this setup. I took it out for the first time last Friday to my local spot, to a particular rock that my Capra could do with ease but my old Enduro had trouble with, and it easily passed it with flying colors!

[Lashlee]

Here are a couple of pics

[TK421]

My work in progress...

[Lashlee]

What front bumper are you using on your build TK421?

[Topher Builds]

great pics Lashlee! Looking real good.

[TK421]

Originally Posted by Lashlee

What front bumper are you using on your build TK421?

In the pics is a highly trimmed CRC bumper from a 10.2 kit build. I’m not sure what I’m going to end up using. I’m knee deep in a Mojave body for it. I’ve got the cab pinched. I’m now waiting for the bed to show up so i can get it dovetailed and mounted. I’ll post some better pics later today.

Lou

[Lashlee]

Thanks Topher!!

And thanks TK, I'll be on the lookout for a cheap on used.

[TK421]

Originally Posted by Lashlee

Thanks Topher!!

And thanks TK, I'll be on the lookout for a cheap on used.

Send me a PM with your address and I'll just send you one of mine.


Here is how my rig sits at this moment. The mojave bed is arriving today as well as a couple other minor parts I've been waiting for. I'll post more as I progress.






Lou

[pcgab]

I'll post a few updated pics with the Capra axles now installed.

[Lashlee]

Originally Posted by TK421

Send me a PM with your address and I'll just send you one of mine.


Here is how my rig sits at this moment. The mojave bed is arriving today as well as a couple other minor parts I've been waiting for. I'll post more as I progress.

Lou

Thanks man!! PM coming your way!

[Rcing4life]

My Gspeed power wagon and Scx24 mini wagon belly crawler

[mikemcE]

Body Mounting Gentlemen??? I’ve got a Sherpa chassis coming for BEA.

I’ve got a F100 body but want a Power Wagon..... so I’m open to ideas


Hang up and Drive

[pcgab]

Originally Posted by mikemcE

Body Mounting Gentlemen??? I’ve got a Sherpa chassis coming for BEA.

I’ve got a F100 body but want a Power Wagon..... so I’m open to ideas


Hang up and Drive

The Salinas flatbeds make great bases to mount your body to. I have both their drop bed and flat bed for the G-Speed chassis. For the Power Wagons on G-Speed chassis, it's a great option.

For the front I got some of the body mount things G-Speed sells, I used an axial body post in it, cut down to fit.

[pcgab]

Originally Posted by Rcing4life

My Gspeed power wagon and Scx24 mini wagon belly crawler

Those both look fantastic! I love the roof rack and lights on the big wagon. Well done

Cheers,
Gable

[pcgab]

My 'loaner' rig, G-Speed V3 chassis, ar44's, etc. Fun little beast:

[dezfan]

•••THE MINION•••

Associated Trophy Rat body w/ custom cut
G-Speed Carbon V3
Element RCStealth X w/ 12% OD
ElemebtcRC Enduro Shocks
Axial Capra Axles
Samix Titanium high clearance links
Savox 1230 Servo
Hobbywing 1080
Ovonics 3S 650 mah Lipos
GT3C Tx/Rx
Reedy 5 pole 16T motor
Pro Line Hyrax (Predator) or JConcepts Land Mines (Green Dot)
Chanquish 1.9 Method Wheels
Vitavon brass knuckle weights

Little video from today from Crater Nation AZ.

https://www.facebook.com/groups/2232...6005823154751/

More pics.

[Topher Builds]

That’s real cool Dez! Nice line in that video there too. Good chunk of rocks there to play on.