03-09-2015, 09:23 AM | #161 |
I wanna be Dave Join Date: Aug 2006 Location: under a rock and a hard place
Posts: 5,443
| Re: Szczerba's 2.2 XTV
Totally missed this build, nice work as always |
Sponsored Links | |
03-09-2015, 09:30 AM | #162 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: Szczerba's 2.2 XTV
Nice job broski! I see that bandsaw is really working for ya.. |
03-09-2015, 12:43 PM | #163 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Szczerba's 2.2 XTV Didn't miss too much. Just a belly dragging "cheater rig" as most would describe it. It has paid for itself 3 times over already. Opened up my fabrication skills (if you wanna call it that) a little bit more. |
03-09-2015, 01:14 PM | #164 | |
RCC Addict Join Date: Jan 2010 Location: Vermont
Posts: 1,011
| Re: Szczerba's 2.2 XTV Quote:
In the real world, an Unlimited buggy will crawl better then a full-bodied rig. Just what people prefer, I guess. Haters I tell ya, haters. | |
03-09-2015, 01:36 PM | #165 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Szczerba's 2.2 XTV I dont know either. I've had it at two big comps and other events and get that comment quite often. I know guys are generally kidding though. I just reply with "you can buy a welder and build one too". Probably not the best response but a smarta$$ comment gets a smarta$$ reply |
03-09-2015, 01:59 PM | #166 |
RCC Addict Join Date: Jan 2007 Location: Bouldertown
Posts: 1,554
| Re: Szczerba's 2.2 XTV
Losers always look towards the other person who had an advantage. Winners are created because they look at themselves and strive to be better. If I lose its because I did not drive my best. If I drive my best and my rig don't cut it. I improve or build a new rig. Simple as that. There is no "cheater" rigs. Your rig is either legal or its not. |
03-09-2015, 03:55 PM | #167 |
I wanna be Dave Join Date: Nov 2007 Location: Memphis
Posts: 4,786
| Re: Szczerba's 2.2 XTV
I call it a cheater rig with cheater tarrs because I love trolling Szczerba. But he's my breh. And because it drives like a berg not a good one but a berg none the less. Sweet rig. |
03-09-2015, 04:37 PM | #168 |
I wanna be Dave Join Date: Jul 2010 Location: Toronto
Posts: 2,389
| Re: Szczerba's 2.2 XTV
Nice truck? Yes. It's a nice truck. Great fabararting sir. |
03-10-2015, 08:35 AM | #169 |
Rock Crawler Join Date: Dec 2012 Location: Utah
Posts: 955
| Re: Szczerba's 2.2 XTV
Damn good looking cone dodger. The Blue and Silver really sets is off!! |
03-13-2015, 01:29 PM | #170 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: Szczerba's 2.2 XTV |
03-13-2015, 01:38 PM | #171 | |||
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Szczerba's 2.2 XTV Quote:
Quote:
My day is complete after a fine craftsmen such as yourself would speak that way of one of my junk piles on wheels. Quote:
I forsee an upsizing of a currently offered TSS wheel?! | |||
04-16-2015, 08:14 PM | #172 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Szczerba's 2.2 XTV
I jacked up my KMS K3 Free Spool winch so I grabbed another for this rig. KMS has graciously offered to look an see how much damage I did to the old one. I will waterproof the new one this weekend and mod the case a little where the spool and case meet. Line can get tangled sometimes. Had an old mamba max that I waterproofed and using it for a winch controller. Losi MRC controller went to another rig. |
04-18-2015, 06:35 PM | #173 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Szczerba's 2.2 XTV
Following Metal Masher's lead on waterproofing the KMS K3 Freespool winch. Actually, the design lends itself to waterproofing pretty good. Painted a piece of styrene to block off motor area. e6000 it into place. Oring and dielectric grease where part of spool meets up with case. Oring in front of free spool shaft case bearing. Case sealed up with E6000. Bam, waterproofness. |
04-19-2015, 09:13 AM | #174 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Szczerba's 2.2 XTV
CI Wheels de-glued, tires cleaned up and CI foams drying. Hmmm...? |
04-28-2015, 01:06 PM | #175 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Szczerba's 2.2 XTV
Truck did good at the Rocky Mountain Scale Nats. Not sure where I placed but had a ton of fun driving it. New TSS 2.2 Hutchinson internal beadlocks for the event. .185 Locked Up hubs |
05-05-2015, 07:49 PM | #176 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Szczerba's 2.2 XTV
XTV on course at the Rocky Mountain Scale Nationals. Caleb does good video work. 1080p it. XTV is around the 0:59 minute mark, hold on! |
05-05-2015, 08:26 PM | #177 |
Quarry Creeper Join Date: Dec 2011 Location: Gold Coast, Australia
Posts: 290
| Re: Szczerba's 2.2 XTV
Love seeing the XTV doing work! I'm adding rear steer to my 1.9 c3/u4 very soon so I can keep up with all the bigger 2.2s but more for a bit of fun. Any pointers for setting it all up? Its on xr width ar60s And for when the u4 meets come I'll swap the rear steer back for straight shafts and lockouts. |
05-05-2015, 08:35 PM | #178 | |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Szczerba's 2.2 XTV Quote:
Right now I have the rear steer setup on my 4pks on a 3 position rocker switch. It is setup for full throw with on tap or full throw either side. I like mine like that but I could add "steps" into the setup and I could get a little turn with one tap, then more with another tap, etc until full lock either way. I just prefer to have all throw at once, some others dont. Right now, I just have the rear servo plugged directly into the rx, as the front is direct wired to the bec with a Holmes bypass adapter. | |
05-05-2015, 08:58 PM | #179 | |
Quarry Creeper Join Date: Dec 2011 Location: Gold Coast, Australia
Posts: 290
| Re: Szczerba's 2.2 XTV Quote:
What servos do you run front and back? | |
05-06-2015, 09:02 AM | #180 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Szczerba's 2.2 XTV Protek 170t up front and the Holmes BLS out back. I did have a failure with the Holmes servo at the event but I am working with them to see what happened with it.
|
Tags |
#trollinszczerba |
Szczerba's 2.2 XTV - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Szczerba's 1.9 Ultra4 | Szczerba | 1.9 Scale Rigs | 31 | 01-24-2016 11:31 AM |
Szczerba's Samurai | Szczerba | 1.5 Scale Rigs | 132 | 01-07-2015 08:40 PM |
Szczerba's Comanche | Szczerba | Axial SCX-10 | 34 | 02-19-2014 10:37 PM |
Szczerba's FF-SZ 2.2s | Szczerba | Axial AX-10 Scorpion | 389 | 06-11-2013 08:30 PM |
szczerba's f-toy | ROLANDROCKSHOP | Scale Videos! | 4 | 05-24-2012 09:12 AM |
| |